How To Connect Salus RX10RF Wireless Boiler Receiver Unit ( Smart Home )

How To Connect Salus RX10RF Wireless Boiler Receiver Unit. Salus Smart Home Range
#SalusSmartHome #SmartHome #Salus • Salus Controls
My name's Allen Hart, and in today's video, I'm going to show you how to connect your Salus RX10 RF Boiler Receiver to your Smart Home Network. This is part of the Salus Smart Home Range. We've already set up the UG600 Universal Gateway. If you haven't got that set up I will add a link to a video that we've previously done in the description below. So now we're going to power up your RX10 RF Boiler Receiver by sliding the bottom switch to the ON position. And also ensure the top switch is set to auto. Salus Controls RX10
So now we need to go onto the Salus Smart Home app on your phone or on your PC.So if we just open that up and we see we've got three lines on the top, click onto the three lines, tap on Settings.
And then if we go to Set Up Equipment and then we can see there we've got Scan for Equipment. Click on that and this could take a minute or so to scan for equipment.
And now we can see there we've got the receiver. So we'll just click on that, Connect Equipment,
and then you can name that to whatever you want. So if we just put on there, Boiler, click on Next, and Finished. Once connected the light on the receiver will turn a solid red. The RX10 RF is now on the Smart Home Network in the background. And if we just click on the three lines, we just click onto Equipment, All Equipment, and we can just see there, it's just there on the network. The RX10 RF Boiler Receiver has two modes of operation, Auto and Manual. Auto allows you to operate the system with your Smart Firm as that, and this would be your normal mode of operation. If you haven't connected your stats and your TRVs yet, then the manual feature allows you to override the system to give you heat.
That wraps up today's video. I hope you found it useful. If you've got any questions on the RX10 RF or any of the Salus Smart Home products, please leave a comment below. As always, like, comment, subscribe, all that good stuff, and we'll see you in the next video. Part of the it600 range.

[@AllenHart999]

#SalusSmartHome #SmartHome #Salus kzbin.info/aero/PLTjtaS435JQ97o53OiPcSqL4PLxQdnAiu

[@benperris6360]

Brilliant Video Allen. Making life easier !

[@AllenHart999]

Thank You.

[@user-jp3xv6fn3l]

Great video this really helps

[@AllenHart999]

Thank You.

[@matedwards3896]

Such a good video 😊

[@AllenHart999]

Thank You.

[@jstrong0]

Hey Allen, I have one of these and I have it set to RX2 mode to operate from a room stat, but the internal relay isn't operating, have you encountered this issue before? Cheers

[@bbrillltd1789]

Hi, I have the same problem. Did you manage to solve it?

[@jstrong0]

​@bbrillltd1789 Hi, yes I did. With it set in RX2 mode you need to add it to the system as a room extender. Also ensure you have the lid on correctly, I've also found that if the lid is not fitted correctly the lights will work but the relay will not operate. Hope this helps.

[@bbrillltd1789]

@@jstrong0 thank you, worked first time. Why don’t they just put that small detail in the instructions.

[@jstrong0]

Yeah I agree, it would be easy to add in the instructions where it mentions RX2 mode.