How to configure Mlag in Arista EOS switches - Multi-chassis Link Aggregation Lab Guide
Рет қаралды 4,490
Күн бұрын
@roopeshsn 3 ай бұрын
Informative video! BTW, which tool you're using for the lab simulation?
@SivakumarNetLabs 3 ай бұрын
@@roopeshsn it’s virtual switches running in Esxi server
@roopeshsn 3 ай бұрын
@@SivakumarNetLabs Ohh, ok. Do Arista have a simulation tool like CML?
@demonmaestro 2 ай бұрын
@@SivakumarNetLabsWhere you getting the software for the virtual? Can it be ran in proxmox?
@dyadaval 10 ай бұрын
why mlag4 was needed here?
@fddi73 10 ай бұрын
why you set interface Eth1 nd Eth2 switchport acces vlan 10 instead of switchport mode trunk ?
@dyadaval 10 ай бұрын
just a though: client/server traffic wont carry multi vlan traffic right? So switchmode trunk, wont help. Typical access/host traffic should do
@fddi73 10 ай бұрын
@@dyadaval thanks for your answer, appreciatd. On my setup I set it as switchport mode trunk so I Was just wondering why you opted for access because it is true MLAG peer link mostly carries control traffic but it can carry data traffic in the eventuality that devices connected to one of the MLAG peers have no alternative path, in that case VLAN traffic has to use the peer link and if the port are not in trunk mode traffic won't go through
Our Technology Planet
Рет қаралды 6 М.
SivakumarNetLabs
Рет қаралды 7 М.