Make An Electric Lifter - Forklift With Height Up To 4 Yards | 2 Functions In 1 Forklift

[@ngenes1]

This makes most diy people so pleased to see your work. This is the most universal way for anyone to follow your instructions . Thank you

[@KwandoTechnic]

Thanks!

[@SunilKumar6614M]

Your no pl I would like to made it for my wksp

[@toolzshed]

Whoa that would be cool to lift AC units 🤘🏽🔥😀 awesome build project!

[@ahmtugurlu]

I am a mechanical engineer for 28 years. I applaud you for doing this project. 👋👋👋

[@KwandoTechnic]

Thank you!

[@thedolphin5428]

Forklift Rule #1, always travel with any lifted load as LOW as possible. You were unnecessarily high when pushing the box around. And, with your little wheels, it never hurts to put a strap around your load in case the wheels hit a floor obstacle and the load jerks to a stop and the load lurches forwards. Otherwise great job!

[@petermapp5988]

These are the tools that promote self sufficiency in your home.This is great for cleaning guttering,painting etc.You are gifted

[@KwandoTechnic]

You are right. Otherwise you can bring big things to second floor.

[@yeecoproducts9622]

Can I have your email id

[@KwandoTechnic]

@@yeecoproducts9622 please put your email at here. I will send email to you.

[@yeecoproducts9622]

[e-mail]

[@МурадФайзиев-ь1ц]

Лайк поставил с удовольствием и конечно же подписался, работа классная, смотреть тоже было приятно, нет лишней музыки и танцев с танцором❗🙏👏💪💪💪

[@АнтонКлавкин]

Всем респект. Этот видос для тех кто сообразит. Все чётко. Автор профиссионал. Крассава. Кто не понял что чертежей не будет-их не будет. Разбираемся сами. Я все понял. Идея понятна. Все получится.

[@KwandoTechnic]

Thank you so much!

[@jorgeflorencioparrafaundez340]

SALUDOS desde Chile , KWANDO como siempre un excelente aporte para los que para los que saben y para los que solo critican sin aporte verdadero, trataremos de implementarlo para el uso de la casa

[@KwandoTechnic]

Thank you so much!

[@patty12762011]

is the best idea with metal was i see in youtube,from germany

[@KwandoTechnic]

Thank you so much!

[@Simphome]

very cool, you can make it very precise. Your skill is already an expert. wow!

[@KwandoTechnic]

Thank you so much!

[@shibeshi2637]

The Martian - everything you make is beautiful and workable.

[@KwandoTechnic]

Thank you so much!

[@ianvicedomini2648]

Perfect. I imagine all the welding is tidied up off camera so you can carry on with the project. This one is brilliant.

[@Equilibrier]

You used pulleys, good ;). But the multi-usage of this tool is way too awesome... Thanks for the idea and working process, you're just great !

[@electrichoist]

This operation is fine, we manufacturers also admire.

[@KwandoTechnic]

Thank you so much!

[@alilourbh7284]

عمل رائع عبقري ... تحية حارة مرفوعة لك من الجزائر .

[@KwandoTechnic]

Thank you so much!

[@krishnakumarguruagencies4498]

dear nemo, there is nothing to laugh on this . knowledge should be shared, i am not a professional seller of ideas, i am interested in all type of good junkyard inventions, mr kawando is helping lot of persons who are unable to study of theri own. please no more discourage here after.

[@KwandoTechnic]

Many thanks for your positive opinions!

[@specsarena1124]

Cable snaps you are in free fall but that is a simple add! This is really fantastic!

[@KwandoTechnic]

Thank you!

[@zacksmith7025]

very cool... I like it..this can be used as elevator inside a house too - now, just build the walls around it, frame it and drywall it.. bam!!

[@KwandoTechnic]

Many be, but you have to have many switches.

[@josehuamanigutierrez6398]

@@KwandoTechnic 2

[@josepaulodesouza8917]

Mpint bom ok

[@joannashiu]

Nice video, I am interested ...... wonder you can list all the name of the materials and where to purchase them?

