How to Configure the PanelView Plus 7 Performance Series B

This video will demonstrate how to configure the new PanelView Plus 7 Performance Series B. It will guide you through the initial steps to configure this terminal out of the box and include discussion of the new major improvements and features that are not available at the initial release.
Relevant Links:
PanelView Plus 7 Performance Series B Terminals Quick Start
literature.roc...
PanelView Plus 7 Performance Series B Terminals Important Information
literature.roc...
PanelView Plus 7 Performance Terminals User Manual
literature.roc...
PanelView Plus 7 Performance Terminals Technical Data
literature.roc...
Applicable Catalog Numbers:
2711P-T7C22D9P, 2711P-T7C22D9P-B, 2711P-T7C22A9P, 2711P-T7C22A9P-B, 2711P-B7C22D9P, 2711P-B7C22D9P-B, 2711P-B7C22A9P, 2711P-B7C22A9P-B, 2711P-T9W22D9P, 2711P-T9W22D9P-B, 2711P-T9W22A9P, 2711P-T9W22A9P-B, 2711P- 10C22D9P, 2711P- 10C22D9P-B, 2711P-T10C22A9P, 2711P-T10C22A9P-B, 2711P-B10C22D9P, 2711P-B10C22D9P-B, 2711P-B10C22A9P, 2711P-B10C22A9P-B, 2711P-T12W22D9P, 2711P-T12W22D9P-B, 2711P-T12W22A9P, 2711P-T12W22A9P-B, 2711P- 15C22D9P, 2711P- 15C22D9P-B, 2711P-T15C22A9P, 2711P-T15C22A9P-B, 2711P-B15C22D9P, 2711P-B15C22D9P-B, 2711P-B15C22A9P, 2711P-B15C22A9P-B, 2711P-T19C22D9P, 2711P-T19C22D9P-B, 2711P-T19C22A9P, 2711P-T19C22A9P-B, 2711P-T9W22D9P-BSHK, 2711P-T12W22D9P-BSHK, 2711P-T7C22D9PK, 2711P-T9W22D9PK, 2711P-T10C22D9PK, 2711P-T12W22D9PK, 2711P-T15C22D9PK, 2711P-T19C22D9PK, 2711P-B15C22D9PK, 2711P-T12W22D9P-BM001, 2711P-T12W22D9P-BM002, 2711P-T12W22D9P-BM003, 2711P-T12W22D9P-BM004, 2711P-T12W22D9P-BM005, 2711P-T12W22D9P-BM006, 2711P-T12W22D9P-BM007, 2711P-T12W22D9P-BM008, 2711P-T12W22D9P-BM009, 2711P-T12W22D9P-BM010, 2711P-T12W22D9P-BM011, 2711P-T12W22D9P-BM012, 2711P-T12W22D9P-BM013, 2711P-T12W22D9P-BM014, 2711P-T12W22D9P-BM015, 2711P-T12W22D9P-BM016
CONTACT US!!
Website: kendallelectri...
Subscribe on KZbin: / kendallelectric
Facebook: / kendallelectric
LinkedIn: / kendall-electric
LEGAL DISCLAIMER:
By accessing, browsing or using this website (the “Site”), any user of this Site (“User”) agrees to be bound by The Kendall Group’s Terms of Use (www.kendallgro.... The material provided on or accessed by way of this Site is protected by law, including without limitation, United States copyright laws and international treaties. This Site is controlled or operated by The Kendall Group from its offices within the State of Michigan, United States of America. A User who accesses this Site from locations outside of the United States does so on his/her own initiative and is separately responsible for compliance with any applicable local law on internet usage and website access.
Information on this Site may contain inaccuracies or typographical errors, and The Kendall Group assumes no liability for, and reserves the right to correct, any such inaccuracies or errors at any time. Information on this Site is provided “AS IS” and The Kendall Group cannot and does not represent or warrant that information on this Site will be error-free, up-to-date, comprehensive or complete, or otherwise meet your requirements, or those of your customers or business partners. In accordance with the Terms of Use (www.kendallgro..., The Kendall Group disclaims, to the maximum extent allowed by law, all express and implied warranties with respect to information and to the products described on this Site, including implied warranties of non-infringement, merchantability and fitness for a particular purpose. The Kendall Group may also make changes, updates and improvements to this Site or the Terms of Use (www.kendallgro...) at any time without notice.

