How to Connect an Edirol PCR M30/M50/M80 Midi Controller to Mac and Windows. (no drivers required)

Connect your Midi Controller to Mac and Windows without having to download drivers.
(Paste the link for step by step instruction)
support.roland.com/hc/en-us/a...

[@niknovo]

Worked perfectly for my PCR-M30 with MacOS - thanks a lot!

[@AntonioGrazioli]

thanks a lot worked on an old PCR-M80 on an old macbook with high sierra

[@S1D2B3Peep]

Worked for MAC for my Edirol PCR-1 controller. MANY THANKS! 🎉

[@KoD83]

THANKS! Managed to get an old Edirol PCR-80 working on Windows 11 thanks to this!

[@paveltim5274]

everything is working, !!! Super!!

[@cottamusic]

YOU ARE A BOSS!!!!!!!!! ALSO WORKS FOR MAC, THANK YOUUU

[@divoljud]

BRAVO!! THNX!

[@Luciulon]

Genius!

[@krolkoolmarek7074]

Is it works with my Edirol PCR-M1 ? Thank you ❤

[@thomasgt1672]

@User Thanks for the tips, does it work the same for PCR 300/500 etc.. ?

[@IVSpolly]

Hi. Hope this helps. rolandus.zendesk.com/hc/en-us/articles/115000157403-PCR-300-PCR-500-PCR-800-Connecting-to-a-Computer

[@thomasgt1672]

@@IVSpolly Nothing works with windows 11 for the moment but thanks for the help.

[@hakim.instru4782]

Please answer my question. Is it useful to use a cable such as the printer cable? I hope you answer my question, thank you

[@IVSpolly]

Hi. You will need to use a compatible cable with your midi controller to connect to your PC. This is to 'power on' the controller and communicate with the PC. I'm not sure that a printer cable is compatible. You can easily source a compatible cable on ebay at a reasonable price. Maybe this link will help. www.ebay.co.uk/itm/173872407302?mkcid=16&mkevt=1&mkrid=711-127632-2357-0&ssspo=0A72-0rARK-&sssrc=2349624&ssuid=aWliABVFTN6&var=&widget_ver=artemis&media=COPY

[@krolkoolmarek7074]

​@@IVSpollyhello is it works on Edirol PCR-M1 pls ?

[@flezo00]

Do you know if there's a way to do that for Mac?

[@IVSpolly]

Hi. Read the instructions on this page for mac procedures. I find sometimes that even though the DAW has recognised the controller the settings in the DAW need adjusting for the controller to connect but a little care and patience usually delivers success. Hope it helps. rolandus.zendesk.com/hc/en-us/articles/115001506723-PCR-M30-PCR-M50-PCR-M80-Connecting-to-a-Computer

[@generalgrievous4925]

Would this work with pcr 30 on windows 10?

[@IVSpolly]

Hi. If you read the page attached to the link below it should walk you through the PCR M30. Good luck. rolandus.zendesk.com/hc/en-us/articles/115001506723-PCR-M30-PCR-M50-PCR-M80-Connecting-to-a-Computer

[@vynnelson1899]

Hello, do you have a solution about why the little screen turns off on the keyboard after a few seconds when connected via USB? Please respond

[@IVSpolly]

Hope this helps. noiseheaven.com/midi-keyboard-stop-working-solved/

[@vynnelson1899]

@IVSpolly I check all beforehand.. I looked online for solutions and others have the same problem where the little screen turned off although the keyboard indicates it's on.

[@pepo306]

Hi i had the same problem with my newer laptop idk why i connect it via usb but after some seconds the screen turns off but when i switched to my older laptop it somehow worked but now i am having another problem when i click the system key nothing really happens

[@IVSpolly]

@@pepo306 Could be a hard ware problem. If you have a 'dead' key it may be your keyboard key sensors need cleaning. It's a fairly simple job.

[@skippy7552]

had this issue using a usb type a to b. if you follow the steps fast enough it worked for me

[@camiloandresmunozbulla3978]

This also works for MAC 10.15 Catalina???. Thank you

[@IVSpolly]

Hi. Follow these instructions support.roland.com/hc/en-us/articles/115001506723-PCR-M30-PCR-M50-PCR-M80-Connecting-to-a-Computer

[@IVSpolly]

Read the instructions to the end.

[@pepo306]

Hello i have a big problem so when i click edit the screen says "edt" but when i click the system key nothing happens it stays on "edt" i will be very grateful if you can help me ❤

[@IVSpolly]

Hi. Follow these instructions. support.roland.com/hc/en-us/articles/115001506723-PCR-M30-PCR-M50-PCR-M80-Connecting-to-a-Computer

[@IVSpolly]

There have been issues connecting to windows 11.

[@IVSpolly]

Found this link too. Just press it and it'll take you to the page. support.roland.com/hc/en-us/articles/360052806851-General-Windows-10-11-Drivers-are-not-installed-automatically

[@IVSpolly]

Try this if 1 or 2 keys are not working. I did this and it worked. kzbin.info/www/bejne/gpbThmqCZ9Z5mtksi=xnalIM4b8x2FzvnI

[@IVSpolly]

I only cleaned the sensors and it worked perfectly but you can always add the graphite pen.