How To Connect Pvc Pipes Of The Same Size? The Plumber Won't Tell You

[@arunk5307]

Think good for bigger than 2 inch pipes and you are in an emergency, and cannot wait for coupling.

[@Alex-Tips]

that's right, buddy. it's true for certain cases, it's the case you're referring to. but filming here I can only simulate with a small tube

[@Sk-ik4ih]

But pressure loss will be very high which will cause damage This joint is not right may be joint will be very strong but other part may damage due to high pressure loss in one side

[@abhilashh3904]

It will cause blockage

[@marcellharmati2057]

As a plumber, I'm glad for this video, because it means that I'll have jobs for the rest of my life.

[@netpasya]

It's probably good for a cable conduit.

[@GPopeSinghTriniCharters1983]

😂😂😂😂

[@derikbaraka8475]

😂😂😂 was looking for this comment, this is going to leak from hat inner pipe cut point like a mofo 😂😂😂

[@lesley-annmathews7971]

It took me a while 😅😅😅😅 but will be fine for dry projects!😂

[@OthoKARL]

😂😂😂

[@udayquneis368]

No, the interior edge may cause waste accumulation by considering long of time, it may obstruct the flow.

[@Alex-Tips]

thank you for comment

[@GreatTips01]

i'm agree with you

[@PL-fc6hm]

and leak

[@jobo0115]

Considering the waste accumulation, it'd better set the source pipe insert into the drain pipe.

[@lightseraphim6816]

Exactly.

[@johnluiten3686]

You’ve put an obstruction into the pipe. A small restriction to the flow and a place where debris may hang up. If there is not alternative, fine-but an outside fitting seems more desirable.

[@Alex-Tips]

This is a temporary solution when you have not yet bought specialized accessories

[@johnluiten3686]

@@Alex-Tips That’s fine. However, that specifically is never mentioned in the “silent” video. One might therefore assume some folk watching such will assume the technique shown is a workaround without potential problems.

[@Alex-Tips]

@@johnluiten3686 yes. thank you. maybe I still have a lot of problems to improve in the way the content is communicated. I will change gradually.

[@DerekDuimel]

@@Alex-Tipsyou can still alter the title after you upload.

[@artistled]

I'm no plumber, but I'm willing to bet this has to be a code violation introducing toxic glue material to the inside of a pipe waterline if this is for drinking water or hot water that can melt it loose over time and cause massive failure. That's why I think a sleeve fitting on the outside is the correct and desired approach, not this makeshift Temporary solution for lack of not having the proper materials for the job from the get go. I wouldn't try this. I'd just wait till I get the proper fitting to join them. Sorry, but this is a fail and should be an instructional on what not to ever do. 🙅🤦‍♂️

[@niranjanpednekar9486]

This method reduces internal diameter, instead of putting small size pipe peace inside use bigger size pipe from outside to keep internal diameter same all the time, which is responsible for good water flow.

[@disquiet3163]

There's a difference between arts and crafts and plumbing.

[@SILVESTROThingS]

A much more durable connection can be obtained in the first method, which the author considered bad, it was enough to properly tear the pipe so that the length of the socket was the same as the diameter of the pipe, add glue or put a flat rubber gasket on the pipe with a smaller diameter. In addition, these pipes look to me like pipes not for liquids, but for electrical installations, so if they were to be laid in the ground, the connection point should be wrapped with a special rubber tape.

[@Alex-Tips]

Thank you for your opinion. You are a very technical person

[@quintenclark5280]

I admire your ingenuity in developing this method, I wish you positivity. BUT as an electrician who regularly pulls cables through long runs of PVC conduits, these internal pieces would just get in the way and increase the likelihood of causing damage to the insulation and/or conductors. Not only that, but this would not satisfy Code.

[@tamilgamerrobery152]

Easy fitting use coupling.

[@nonvihog]

Yes all rigt. . Frist step .

