How To Connect A 5 Litre Mini Keg To A Pint365 Beer Engine

[@147bentaylor]

Sorry but i was laughing quite a bit watching this! started like a comedy sketch show lol

[@OysterBoysBrewingCo]

*World explodes* “It’s not too bad, it’s not too bad.”

[@Lo_Boon]

i've seen i've definitely seen worse

[@jonparry6462]

It might work better if you open the red tab to release the pressure, then close it back up. Leave it 20min and repeat until the carbonation is reduced. Then you'll be able to pull it through the engine without crazy amounts of foam. And maybe removing the sparkler would help too.

[@iscrivens]

Yeah, I was thinking the same

[@Harbourmaster68]

@@iscrivens me too

[@craigsmedley990]

I reuse mini kegs for my homebrew,easy to use 365 if u vent then pour off using the inbuilt nozzle half a pint then pull the red tab out push in pipe and pull gently. If the mini keg is well carbonated best draw off some more, can also get grey bungs to replace the red/black ones which have a 10mm hole same as pipe or ive also got party keg tap which slides in and can add co2 to dispense like a pro.

[@UnixAnt]

Experiment with different size sparklers. 0.6mm might be causing too much froth. Go a bit wider if you've got them. Absolutely love the Pint365 system and can highly, highly recommend it. I use mine mainly on 10L & 20L beer in a bag.

[@tomk.williams1186]

Mr bean style review

[@123GEZZY]

Hi buddy... I've had my pint360 for two weeks and all I've had on it at the Moment is the same battels as your showing as they were on sale.. Now I didn't have none of your issues as before I used it I was in deep conversation with one of the pint360 guys and he uses the 5lt kegs with the engine to and he gave me instructions which worked perfectly... 1. Realese the air then let it sit for a few hours. 2. Slowly pull out the bung...... 3. Put tube slowly in down to bottom.... Job done.. No froth at all and points pulled flawlessly... I think the key part is letting it settle for few hours after releasing the pressure... I got another 4 kegs for me and the boys for this weekend..... Keep up the great vids

[@thebeardsman2031]

I've just put my own hand pull in our bar and have a couple of beautiful White Rat mini kegs from Ossett brewery, same beer which goes direct to the pubs. Not tried it yet but, I think you definitely need to let it sit for a while a good few hours, release the presume and carbon. Exactly same as tapping a real barrel, definitely take it easy on the 1st couple of pints and should be OK.

[@lukerichards6266]

Haha when it started going mad loved the reaction of must save beer!! Great stuff Simon 🤙🍺

[@BeerDogReviews]

Great video Simon, just shows the difference in taste between a proper hand pulled beer, and pouring it from the bottle. I've been toing and froing about whether to invest in a Pint365, and you might just have convinced me here!

[@leongruneberg4844]

I bought a pump for my "lockdown" home bar and this is really useful.

[@deanjones9341]

I want to support these micro breweries as they all do the 5 kegs. This hack will assist. Nice one 👍

[@samward3357]

Lost it when you started sipping off the side of the keg

[@benoakes01]

Will be because the top isnt airtight. Some tape will seal it

[@lukerobertson1718]

That is pony Si. Get a Lindr or Porta Pint. Can connect to anything and can dispense using inbuilt air compressor or beer gas. What you've poured isn't pub quality.

[@leew2199]

Fantastic the show must go on sometimes Simon you do the daftest things Simon can’t wait for tonight’s live feed 😁😁😁😁😁🍺🍺🍺🍺🍺👍

[@richies1308]

More hassle than they worth these mini kegs, tried a few now and not impressed. Personally, I’d rather buy some quality cans of craft beer from my local bottle shop or even Tesco’s

[@joebidensdentures4541]

Livestream TONIGHT (7pm UK time) at The Stoned Crow virtual pub! End of Summer Party! Please join us!

[@yoyoyotooo]

Can you set one of these up to the lindr pygmy through the 5 litre adaptor? I've heard you can

[@darrelw6246]

Maybe put the plastic tube through a cork mate mate keep everything tight just a suggestion

[@Simmo270]

You sound a little under the weather Simon. Hope all is well mate.

[@joebidensdentures4541]

It's a full Moon tonight, and he is a Werewolf, so.......

[@mikeconza1698]

He sounds more like a guy trying to say a nice word about his sponsor despite the fact that this turned out poorly . . . he’s trying to put lipstick on the pig for the sake of the sponsor . . . actually quite disappointing from Simon, who until now has been (thankfully) brutally honest.

