I have a masters degree in electronic engineering. Why is KZbin reccomending me this?!
@Dead-Master2 жыл бұрын
So you can learn more & more.
@jameshiraldo70072 жыл бұрын
Hahahahhahaa
@tanayrajware90232 жыл бұрын
sir then solve my problem please i have a gt ddr3 gt730 graphics card but after use dvi to vga adopter no display coming from this output ......please help
@astroplushproductions3 ай бұрын
@@tanayrajware9023bro is never answering
@Argyll9846 Жыл бұрын
If you have a monitor with a DVI Connector that you're using on a system, can you plug it into a display port using a display port to dvi cable connector? The question is, does the display port automatically show the display you normally get on your DVI socket? I have an older monitor that I want to temporarily use on a new system using display port, but have never used display ports before. Thank you for your help.
@therightsphoenix1111 Жыл бұрын
I have a question. I have a dell E6410 and my display port is reversed. That like decline narrow part is on the left side yours appears to be on the right, how do you get a display cable that fits your particular port? I find that weird actually, two different display ports. Thank you for your time....
@thatkiraiguy2169 Жыл бұрын
Does display port connect from the desktop tower to the monitor? Like an HDMI could? Or would you have to connect the display port from iPad/laptop/tv to the monitor only?
@GMODISM Жыл бұрын
Yes, and DisplayPort has better framerates and speed too usually
@thatkiraiguy2169 Жыл бұрын
@@GMODISM Sounds good! Thank you! I was limited to a 21.5 inch stock dell monitor with 75 hz (my desk is also small so I couldn’t get a bigger monitor until I’m able to purchase a replacement). But thank you, now I’m heavily considering a massive upgrade frame rate and resolution wise
@msandah5753 Жыл бұрын
Hi bro, i wish you can see my comment, when i connect my VGA to my onboard Graphics it does sisplay on screen but when i change the VGA to my Physical GPU it says "no signal check cable" can you please help me
@GMODISM Жыл бұрын
Update drivers, more similar tips is i my hdmi tutorial also
@nikolai4380 Жыл бұрын
can i just use display port and not others? eill it work?
@GMODISM Жыл бұрын
Should work, display port is the best
@Jcg2nd9 ай бұрын
I hooked up the DVI port, the HDMI for ProTools and it is not letting me share both screens. How do I do that or are you knowledgeable in that?
@GMODISM9 ай бұрын
While I haven't used pro tools I can say that sometimes it is important to know the difference between DVI digital vs analouge vs mixed signal connection to make your screen work and make it work with protools, so check the monitor and protool compatability and see which connection it is.
@Ari-lp5bu2 жыл бұрын
I want look at 3 screen monitor you use
@gabrielbrenes3205 Жыл бұрын
I have a question do I have to conect evry one of them like a hdmi a DVI and a display port to work because I only ave connecteda hdmi to my graphics card but when I turn on the pc it doesnt show anything in the monitor, by this i mean that the screen stays off it does not show the screen of my pc, so do I have to connect a dvi or whta, cause only hdmi dont work help me with this pelase.
@mhasan4303 Жыл бұрын
did u solve ur prooblem?
@UnwrappingByMimiKoteng Жыл бұрын
Hi. My desktops computer is using vga and dvi cable. It is unable to connect to 27 inch hdmi monitor. I have two hdmi monitors. What can you recommend so it will work?
@GMODISM Жыл бұрын
It should have more connections than only hdmi, see what options you have. Adapters exist otherwise but they are not cheap.
@itsReallyLou Жыл бұрын
You have a very nice way of explaining things. Thanks!