How to configure CFC | Digsi-4

For I/O masking you can following here
Part-1 configuration
How to do configuration in I/O masking you can see in this link
• how to do configuratio...
How to create IEC 61850
• How to create IEC 6185...
Here i have give brief explain about
1.how to use DM decod function block
2.How to connected between to gate
3.How to make inter-connected between two sheet
4.how to you DP signal in &
5. how to save.
if you want to use DP with feedback. it must to be configure the feed back to binary inputs
With the feedback trigger the block to activate.

[@jvignerte]

You are very kind to share this information, may life pay you back double. Best regards

[@baranitech]

Thank you too

[@jatinkumarpatel2269]

Great Sir, Explained quite nicely!

[@baranitech]

Thanks and welcome

[@biswaljayanti665]

Very good job

[@baranitech]

thank you

[@ashishrajput8950]

Sir, i need your help...Cfc not initialise.. Below error come. (257:5) One or more objects or a type cannot be represented. Server's7jomcsx.dll'_S7J_ECPLAN_CT objects could not be loaded. Make sure the required software packages are installed. I was tryed digsi 4.93,94,95,96. Same error come on windows 10.

[@baranitech]

SOME FILE Could be clashed on Register, try to formatted os and then install digsi software thank you

[@khaledeid2508]

how I can send a command over IEC 61850 using logic ?!! what is the input for this block ??!!

[@baranitech]

for IEC 61850 receiving can be done in I/O routing with selecting data sheet.

[@shahidlatif2421]

Dear Sir thanks for sharing good Knowledge. Sir cfc chart not open on my laptop. How can i open cfc chat even cfc input and output Configured

[@baranitech]

Any message coming

[@shahidlatif2421]

@@baranitech sorry for late Sir when I click on cfc setting and click on cfc nothing happened. Even can't insert new cfc chat.

[@baranitech]

@@shahidlatif2421 did you checked for other types of relay

[@shahidlatif2421]

@@baranitech yes I checked but didn't work.

[@baranitech]

@@shahidlatif2421 please try to reinstall software

[@AdnanJayyousi]

I cant see CFC in my list and also I am not able to add CFC chart, why ?

[@baranitech]

type of version you choose may be different. try to check with other MLF version of the relay. thank you

[@noufi043]

Hi sir I need to make cfc logic for voltage healthy condition. That is if voltage is healthy the one of the BO should be high. Please guide me to make that

[@baranitech]

Step-1 :Do configuration for MV type UL1E --L3E in Measurment function from masking IO to CFC Step2: IN CFC use Lower set point block it will be inside comparison . on that you can set vaule and configure for your voltage healthy condition. if you want i will make video for you ..

[@noufi043]

@@baranitech ok thank you let me try.

[@noufi043]

Sir can you make a video on it i need BO 7 high when voltage is healthy please send to WhatsApp [phone]

[@baranitech]

kzbin.info/www/bejne/sGbOi6eshKeFjq8 i made for you

[@noufi043]

Thank you sir will you please give your contact number

[@omarzedan1261]

Hi please, how to enable or disable CFC in run time dynamically???

[@baranitech]

i will check

[@omarzedan1261]

@@baranitech dear friend there is no way to disable run time dynamically in sipeotec 4 you can use the command (cancel command) to disable command not all the cfc chart. I appreciate your kind replay friend.

[@surya-pc7nx]

Please make timer functions like on delay and off delay timer usage in CFC functions.

[@baranitech]

i will make for you soon

[@alanfigueiredo5233]

Please, can teacher or someone help me? I don´t know what means TNC, TCS, 86Opt. help me please!

[@baranitech]

i will make video regarding this

[@alanfigueiredo5233]

@@baranitech Thank you very much, i`m looking forward about that!

[@tanmoyghorai4751]

Can you please explain how to configure timer in CFC thanks in advance

[@baranitech]

i will make for you

[@vipsingh908]

Pls make cfc for auto re close .. this protection not working ..some error in logic

[@baranitech]

soon i will make

[@hishamhussein4399]

Hi sir, after i click on compile button, its pop up a message "Process Completed with warnings". . after that download the program into siprotec, then Error led lights up. Is the warnings can trigger the Error led ?

[@baranitech]

normal the warning will not make error on relay . but when you compile you should not get error on digsi . once compile go for run sequence. to min the warnings.

[@hishamhussein4399]

@@baranitech ok noted with thanks sir.. 👍