A short demonstration from Spear & Jackson on getting a watertight connection between your outdoor tap and garden hose
Пікірлер: 14
@jarkins35353 жыл бұрын
Thanks for this, super handy as an overview. It did mislead me quite a bit though, because the way the thread is measured in the video is not quite right. Turns out all products state the BSP sizing, not the actual diameter size. So the 3/4" BSP is not the same as 3/4* diameter across, the video makes it sound as if those are the same. To fit the 3/4" BSP connector his tap in fact needs to measure 1" across. I spent quite a bit of time looking for connector which is 1" and couldn't find any, till I came across the clarification on waterirrigation website. There are conversions tables from actual to BSP sizing, worth checking over if you are unsure. Hope this would help someone else to save a bit of time :)
@gbwhitewarrior9 сағат бұрын
Really bad video I couldn’t tell what you were doing in your off camera could try
@jimdomina3267
Wrong wrapping of the PTFE. always wrap in the same direction as the threads. ie: rightie tightie. you don't want the tape to try and unwind as you tighten the fitting . I've also always used a rule of 3. ie: 3 wraps. if you do 21 you risk splitting your fitting before you can even tighten it. Not sure why i even watched this but boredom will drive you to do strange things :).
@mattr9089 Жыл бұрын
You have applied the PTFE tape in the wrong direction, when you screwed back on your fitting it will have just unwound the tape l. Your tap fitting is a right handed thread so you need to wrap it clockwise.
@AlySadek1945 Жыл бұрын
I fixed the braa 2 pieces but no water passed to the hose
@thewalnutwoodworker61362 жыл бұрын
What happened to your qualtiy?
@annnolan6962
Excellent. Thank you ❤
@user-et6qg9mt1j Жыл бұрын
Do you also have a purchase for China?
@ianpearson89762 жыл бұрын
great video and a great idea all round.except you measure the thread in cm then refer to a table to get the bsp measurement from that.
@mr.mrs.d.70152 жыл бұрын
Very helpful. Thank you
@tripathiamit2000 Жыл бұрын
PTFE good.
@calmcalm62032 жыл бұрын
Why is the devil making us go thru all these complicated stuff. We shouldn't be doing all this crap