[@СергейПальчик-е5ф]

Супер 👍👍👍👍 исполнение !!!! И видос запилен четко 👌 без всяких бла бла бла

[@KwandoTechnic]

Thank you!

[@kvariumist]

А ты на высоте, и в это время сел аккумулятор:) Супер работа, монтаж на высоте, идея класс!!!

[@KwandoTechnic]

Thank you so much!

[@KwandoTechnic]

@Christian Justus ads or tip?

[@peace_door_ball_]

На платформу ручная лебедка+ шуруповерт

[@hagamenoncarmo4105]

Very good, I'm from Brazil, I recently did a very similar lift with this one for a client who needs to lift ultrasound machines weighing approximately 150kg for loading and unloading, it is working very well, I already have an order to make another elevator with the purpose of lifting workers for small repairs to light bulbs and things like that on the ceiling of a store. hugs

[@olegpoheretski190]

А на какую максимальную высоту можно поднять рабочего?

[@jamescook1364]

Wow wish I could hangout at your house. Well done. Stay safe in these uncertain times Canada

[@KwandoTechnic]

Thank you so much!!!

[@hartotoindraz1262]

@@KwandoTechnic jjj

[@Qspecialman]

That, is a very impressive piece of kit, well done you.

[@ohmygod567890]

The video is very interesting and useful for daily work, I also want to make this one like you but some dimensions I can't see in this video, hope you can share so more people can do it like you, thank you so much!!

[@orbitexomega2332]

For me you are the best wilder on KZbin great 👍👌job 👏

[@KwandoTechnic]

Many thanks for your compliment!

[@AlphaTroniks]

Now a giraffe has to look up to you 😂! Well done! Nice build!!

[@KwandoTechnic]

Haha. Thank you!

[@zekkoursalim5343]

أحسنت ، الواحد يتمتع بمشاهدة فيديواتك، أنت فنان وموهوب .

[@KwandoTechnic]

Thank you so much!

[@georgekrivosic5094]

Great Job, the concrete counterweights looked unstable you could do with a safer system where they interlock and possibly a safety limit switch in case you go too high or your up button gets stuck. Well done. .

[@KwandoTechnic]

Many thanks for your advise!

[@luizcarlosperlin4942]

@@KwandoTechnic 3

[@juliaguizado9464]

Buenos días quería decirme las medidad

[@seymourscagnetti1413]

Dear Mr. La'Quanda, This machine is very great!

[@KwandoTechnic]

Thanks!

[@astonanunciacaodecastro408]

Parabéns pela execução da empilhadeira, show de bola "estupendo" amei, quero tentar executar seu projeto, Deus te abençoe sempre com suas ideias fantásticas!!!

[@ang8282]

An excellent design. Should be very useful in small workshops and residences

[@phatjoe1256]

Excellent job , do you have the part list of materials and their specifications

[@EngineerDeelipKadpatil]

Extremely Beautiful fantastic Ideas and Very Nice Presentation with Excellent quality of performance of Fabrication Method to build material handling equipment. Thank you so much 💐💐✍️👌👌👍👍🙏🙏

[@KwandoTechnic]

many thanks for your compliments!

[@jurandirneves4803]

So faltou a trava de segurança

[@patrickgunn312]

Very nice project! My concern is the small diameter pulleys with the large diameter cable. I have a similar setup and found It was necessary to use 80mm to 100mm pulleys to prevent damage to the cable.

[@Dnasty1]

This is really cool I love watching people build stuff.

[@gilesalmeida804]

I am there….as it has already been said “take my money”, very great project

[@KwandoTechnic]

Thank you so much!

[@Martin1519]

This build is genius!

[@KwandoTechnic]

Thanks!

[@АндрейЖданов-в8ъ]

Отличная идея, есть чему поучиться, спасибо!

[@KwandoTechnic]

You’re welcome!