[@artfabrique]

Dont do this! That pipe will clog in 2 years because there is a lip inside

[@Chris-jd9wg]

I did it. I listened to him and didn’t listen to you. Now what are you gonna do? And that pipe will clog with what? You don’t even know the application. And clog in two years? Where did you get two years from? Get off your soap box; you know nothing, Alexander Vinogradov. Btw, I did this trick to connect a 4” PVC bathroom exhaust fan duct to the 4” side of a 4” x 3” PVC reducer to ultimately connect to the 3” diameter flexible duct going to the roof. IT WORKS!!!

[@selphoneidf9238]

This method is useful only when all the stores are closed due to pandemic. Otherwise go for a traditional straight connection using a straight joint.

[@Alex-Tips]

it applies to emergencies

[@primozkumar3909]

[@jayakumarmg5270]

This looks good. But, considering the flow of liquid first one is better. The second one causes a slight obstruction to the flow..

[@migranthawker2952]

My thought, too!

[@Alex-Tips]

yes. the 2nd one it applies to certain cases

[@ghedjatiissam5835]

. حوزظنظزننمممحخخ خوخ زن و زظظمحكجح ع هم

[@abdulrahman-em8zv]

Flow of water get reduced. External beauty is not concidered

[@Alex-Tips]

If the water pressure is not too great and the cut between the two pipes is tight and combined with the glue, it will not be lost

[@MetalWarrior-jb5cq]

​@@Alex-TipsWhat type of glue is that? What's the brand name?

[@BHK_DIYAtHome]

Not suitable for high pressure water sources, there is a risk of water leaking right at the cut, but it is also a good idea for constructing drainage pipes.

[@charlotte_z-c4k]

Good video, good idea, good luck to you

[@Alex-Tips]

thanks. where are you?

[@rchrdgrn]

No don't do it this way! There's so many points that that can leak heating the pipe and sleeving it would be better. The best way would be to make or buy an external. You could use an internal sleeve but use a solid pipe.

[@Alex-Tips]

When you don't have enough tools, this is a temporary solution

[@AdaManfaat]

Agree with Richard. The heating is a lot better on joint integrity. it is easy, but this video fake it like a hard job. I never fail doing it. This video method will easily leak on that opening internal sleeve, as it only has glue covering the gap. I think this video misguides people. Don't make excuse on temporary solution, you just didn't do it fair on heating the pipe.

[@Eskieditorrrriaslaksmsndma]

Great tip for connecting pipes. thank you

[@Alex-Tips]

thanks my friend

[@nguyenlongvu2560]

A hi hi đồ ngốc 😊

[@ahmadsantoso9712]

Bravo 👏 coolo triko 👍

[@Alex-Tips]

thanks

[@lenoraeating]

Very solid trick. congratulations

[@Alex-Tips]

thanks my friend

[@anggapradita2746]

it will be very useful when work in night and the store is closed and need to finish the job immediately.. thanks for sharing

[@Alex-Tips]

yes, thank you very much, and you can apply it to the ventilation duct

[@mojtabaalimirzaee7104]

Very good❤

[@ramanshinde1542]

Very good 👍🙏

[@Alex-Tips]

thanks my friend

[@kanalhersey9784]

Wish you always success with your work

[@Alex-Tips]

thank. good luck

[@wojciechkopacz7556]

Poland. Dziekuję za przypomnienie tych praktycznych czynnosci.

[@pikifrino]

Very good idea & a very good video!. Thasnk you

[@jsadlbhuj7340]

good solution muje jo chahiye tha mil gaya... thank you.

[@Alex-Tips]

आशा है यह आपके लिए उपयोगी होगा

[@tunahankocaer9444]

I learn some new tricks today.

[@Alex-Tips]

yes. let's accumulate for you

[@androidhack1630]

what you do is awesome

[@Alex-Tips]

thanks you

[@d3tailer32]

happy new year buddy

[@Yusuf-td5ll]

Does this trick worry about leaks?

[@Alex-Tips]

If the two ends of the pipe you cut them close together, it will not be

[@mestefee2681]

totally ok and nice. I did it and it worked

[@Alex-Tips]

thank you. is it good?

