TP-Link RE450 Wi-Fi Extender • Access point mode installation and configuration

[@trafegon]

USEFUL LINKS Setup: kzbin.info/www/bejne/kJfZnHZtppakatk Access point setup: kzbin.info/www/bejne/gWXclmRtmMesrpo Admin panel: kzbin.info/www/bejne/nqDdo2mlntqKotk Firmware upgrade: kzbin.info/www/bejne/aoacnZJ4p8isi9E Reset: kzbin.info/www/bejne/bZWUoXqwaNt_nq8 Price on Amazon: amzn.to/48L5CVC Speed test: www.trafegon.com/speed-test.php

[@bhupeshdewangan9393]

Thank you 👍 it worked for my TP Re450, thank you so much

[@trafegon]

Thanks to you for watching! ;-)

[@Fa9ooly323]

Great tutorial... Clear & straight to the point! Thanks!

[@trafegon]

Thanks to you for watching! ;-)

[@jcortega6419]

Is it necessary to connect the repeater with the ethernet cable?

[@trafegon]

If you want to use it like a repeater yes, if you want to use it like a repeater you have to watch this video: kzbin.info/www/bejne/kJfZnHZtppakatk

[@TejalLive]

stetic ip wala setup nhi ho reha plz help

[@bigmanbubbles7916]

Great video it helped alot however i have a question. I connected my extender to a network switch to give myself internet to an outside summer house and made it an Access point by watching your video but the devices that are connected to the network switch now use the extender as the main Wifi not the origional router. Could you help explain this?

[@Divine-IQ]

Great video! Which one do you recommend as a repeater in terms of reliability, steady signal and secure connection: this one or the fritz 1200AX?

[@Brenda-y5e]

Thank you for the tutorial - this was very helpful.

[@trafegon]

I'm happy to have been helpful to you! Thanks for watching! ;-)

[@Diagonal011]

My main router tplink archer c6 v4 if i connect re200 ac750 mesh supported extender with ethernet connection Then one mesh will work?

[@JOSEMIGUELSANCHEZLOPEZ]

Question friend, does the port that has Ethernet work to connect it to a PC? does it transmit connection to the device or is it only to configure it from the modem? Greetings, good job.🎉

[@gursimransingh4111]

Does this access point support DFS and 160MHz channel width?

[@ghostsintheforum]

It has DFS but it’s problematic. Does not have 160Mhz.

[@luchogonzalez4915]

This was very helpful. Thanks a lot!

[@trafegon]

Thanks to you for watching! 😉

[@shiva123pass]

Good job bro..worked for me

[@trafegon]

Good! I'm glad I could help! Thanks for your feedback and for watching!

[@shiromanisinghbhati5485]

Super helpful dude . Excellent

[@trafegon]

I'm happy to have been helpful to you! ;-)

[@nutloaf]

Does it mean I can connect a 30 foot ethernet cable to the tp-link into my router and have the tp-link upstairs providing wi-fi?

[@radu97theone1]

For some reason i cannot connect to the Wifi after switching it to AP mode. Will try with a PC, only tried with phone and Ps5

[@ghostsintheforum]

Was it previously setup in extender mode?

[@radu97theone1]

@@ghostsintheforum you are correct 👍🏼

[@ghostsintheforum]

@@radu97theone1 if you haven't resolved it yet, try doing a factory reset. then assign it a static ip address on your router. then do the initial setup (after factory reset) as an access point.

[@ahmadalizadeh2360]

Thanks for your good clip

[@trafegon]

Thanks to you for watching!

[@Saaler1284]

awesome. thanks!

[@trafegon]

Thanks to you for watching! ;-)

[@scrimz8002]

Doesn't work in UK. Use the Tether app.

[@nutloaf]

Does it mean I can connect a 30 foot ethernet cable to the tp-link into my router and have the tp-link upstairs providing wi-fi? But using the Tether app for set-up instead? My wi-fi is terrible upstairs and where I need to plug a tp-link is out of range of the router.

[@TheCollabCurator]

Good job bro

[@trafegon]

Thank you!