[@DaDaDaddeo]

Great presentation. Perhaps a walk through for the WINDOWS 10 IoT features. I usually have the VNC and File Server functions turned on for remote support purposes where anyone's laptop connected to the panel can allow me to see and also continue other configurations over the internet.

[@LeoTseng8077]

This video solved my problem,Thanks

[@josedejesusdeltoro3817]

Excellent reference thanks for your video

[@ducttape1024]

If you are unable to ping your HMI on these new models it is because it is turned off by default. After you reset the HMI you will want to press EXIT and put in the password you created, It will bring you to a windows 10 desktop, you'll want to press the gear at the bottom left, then press services, then on the Ping Response (ICMP) and turn it on, you can then press the 'X' in the bottom left and it will bring you back to the AB screen

[@danbelisle3355]

just ran into this problem. thought i was going crazy when i couldn't ping it.

[@edgarcarrillo1545]

Did it also ask for a user password?

[@ducttape1024]

@@edgarcarrillo1545 any passwords it asked for was the passwords you put in while setting up

[@bramptonfinest6558]

Wow thank you for this as I had no clue that it was turned off.

[@antonioprado8494]

Thank You so much Dan!!

[@SolemnRapier]

Thanks!

[@ballackstorm11]

Thanks for the info mate!

[@luisenriquecortesbenitez7481]

Great video...

[@erinriva1178]

Hello Dan, were you ever able to setup a Series B on LDAP for Authentication? We are having many issues with this process; only series B panels give us issues. Series A works fine.

[@VICPASTOUCH]

Thanks for sharing such a useful video. however, my terminal stuck on the password in the very first beginning, could you kindly share how to reset the termainl? I had tried press F1 but no working. Thanks again for your help.

[@tungtruong9232]

I ha e the same trouble, get stuck at password in the first beginning

[@oscarlara122]

Thanks for your info I appreciate. I would like to know if you have any information to get a conection between and nv controller (toshiba) and this panelview plus 7 series b through kepserver?. I can't comunicate but the weird thing is that i did the same process in a panelview plus 6 and there comunication works.

[@anthonyrutland4134]

I cant get mine to accept the ip address. After reset it still shows all zeros. Any idea why that would be? Not my first rodeo and followed all steps exactly as described. Thanks!

[@kvgilliam]

If an ethernet cable is not connected it will not show the IP information.

[@edo6053]

Great video, can you helpme with one question, How can I transmit the HMI to my laptop using VNC? I already enable the VNC option and Ping. The HMI reponse if I send a ping but VNC doesent connected. Thaks for the information.

[@MaxihVG]

Series B doesn't have VNC

[@aitkja]

@@MaxihVG It does now with latest firmware. You can then enable it in the advanced windows 10 menu of the PanelView.

[@glenmcbain1954]

I tried enabling it on the windows screen, it accepts it but I can still not connect with VNC on my laptop?

[@kwesiprah4971]

After setting up the panelview and set static IP, I cannot ping IT. Any advise

[@ducttape1024]

doubt you need this anymore but I left a comment here because I had the same issue "If you are unable to ping your HMI on these new models it is because it is turned off by default. After you reset the HMI you will want to press EXIT and put in the password you created, It will bring you to a windows 10 desktop, you'll want to press the gear at the bottom left, then press services, then on the Ping Response (ICMP) and turn it on, you can then press the 'X' in the bottom left and it will bring you back to the AB screen"

[@jayferrante1434]

Yea, how did you have the ip address, you skipped a step, not helpful

[@ducttape1024]

he goes over it at 10:00