[@reillypitts]

Really enjoying your vids mate, been binge watching for the last few days. Cheers mate, from aus 👌

[@doncorleone482]

More mini keg reviews please Si!!

[@Jay-uz4kv]

Loved when you sipped the foam off the top of the keg!

[@markveganism5003]

Where can u buy the mini kegs ?..and how many different beers can u get in mini kegs ?

[@johnm2871]

Is there a machine similar to your Philips that accepts these kegs...

[@pimpmysniper]

Might need to pull line out and pop it back in, may still be attached to the black plug

[@davidhatton729]

Might work better connecting to the keg tap and vent through the top!! Great idea though

[@jamesk1806]

I assume pint365 is a pure novelty item for all the bars built during lockdown? 😂

[@aroid_uk]

Simon can you please review tiny rebel tropica again? I'm convinced the recipe has changed and it tastes nothing like it used to

[@MrLeeBee]

No beer drinkers we harmed in the filming of this 🍻 Cheers!!!!

[@grahamjohn440]

Would this work on a 5 litre keg of larger

[@k2soljaz]

You can’t beat the blade machine for home draft beers 👌

[@paulsbeerreviews]

You’ve had better pours mate 😆

[@HayzeeHayes]

Maybe try connecting pipe to the tap somehow and force it open then pump away.

[@MerseyBeers]

He needed to have it place and let it stand to settle. Then release so air by turning it before pulling the bung out. Then duct tape round the top of the pipe to keep it in place....

[@HayzeeHayes]

@@MerseyBeers I understand that but it would be better if the pipe could connect to the tap as it's the outlet anyway and pump straight from the tap. I'd be looking at that myself in the future for my kegs.

[@MerseyBeers]

@@HayzeeHayes no because he is pulling it through with a cask handpull. The little tap is essentially a gravity pour the same as you would see at a cask beer festival

[@davidn8103]

😂 could of gone more Pete tong Simon slurping the lid

[@Checkyoursix77]

This is entertainment! Love this channel!❤️👍

[@tortozza]

Hobgoblin Gold, joke of a beer but at least you got it for the right price

[@jonathanniblock7799]

Simon releasing bangers today! Boom!

[@jamiecarruthers1028]

Is that a 3/8 beer line going in there?

[@jack7742]

Didn’t you absolutely tear into this beer a couple years ago?

[@realaleguide]

Yes but much improved from the keg.

[@dhillon621]

Wonder if you can get Spitfire in this keg?

[@andysinclair1161]

You can....

[@traviswilson7990]

That was funny 😂 Always putting across a positive attitude

[@RC-pz5jz]

Think there are better ways/hacks than this man, reminds me of my sub 😆 just too much head. Love the pint 365 though, keen to try this with bag I think

[@mikenicholson1001]

I had that exact same Keg. Same problem direct from the keg. Huge head every draw. It’s a pain in the arse.

[@stephenlonsdale5010]

Hi just subscribed to your channel, like the videos, could you please tell me if it’s ok to use the Milton sterilising fluid that stuff you use for cleaning baby’s bottles to clean the beer engine. and lines instead of using other chemicals, looking forward to your reply,cheers Steve 🍺👍.

[@Rockabilly999]

How many fingers for the head ?

[@SlurpyDave254]

At least you didn't use Doombar

[@stephenjebb5576]

Chill the mini keg first.....?

[@davidcharlton6785]

Can I have a flake in that beer 😆

[@louisbeerreviews8964]

No

[@Harbourmaster68]

Those kegs are OK, but they're flat by the next day and unless you've got a massive fridge, it's hard to chill them. Much better off with a PerfectDraft machine

[@eck2go]

T.I.T. comes to mind

[@willmartin4234]

Is this a how to, or how not to 🙈😂

[@damdog11]

This is a demonstration of how not to do it

[@brickclickcat2893]

Oh jesus...

[@TheSteveotron]

🙈

[@johnnoon9498]

A quick way to waste a lot of beer.

[@cobracraig666]

You might know your beers but you’re atrocious with the home beer machinery, especially considering you worked in a boozer

[@Verolader]

😂☮️❤️👍

[@paularrowsmith9376]

Farcical waste of time ,it would be funny if it wasn't so bleeding cringey, those kegs are shite ,this system is an absolute joke ,amaturish in the extreme