[@miker252]

A great demonstration of fabrication skills. It's similar to the Genie lifts we used in our HVAC shop. For safety, I would suggest outriggers on the sides and encased within the base frame extending both to the front and rear. These would negate the need for the added weights.

[@ma-lakshmifabricator7549]

Overall, this is a highly informative and enjoyable video for anyone interested in fabrication. It showcases your talent and expertise while providing valuable insights and inspiration to fellow enthusiasts. Keep up the great work, and I look forward to watching more of your content in the future 👍👍👍

[@rodolfomarrufo1185]

Is this beautifull? I think it is, soo beautifull, amazing, kiss me... Forget the last part ... Or dont... Forgetit... Great job!!!

[@KwandoTechnic]

Thank you so much!

[@MurrayTymms]

That is awesome! What an inspiration, great job mate!

[@KwandoTechnic]

Thank you so much!

[@chandrappad3341]

Good work poor people can utilize namaste

[@chandrappad3341]

Useful for Seniors thanks

[@bmarvin6339]

Nice simple design, but only for cargo lifting. For human lift, it must have automatic mechanical braking of the lifting cart in the event the hoist fails, cable breaks, cable hardware comes loose, cable pulleys break, any welds holding the cable system breaks. This is usually done by weighted (or spring loaded, but weighted is best) pivot arms with brake shoes on the outer end of each arm riding in the U-channel. The other end of each pivot arm is the attachment point for the lifting force (the cable bitter end). Weight is added to this end of the pivot arms such that if the regular, normal lifting force suddenly goes away. The weights on the pivot arms jam the brake pads outward into the U-channel and arrest the fall of the forks or carriage platform. Under normal lifting force of the cable, the pivot arms cause the brake pads to be retracted from the outer wall of the U-channel and the lift works normally. This is the braking system for elevators that was invented by Elisha Otis that finally made elevators safe. You really need a braking system. There are many techniques. Even a cargo lift needs a braking system to prevent someone or something under the lift from being killed or causing damages. Failures will eventually happen. Be prepared with safety systems.

[@ggmtddbo]

GREAT ADVISE!

[@kilderebezerra3822]

Projeto incrível, muito lindo e vc merece tudo de bom , tem gente que nem faz e nem deixa os outros mostrar como faz " isso chamamos de inveja e você é um excelente profissional parabéns. Agora vou seguir todos os seus projetos que são incríveis adorei

[@KwandoTechnic]

Thank you so much, sir!

[@alexandresouza7839]

Subistituir o cabo de aço por corrente de moto ( cabo de aço e roldana pequena nao combina) depois q fis esta subistituiçao na minha cabeça fria

[@roymoran7679]

Me gusta y nesecito este aparato, podrias vender ? En que pais te encuentras?

[@eduardorocha8539]

Oi boa noite

[@anilgarde137]

An excellent design. Should be very useful in small workshops and residences to reach lofts/ upper floors/ Roofs.- Anil from India.

[@longkhanhpham4440]

Bearing: 6307 U Beam: 92x50x50x5 Square: 50x50x3

[@Palalau100]

Hi. These measures were given by the Kwando Technic ?

[@longkhanhpham4440]

@@Palalau100 I got it base on this video. I can share the drawings if you need. I already fabricated and it Ok

[@pako_tube6898]

@@longkhanhpham4440 share the drawing please

[@MrMaterpc]

@@longkhanhpham4440 Good night, could you please share the drawings with me?. How can I contact you? Thanks in advance.

[@MrMaterpc]

Thank you sir!

[@tagoresarisa5645]

Wow..excellent work done..you are a hardworker

[@KwandoTechnic]

Thank you!

[@alexanderramirez9234]

Viendo el video pude realizar los planos. Muy buen aporte

[@KwandoTechnic]

Thank you so much!

[@ridhadababi5858]

. Super vidéo de construction - Merci d'avoir posté

[@KwandoTechnic]

Je vous en prie!