[@andynavarette9396]

This guy is a real pro I can tell by the way he used his fingers to apply the glue

[@Alex-Tips]

When you work for a long time, the manipulations will become skillful

[@nataliegasque8349]

😂😂

[@alibaba-ih2bi]

Thank you for sharing a great idea Have a nice day

[@Alex-Tips]

have a nice day

[@ilamdeenvlogs]

Good job sir ✅❤

[@indrakumarphulre4539]

At high pressure joints may leak

[@Alex-Tips]

yes, you can apply it to ventilation ducts

[@delboytrotter7902]

The plumber won't tell you......cos it's wrong !!!!

[@Alex-Tips]

it's not entirely wrong. it only applies to certain cases

[@thiransamarajeewa6753]

Very helpful for my aquarium tank

[@ulasch4142]

Thank you for sharing the trick

[@Tips24H-rj9pq]

good video i like it very much

[@MrManojknight]

Such a great idea! Do you have a similar approach for a T joint as well? Thanks!

[@Alex-Tips]

what you mean is to connect the 3 ends of the pipe to the letter T

[@MrManojknight]

@@Alex-Tips yes, exactly

[@СергейБурсаров]

Ну да, вся грязь скапливаться будет.😏

[@Alex-Tips]

it's also not that significant

[@natarajanu7472]

Yes dirt will accumulate

[@softmoon-5341]

How do I know if it's for sure?

[@Alex-Tips]

if you do the right technique it's ok. 2 cuts need to be tight together

[@doragollarajuyadav3987]

Good job 👌

[@Alex-Tips]

thanks my friend

[@Beagam]

great pvc pipe connection ideas

[@Alex-Tips]

do you think it's ok?

[@jacobdelafond2380]

Les meilleurs recommandations YT...

[@emreucar9843]

I think it is suitable for connecting the vent pipes

[@srt4b]

no!

[@BubupatianD]

Amazing kreatif 👍

[@Alex-Tips]

thanks my friend

[@Theking8454-c5t]

Thank you for sharing your very nice processing trick

[@Alex-Tips]

thanks my friend

[@freedomfan3277]

Just created a flow restriction and possible clog point. Just get the right part for the job.

[@Alex-Tips]

yes, i will find a way to fix the problem

[@two.friends]

Wish everyone to watch the video to learn many good tricks

[@snrankawat6819]

Internal diameter of the pipe decreased hence fluid pressure may drops

[@baggedmonster]

Pressure does not drop, flow does. Pressure will actually increase with restriction. 👨‍🔧

[@حمديمدريد]

very surprised. Good Idea

[@Alex-Tips]

How surprised do you find it?

[@hemiv8949]

great diy idea

[@Alex-Tips]

thanks my friend

[@chaelyw]

very good bro, the connection is nice and sure

[@Alex-Tips]

yes. it still works perfectly and no problem

[@karlinssilva3232]

very good. congrats my friend

[@Alex-Tips]

thanks my friend

[@Cleaningthehouse23]

Great Video Thank You For Sharing!

[@Alex-Tips]

thanks my friend

[@yusufimamoglu4879]

good connection idea

[@berkesevsinsizi]

thanks for your video. great trick

[@_art_maga1396]

very nice. What a great way to connect bro

[@Alex-Tips]

thank you

[@emirhanakay1350]

the connection looks very nice

[@Alex-Tips]

That's right, it's fine isn't it?

[@Alizadeparviz]

good technique

[@yogashiva9587]

Thank you very much.

[@Alex-Tips]

thanks my friend

[@KapsonluPANDA]

both beautiful and sure. very good tips. thank you

[@Alex-Tips]

yes. thank you. Please save this connection

[@ramazanugarck5767]

awesome with this trick

[@Alex-Tips]

thanks my friend

[@nguyenxuangiap9582]

Cách 1 là cách chuẩn và hợp lý nhất. Cách của tác giả hoàn toàn sai

[@kgz03131]

Для канализации такое соединение не годится. Засор будет. Для канализации надо соединять снаружи.

[@Alex-Tips]

с грязными дренажными системами не подойдет

[@jeffhughes6167]

@@Alex-Tips not suitable for anything, I don’t know where you are from but the pipe you’re using is not for potable water being to thin. The whole video is crap!

[@Retepesowadum]

Will it be able to withstand high pressure water flowing through it?

