How to connect a Mixing Console to a Power Amplifier

[@ajayioluwadamilare4509]

I'm really enjoying your tutorial, but I need tutorial on external equalizer graphics sir

[@KelvinEriaganoma]

Thanks. I’ll try to work on that

[@AnilKumar-zo2eu]

Thank you so much sir for your packaged information

[@keverlyhenry1450]

Sir, as a beginner, I am not understaning what you connecting.. You need to give details, step by step for connections... Thank you

[@cristianrodriguez2929]

Can I connect powered mixer with power amplifier?

[@KelvinEriaganoma]

Yes, you can. But you have to connect from the mixer output to the external amplifier and not from the internal amplifier output.

[@chriskatibathesinger1546]

Sir where do you connect the bass guitar 🎸is it on the mic line or line for intruments line on the console i need help because u dont have DI box,also the keyboard guitars do i connect them on the line of the mic or line out or line of intruments on the console

[@KelvinEriaganoma]

Connecting a bass guitar directly to the mic or line input of a mixing console without the use of a DI box is not advisable, because of impedance mismatch. Try any one of these methods instead; 1. If your mixer has a high impedance (Hi-Z) input, use it for the connection. 2. Use the direct-out built into the bass guitar amp/combo (that's if it's available), and connect it to a mic input on the mixing console. 3. Mic up the bass guitar combo/cabinet. Place a microphone with good low frequency response in front of the cabinet about 2 inches from the front, and a little away from the center. A keyboard is a line-level instrument. So you are better off connecting it to the line input of your console. Thank you for reaching out.

[@chriskatibathesinger1546]

@@KelvinEriaganoma at our church we haven't bought the bass combo so i normally connect the bass guitar on the line of a mic on console than bass man on stage uses the monitors and also i want to know where i can connect the lead guitar the kick on the console.

[@chriskatibathesinger1546]

All am looking for is the best sound in our church ⛪🙌 nowander am asking alot of questions sir am learning alot from you

[@chriskatibathesinger1546]

@@KelvinEriaganoma ok what about the lead guitar 🎸where do i connect it,is it in the line out or where the microphone line or line in on the console

[@KelvinEriaganoma]

Please, message me on Facebook messenger or send me a DM on Instagram, and let’s discuss your setup. Check the “about” session of my channel for links

[@vijumat4133]

Need this amplifier

[@AdebayoEmmanuel-pm1oi]

We lost the cable connecting from the power console to the mixer of 32 channels it has six pin from both the power console to the mixer.

[@clementjoseph3655]

Pls can run a video on the connection of a mixer console to graphic Eq to xover and finally to power amplifier

[@KelvinEriaganoma]

I’ll work on that.

[@StanleyNjoori]

I have new machine but I don't know to connect

[@chriskatibathesinger1546]

Your answer will be appreciated thx

[@vivekjoy9485]

Can you please reply me back? I have this situation. I have a powered mixture (2x250,4 ohm) and an analogue mixture (signature 16) . I dont have a budget to buy an amplifier. I connected the analogue mixture output to powered mixture using line out to power my passive speakers (elx115). Will it ruin the speakers? should i buy a power amplifier?

[@capacitacionatcenlinea2.104]

Thanks, U R good!

[@ukeaguvictor9]

Good day Mr Kelvin, I bought this exact Mixer console and your video have been have helpful. Currently my challenge is how to connect the bass, kick and the floor tom as inputs, and their output connections. Thanks

[@witty188]

Thank you, can you please make a video on connecting a cross-over

[@KelvinEriaganoma]

I'll add it to the list

[@samuelogbu6422]

Good morning sir sorry can you do a video in how to separate your FOH from your stage monitor and sub with a crossover tank u

[@jeremywestcott4689]

This was very helpful, especially the diagram.

[@johnotieno-cd6yo]

well done 👍, but you as a sound ingineer expert I need you some help from you

[@FallahAbdul]

Thnx very much Mr kelvin for educate us

[@tupirunodgbegerist86]

I hear you Sir Sound engineers gather here

[@KelvinEriaganoma]

😁

[@steevyheart6182]

The oracle of sound thanks for this especially the stereo, parallel and bridge mood explanation

[@KelvinEriaganoma]

You’re welcome sir

[@teganoble]

@@KelvinEriaganoma The Oracle Sir

[@KelvinEriaganoma]

@@teganoble 😁

[@justinabaraofficial9553]

The short tutorial was great. Thank you.

[@KelvinEriaganoma]

Thanks boss

[@kingsleyonaiwu2611]

Am interested on this

[@Nomatter-g1z]

Thank you

[@olaoluwaoluwatosin3092]

Well done

[@josephotabong99]

Great 👍

[@dannzau1316]

Hey

[@Deborah376]

You rush your words very difficult to hear