[@alonsobrosmann4300]

Manufactured lifting system is nice, but it lacks one or two. The bearing on the lifting section and the rollers over which the rope passes should be lubricated with grease. The concrete weights placed on the back should be fixed with screws instead. Thus, the system can work healthier and safer.

[@KwandoTechnic]

Many thanks for your advise!

[@2L40K]

The worst is not that the rollers are missing lubrication, but that they have too small diameter for that thick rope. Look at 17:47 and see how it does not want to bend naturally. Steel ropes have a minimal bending radius depending on their cross section. Bending a thick steel rope over a small radius will damage it quickly. Than it will fail catastrophically... That's why commercial lifts of this type use chains instead of steel rope.

[@massimopavera8941]

It lacks a lot of safety measures! !!

[@juancarlosabad3298]

​@@massimopavera8941 yes, i agree; great job as first working prototype , but lacks on safety ....other than the mechanical ones already pointed out , i would add limit switches that prevent the motor to run when reaching lowest and/or highest position...

[@hieudinh1594]

@@KwandoTechnic can you make one for me

[@nagarajshet1451]

Great job brother

[@KwandoTechnic]

Thanks!

[@freejoleando7934]

Hola ,me encanto. Donde conseguiste el motor, si me pudieras dar mas detallas te lo agradeceria mucho por favor

[@KwandoTechnic]

I buy it on Amazon.

[@masrukhanrukhan9669]

Peralatan yang sangat canggih terus berkarya bro..

[@KwandoTechnic]

Thank you!

[@suule3429]

1 nguoi tho rat gioi va co tam da huong dan rat cu the . xin cam on nhieu

[@Gollywog]

you need an eyelet where the cable loops at the end. It's going to bend and weaken over time.

[@KwandoTechnic]

many thanks for your opinions!

[@michaelbabatunde3915]

This is an excellent execution. Very out standing

[@KwandoTechnic]

Thank you!

[@williamlow9961]

Good idea 👍👍👍

[@KwandoTechnic]

Thank you!

[@TrackYt]

What hp motor is used there ​@@KwandoTechnic

[@raghupathyvp7105]

WOW exelente job a single man with out any helper.made.~~~good skill. very nice ,Thank you sir .👌👍😊💐

[@KwandoTechnic]

You are welcome! Keep support me!

[@BuildingFromScratch]

This is great. Do you have plans for this I could get? I want to build it with one addition. I want to have stabilizer arms with 2 linear actuators on each arm. One would extend the arms and the other to lower them.

[@indonesia_otomotif]

Keren abis cara pengelasannya bikin tambah ilmu

[@KwandoTechnic]

Thank you!

[@ryanlarson5927]

Hello, great build. I just built one of these lifts similar to yours and was wondering what inverter that you used to power the hoist from 12vdc source.

[@hagamenoncarmo4105]

Olá, eu traduzi seu texto, tenho uma reposta para sua dúvida, para isso traduza também o meu texto caso esteja interessado, afinal eu contruir um guindaste muito parecido e está em pleno funcionamento,,, bem, sobre sua dúvida é simples, basta você dimenssionar o inverssor baseado na potência da sua talha, ou seja, se sua talha tem a potência de 500W basta adquirir um Inversor que forneça essa potencia de 500W versus 12Vdc, espero ter ajudado, Eh Isso !!!

[@HiTechDiver]

Nice project, and so useful. I might have to play copy-cat on this one.

[@KwandoTechnic]

Thanks!

[@edisonleite6040]

Muito bom gostei ficou ótimo parabéns

[@KwandoTechnic]

Thank you so much!

[@LS-fi3py]

Super věc, jste jednička!

[@KwandoTechnic]

Thank you so much!

[@jhonvervisaya8619]

Hi, planning to do the same. Can we ask for the specs of the motor you used as well as other parts. Also, can you please share the measures of the metal bars

[@dalexro67]

O idee excelentă,cu o realizare profesională! Felicitări ! Salutări din Transilvania !👍👏👍

[@KwandoTechnic]

Thank you and welcome!

