how to connect a remote control to a winch or a crane

[@samanbakhtiary4686]

thanks for sharing your experience. the video is very informative.

[@ardyking7194]

Good Job 👍 ❤️

[@MrAdelali111]

Great job good luck👍

[@yeagnes8797]

Hi, this is Agnes from LCC remote conttols, if you have any demand in industrial remote control, pls feel free to contact me.

[@HENJEL-z7j]

❤❤❤

[@ابومحمدمهدي-ز5ض]

ممتاز ياحجي مجيد ،بالتوفيق

[@Straight-Outta-Roanoke-AL]

Im trying to wire all 3 hoist up to this same exact remote system. How many solenoids do i need to order and do you have a part number from online??? Please help lol. I would really appreciate it!!!!

[@killert003]

If you use start run capacitor on motor contactors are not needed. did this method and tested by me. also down safety switch will have to be across brown wire.

[@Straight-Outta-Roanoke-AL]

Hmm. So this exact remote system can be 12v or 24v. There is supposed to be a switch inside of the receiver box to select either one. So I purchased a 12 volt DC supply power box to operate the receiver. My winches are all 110v AC. Do I just wire this to the winches or is this the wrong output voltage to operate these winches.

[@jaimedulos8107]

how many meters can reach by these remote control

[@mardakworkshop4450]

Didn’t count but more than 30

[@leonandi4cu]

Hello, could you help me. Exactly the same device. The problem lies in the remote (or this is my assumption) As soon as I insert the batteries, the indicator quickly flashes red. I checked everything written in the instructions. There are no sticking in the buttons, and the emergency button does not remain pressed at least a schematic diagram of the internal electronics of the device, please!

[@doal9525]

Pleas how can i find stop switching in amazone?

[@mardakworkshop4450]

RADWELL VERIFIED SUBSTITUTE XCKP2118N12-SUB Substitute for Schneider Electric XCKP2118N12, 1/2NPT, Fixed Rotary Lever, Limit Switch, SNAP Action, 1NO/1NC a.co/d/4FgeJYF

[@chektay888]

Mardak, could you please explain the purpose of the main and com wires coming out from the receiver? Thank you, Chek

[@yeagnes8797]

Hi, this is Agnes from LCC remote conttols, if you have any demand in industrial remote control, pls feel free to contact me.

[@mythic9909]

Hi. I pay like this remote control. But it not work. Do I need to add a condoctor?

[@mardakworkshop4450]

Hi thanks for your comment I am not an electrician but this is the only solution I find for this type of remote control

[@yeagnes8797]

Hi, this is Agnes from LCC remote conttols, if you have any demand in industrial remote control, pls feel free to contact me.

[@TheYan87]

@@yeagnes8797 how to change from on/off button to toggle button.

[@فيالورشة-ط1ي]

من أين نحصل على الريموت حجي وكم السعر من فضلك

[@mardakworkshop4450]

في محل في سلماباد سعره تقريبا ٣٥ دينار

[@pomoc_drogowa]

Hi. Can you help me with instalation 24v ? Wiring diagram ?

[@Nomiindustrialremotecontrol]

We can help you sir

[@hussainrafeei6119]

عمل ممتاز

[@lou2070]

You need to change lever switch instead a normal limit switch.