[@Alex-Tips]

it is for low and medium pressure

[@Retepesowadum]

@@Alex-Tips thanks, I fixed mine yesterday. So I have to see how it will withstand the water pressure. I used PVC weld adhesive

[@nolalove8909]

Thank you!

[@TWmolding]

Looks nice

[@Alex-Tips]

thanks bro

[@onurgocmen1524]

Thank you for sharing a wonderful way to treat PVC pipes. Have a nice day

[@Alex-Tips]

thanks

[@abdullahstyle5901]

Thank you for sharing it. I will definitely use this tip

[@Alex-Tips]

yes. Great tips to help you connect

[@airgunsapinas360]

The exterior is nice to see but remember that u are using the inside part of the pipe that need to be clean nd free from obstruction!

[@Alex-Tips]

Thank you for your Feedback

[@GreatTips01]

I agree with you, and usually I will connect the 2 pipes directly

[@zehrahocailegeometri5182]

good tips. very aesthetic and solid

[@Alex-Tips]

yes. It's beautiful isn't it?

[@tarkdemirbas6536]

great ideas

[@lalenga8249]

Thank you🎉

[@fikreteleftoz2690]

I love the connections, I hope it will work perfect

[@Alex-Tips]

yes. it works fine

[@serasersin7429]

good connection. I like it very much

[@Alex-Tips]

thanks you

[@vartolicio1007]

great tips

[@bertvandervorst5585]

Daarom lekt alles bij jullie 🤣😂 knoeiers .

[@Alex-Tips]

Dit geldt alleen voor bepaalde situaties. onder druk zal deze methode niet toepassen. Ik zal de juiste en zekere verbinding voor je hebben.

[@thetru4659]

Appreciate the video

[@Alex-Tips]

thanks my friend

[@KerfMan]

I may use this technique to make a CB antenna mast out of 2 ..10 ft sections of 2 1/2 inch PVC schedule 40. I'll make the internal sleeve longer so that the second PVC pipe will have more of the sleeve inside it. Giving the top pipe more strength in the wind.

[@Alex-Tips]

yes

[@wyliesaechao7425]

Now I can make my own elbow joints for racks

[@unicron12002]

This is a good idea for cosplay creators that want to transport their props in half . Good information

[@Dino_Channel_82]

great connection trick

[@AliMachine]

شكرا من القلب

[@we-qj7pj]

This idea is perfect

[@kanalkapatildi1]

This tip is very true and good. it is very suitable for large size pipes

[@Alex-Tips]

that's right

[@egabor8]

Thank you very much

[@huseynbaxsaliyev9824]

Share ideas.. interesting and easy to understand

[@Alex-Tips]

yes. thank you very much

[@pvcflutist]

Interesting !

[@kurtkrali1060]

that's what i need. thanks for the nice trick

[@knowledge-b8c]

good idea bro

[@Alex-Tips]

thanks bro

[@asdasdassad6504]

great pipe connection idea

[@Alex-Tips]

yes. thank you

[@LVS352]

Hay lắm bạn 👍👍

[@Alex-Tips]

thanks my friend

[@twitchfk9336]

nice connection trick. thank you

[@Alex-Tips]

thank you very much

[@fcfoot1142]

you did a great job

[@Alex-Tips]

yes. thank you very much

[@jozseffarkas1828]

Nagyon vicces!😀😀

[@JohnDoe-fb2ue]

Plumbers won't tell you this trick because it's a horrible trick. It create a lot of turbulence, disrupting the bondage as the water flows over the inner fitting.

[@Alex-Tips]

Perhaps you have never encountered a case like this

[@yusufartun5161]

great trick

[@henryw.h.3948]

You destroyed the outer discontinuity by adding new inner discontinuity. In my opinion, the original method is much better: simple to make and smooth for liquid flowing.

[@Alex-Tips]

thank you for comment

[@LegendarySkypenis]

​@@Alex-Tips no thank you for destroying people's pipes so they can call a real plumber.

[@M.Begley]

The 1st way, you say no to is far superior way, for so many reasons.

[@Alex-Tips]

yes, thank you very much