[@envitech02]

Also, the handrail height for the manlift is too low. It should be at least 1.1m. 1.2m is best. I like how the manlift basket is hooked and secured onto the fence. That's a really great idea.

[@KwandoTechnic]

Thank you so much!

[@ahmedamine8640]

7

[@acl4734]

Really brilliant. You are a genius. Is amazing see your videos. Thanks a lot for sharing. 👍😉

[@KwandoTechnic]

Thank you so much!

[@TrackYt]

@@KwandoTechnic what hp motor used here

[@dhirenlande4234]

Great job man! You made it look all so easy!

[@KwandoTechnic]

Many thanks for your support!

[@selwynherbert8427]

How much weight can it lift

[@KwandoTechnic]

@@selwynherbert8427 up to 200 kgs.

[@ПавелУральский-ч3с]

Зачётный аппарат! Ещё бы добавить опоры выдвижные, с боков, для работы на высоте. 👍👍👍

[@zolatanaffa87]

Отличный проект, но для повышения безопасности я предлагаю вам добавить к конструкции распорки (два кольца в верхней части красной рамки, к которым вы можете привязать веревки, удерживаемые другими операторами или прикрепленные к земле с помощью колышков) и увеличить высоту клетки. как минимум выше бедер (профессиональные продукты достигают и живота)

[@KwandoTechnic]

Many thanks for your useful advises!

[@alexandergrigoriev8503]

..и ролики покрепче, и вообще распорок побольше, а то с моим "русским" весом все конструкции кажутся слабоватыми 😉😀🌞🌞

[@pipespb]

@@KwandoTechnic Трос через ролик должен быть вокруг балки, а не под нею. Безопасность опять же...

[@MrChDennys]

@@alexandergrigoriev8503 не покрепче, а с большим радиусом: эти расхреначат трос очень быстро

[@kostten]

Охуеть, какой отличный. От других (сарказм). Чиноамериканец за месяц ебли и штуку баксов соорудил електророхлю на проводах, которая опрокинется с весом в 200 кг. 250 полуляхов из 150-ти. 😂😂

[@traxxgoingwild]

Looks practical. Well done dude.

[@danilo245310]

HOLA MUY BUENO FELICITACIONES. PUEDES COMPARTIR LOS PLANOS Y DETALLES DE LOS COMPONENTES? SALUDOS

[@KwandoTechnic]

Please see it detail in video help me. Thank you so much!

[@leonjuancarrilloramos9879]

@@KwandoTechnic , , .

[@veraberrios]

Excelente trabajo. Saludos desde Chile.

[@KwandoTechnic]

Thank you and welcome!

[@first-inno]

What kind of motor? What are its specifications Your design is good, but did you add a safety lock in case

[@KwandoTechnic]

Capacity: 1500W, 230V/50HZ, Max weight: 400 kg. Speed: 10m.min

[@peppeDi]

Ciao! Sei davvero bravo, copierò il tuo progetto che userò come ascensore per la sedia a rotelle e potrò recarmi comodamente nella stanza al piano di sotto. Sei davvero molto BRAVO. Ciao dal Italia

[@KwandoTechnic]

OK, let do it!

[@jamesstoffel6835]

Do you have plans for the parts used to make this? Great build video - Thank you for posting!

[@KwandoTechnic]

Please see detail in video help me! Thank you so much!

[@Kindey-Ng]

What's brandname, type and models of the welder gun pls?

[@Zhandarbek-e5y]

ШЕБЕРЛІК ӨТЕ ЖАҚСЫ 👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍👍

[@scroungasworkshop4663]

Excellent build. May I ask what it cost to make as you used all new materials so it’s wouldn’t have been cheap. Do you still use the smaller forklift you made! Cheers Stuart 🇦🇺

[@KwandoTechnic]

Cost for this lifter is 300 US$. Now I’m still using small forklift.

