How to configure the GSWave app with a Grandstream system

[@aloverofnature1688]

I would love to know if this setup would work with a cell phone data-only plan.

[@DJmessedup]

Thank you for a good vid man, please help me tho... the mail I get only shows my internal IP, I've also tried setting up the software manually but can seem to get the device connected to the SIP account..

[@n-p2048]

Hey, thanks for the informative video. I tried your steps but, my app is not showing the extension status as green which means available. In the grandstream IPPBX server page->extensions, status it is showing unavailable and in the app it shows 'Registered Failed to SIP' in the notification bar. Kindly help me with the trouble-shooting as there are not many resources for this. Thanks! P.S.: Also, as I live in India we don't have VoIP services, so do we need VoIP service for this? I don't think so but that's the only thing different.

[@n2vSolutionsLLCWinona]

Sorry for the delay. You are correct, you do NOT need VoIP for this to work, but it does use SIP to connect the base to the phone system. The first thing I'd verify is that the firmware is up to date. That removes a lot of issues right away. From there I can't do a lot without seeing what you are seeing.

[@gopolangchuma8547]

hi. do have a video on how to setp E1 line?

[@n2vSolutionsLLCWinona]

I do not have a video on that. It is not something commonly used in our area.

[@davidanderson3509]

Interesting softphone. Thanks for the instruction. Anyone know how to keep the desk phone and softphone activated at the same time? I made sure I had concurrent registrations set to 2 but yet only the softphone works and disables the GXP2130 or if I reboot the 2130 it disables the softphone. Would be more beneficial if both would stay registered and ring at both places.

[@FirstnameLastname-fy7bl]

This is what my email looks like 🌫🌫🌫🌫🌫🌫🌫🌫🌫🌫🌫 🤣

[@alimibrahem8120]

Please my sir, can you tell me how can i set the firewall in ucm in order for this fo work, i do as you do but the account still un register, so please if you can send anylink or method to how i can set the firewall.. Thanks in advance.

[@maddy7691]

I can receive call normally but when I try to call any number I get 403 forbidden error

[@mahajanpankaj7121]

Exactly i looking for, VOIP technology is my hobby , Can we do same thing with NCH Axon Virtual PBX by adding GSWave app/Bria app in android phone, main thing i want to know the router setting, 1st. UPnp is active. 2. Network forwarding settings of router is main "Any best tutorial" please suggest me.

[@josephcabayacruz9249]

when i tried to scan the QR code from my wave app it said Invalid QR. why is that??

[@mozton4685]

Buenos Dias, cuando completo la configuracion de Email e intento enviar el correo no tengo ninguna respuesta, no me llega el correo, me podria ayudar con ese problema. Saludos!

[@Vankardia]

Tienes que configurar el servidor de correo de la pbx. O sea, configurar un correo a la pbx para que pueda enviar el correo que esperas. Esto es en: Ajustes del Sistema -> Configuraciones de correo/email

[@Baytelephones]

You told you will not explain the firewall part which is the biggest problem and whatever youve explained any tom dick and harry whos in this field could easily do this hope you would post that one...

[@n2vSolutionsLLCWinona]

It would be a port forward for call setup and another for the RTP ports. I'll put that video on my list.

[@n2vSolutionsLLCWinona]

defaults are as follows but can(and should) be changed: forward 5060 UDP to UCM for call set up and registrations, forward 10000-20000 UDP to UCM for audio streams, and SIP ALG should be off.

[@Baytelephones]

Thank you yes i knew this but some isps doesn't allow to open certain ports on their supplied ipadds.Though ive done the above not able to call extensions out of office.

[@n2vSolutionsLLCWinona]

Then the issue would need hands on troubleshooting and is more than I can answer here.