How to configure Xiaomi MI Wi-Fi Range Extender AC1200 as Access Point

#xiaomi #mi #mifi #mi ac1200
#How to configure mi wifi extender as accesspoint
Mi Wi-Fi range extender ac1200 connect with any modem . Steps as follows
1. Put your main modem and mi extender into a power outlet
2. Keep each one close together
3. Download and install “Mi-home” application in your mobile and activate using your phone number or email
4.Connect to main modem using wifi username and password
5. Open “Mi-home” Application and follow steps as directed
6. Enter password of the main modem .when asked the application
7. Switch to phones wifi menu and connect to extender
8. Go back to “Mi-home” application and wait for complete setup
9.Switch to AP mode. wait for settings to be effect
10. After finished ✅ a message will showed and two blue light 💡 will shown on range extender
11. Check the wifi menu and connect to extender and check internet
-end-
techdoxs.blogs...

[@bausini7036]

Is this working a bridge mode or is giving a different loc ip from the main router?

[@dementor2003]

I have a really irritating issue. My extender is not connecting to my Huawei 5g wifi. It connects fine with 2.4 G. Do you have a solution for this? I have tried all channels on the huawei 5g wifi network.

[@mcdcello]

Excellent video, slow paced and clear

[@DoTechRescue]

Glad it helped!

[@adijayasakti8149]

If you have AP mode, can you expand it by adding another extender?

[@DoTechRescue]

Yes .you can

[@WaRn00b85]

Very helpful video! Thank you!

[@jootpepet]

The 2.4ghz (pro version) of this extender dosnt have ap mode?

[@venkateshwaranp5872]

How to setup for 2.4ghz as well as 5 ghz mode by making username and password please guide me. When i am trying to connect it shows connect to amplifier

[@DoTechRescue]

Check the video again!

[@mohammedsulaiman2470]

شرح جيد الفيديو. عمل جيد تتوقع المزيد من مقاطع الفيديو منك.

[@DoTechRescue]

شكرا لك على رسالتك . سأبذل قصارى جهدي

[@ronik1974]

It's not working fir me as AP, I connect 60m cat6 cable, from my home at 7 floor to my car place and connected the xiaomi there, getting a message signal low , no internet access. What I'm doing wrong?

[@DoTechRescue]

Watch video again. I have mentioned how to make it AP mode . Carefully watch video

[@andreacesaro757]

thanks, you save me!

[@ZahirZH]

salam , please max speed access point WIFI is 100M ?

[@DoTechRescue]

Please check root router speed .

[@ZahirZH]

@@DoTechRescue th rj45 port support only 100m speed

[@theamazingkuyablu0313]

We just bought our Mi Wi-Fi Ac1200 today, we installed it but sadly it doesn’t appear in my mi home application. So ending walang nangyari sayang lang pera. 😢

[@DoTechRescue]

Please send screenshots telegram @dotechrescue

[@kakaistv2833]

not working mine . huhu

[@DoTechRescue]

Settings is little complicated. Please watch video tutorial again and try... Will work

[@biancajose1127]

How to do the access point. Its not working. Do I need internet port?

[@biancajose1127]

When I click AP mode, the extender is disconnected.

[@DoTechRescue]

Mi AC 1200 work Either AP mode or Extender mode at a time.

[@DoTechRescue]

Yes. Put the eithernet cable on lan port. Switch to AP mode

[@biancajose1127]

After I changed the password, can I remove the enthernet cable? So that I can use it again as wireless extender?

[@DoTechRescue]

@@biancajose1127 once you changed into AP mode . The extender word as a access point. If you use again it as a extender! You have switch to Extender mode

[@JanedeniseMarundan]

Nd nagana sayang lng pera ko

[@kakaistv2833]

Humana naba sayu? hindi talaga sa akin huhu

[@JanSaffar]

Dont waste your moneyyyyyy