[@aleksandrasvaivada3983]

Thank you for the detailed video

[@KwandoTechnic]

Yes, bro.

[@paulawillaminachandler-ren3725]

That's another fantastic build, and very useful too.

[@KwandoTechnic]

Thank you so much!

[@intoxyc8me]

Needs to add motorize wheels to move it around while it is lifted in up position may help.

[@intoxyc8me]

Don't forget fall protection too.

[@delfinorodriguez1576]

Está muy bueno ese trabajó felicidades al ingenio humano que facilita el trabajo.

[@KwandoTechnic]

Thank you so much!

[@iorekab3611]

This is wonderful ! Anything you would change now that you've been using it for a while ? Also, how much counterweight did you add ?

[@Usefulcraftchannel]

you are very smart and creative.

[@KwandoTechnic]

Thanks!

[@gelsonrocha412]

Muito bom você e fera .

[@KwandoTechnic]

Thanks!

[@sharmaanupoju5322]

Wow super skill_ super tools 👍👍

[@KwandoTechnic]

Thank you!

[@giovannipontarolo4098]

Parabéns! Projeto e execução maravilhosas...👏👏👏👏👏

[@KwandoTechnic]

Thank you so much!

[@ruggierofenuta2796]

Utu

[@ruggierofenuta2796]

Ultimo senso cua

[@БЕНБИН-е2г]

@@KwandoTechnic oops

[@globalpc6653]

you are a genius well done

[@KwandoTechnic]

Thank you so much!

[@globalpc6653]

Really I mean it ...

[@jash630]

It's funny when he pats the box down like he's actually going to try to lift it...lol

[@KwandoTechnic]

Thank you!

[@titoucosm]

excellent travail bravo

[@KwandoTechnic]

Thanks!

[@fixatape]

Good job. I'm from Brazil, and I really enjoyed your work. I would like to make equipment like this. you would have more details, such as measurements, I couldn't understand in the video. Thank you very much.

[@KwandoTechnic]

Sorry. I showed all measurements in video. Please see detail in video help me. Thank you so much!

[@sanyasidash4925]

Nice

[@naifalbaidhani1829]

@@KwandoTechnic thickness is not shown

[@xuanvantrinh4932]

Anh bạn này ở đâu vậy bạn rất tuyệt Thank you ❤️❤️❤️❤️👍👍👍👍💐💐💐💐

[@KwandoTechnic]

Thanks!

[@kleberpitangui9737]

PARABENS PELO PROJETO MUITO BOM EXCELENTE

[@KwandoTechnic]

Thank you so much!

[@Bid146]

@@KwandoTechnic bisa di pesan?

[@elainesilva7097]

Parabêns !!! Excelente !!! Agradeço por compartilhar seu projeto, conhecimento e criatividade e dedicação.

[@KwandoTechnic]

Thank you so much!

[@ivoaugustocorreacapella2640]

Fantástico! Muito bom!

[@KwandoTechnic]

Thanks!

[@rlm98253]

Excellent design and fabrication.

[@KwandoTechnic]

Many thanks!

[@odairfernandes1912]

Hi Kwando. Congratulations. I wish I had all those skills. What kind of welding machine you use? Is it a TIG? Could you tell the brand and the model of this machine? Thanks.

[@KwandoTechnic]

I use TIG welder. You can refer this one: bit.ly/3zRuNUY

[@KassinoGarciaMartinez.-nk7vl]

Exelente Diseños maestro guauu

[@KwandoTechnic]

Thanks!

[@joserobertodasilvacarvalho2418]

Fantástico. Muito bom. Parabéns.

[@KwandoTechnic]

Thank you so much!

[@박포토-j2s]

good

[@public-department-of-science]

That's amazing! I'm impressed by the projects you are doing to do something for my personal needs.

[@leandroaraujo6538]

What's the load capacity of this forklift?

[@edeilsomsousa1352]

Incrivel maravilhoso trabalho

[@KwandoTechnic]

Thank you so much!