How to connect your Nemtek electric fence energizer as a zone on your IDS X-series alarm panel.

How to connect your Nemtek electric fence energizer as a zone on your IDS X-series alarm panel.

[@konraddorfling]

Really nice video! As a DIYer, information like this makes life so much easier! Thank you

[@88NA]

Your videos are really helpful. thanks

[@macfarlenetapula2823]

Great work sir, quite educating.

[@StudentCompanion]

Really helpful. Thanks a lot.

[@demo988]

Thank you for this 👍

[@robinpreston3374]

Very informative, thank you. Are you able to do the same with the Paradox EVO192 control panel? Many thanks!

[@quintonhamann1075]

Good video as always i see in some installations when connecting fence to the alarm some installers use 1 button remote by removing the button and connecting the remote to the siren output and i guess to the alarm reciever more like wirelessly can you emphasis more on that.

[@ecologicaltime]

thank you. i have more alarm videos and i will explain that concept in one of them. I have done that with a keypad and remote.

[@gkandishishi]

Thanks for the video, I realised this setup only is for zone/fence violation. Any suggestions how a energizer outputs can be used to monitor when it is armed or disarmed by a alarm panel such as the IDS. Crucial when arming panel and forget electric fence is not armed.

[@UnoVerve]

Can you show us how to hookup fence wires to the energizer ? And should i use conventional or bi polar on the wizard 4?

[@renierjoubert9176]

This is fantastic. Is there however to do this via a wireless such as sonoff switch, as my energizer is on the other side of the yard. Impractical to do via wired connection

[@christianbenson1493]

Good day, Quick question I have wired up my electric fence as shown on the video but my IDS system says that the zone is permanently open and wont be able to arm the system unless the zone is either bypassed or fixed.

[@joebbrorhie9946]

Nice video bro, you are doing well. What could be the cause of nemtek Energizer continue beeping when non of the fuse is blown

[@thulasizwemanzini489]

I would really connect my Nemtek electric fence energizer as a zone on your IDS X-series alarm panel. Help

[@MEENESS_Ltd]

Can I use multimeter to check it

[@aiyelesobabajide3925]

Can I use energizer siren output to trigger alarm with wireless panic button

[@KevBotes]

Awesome video. I would like to know if there is a wireless relay option that can connect to the Ids system wirelessly ? I did a quick search in google but no luck finding one.

[@ecologicaltime]

i have some more alarm videos being made, ill add this to the list.

[@petertrain4006]

@@ecologicaltime Any update on this? I would also be interested in watching.

[@garethnkem1091]

Thanks..for the detailed explanation... Please how can I connect a remote control switch to my energizer?

[@ecologicaltime]

ill do a video to show this

[@garethnkem1091]

I wish I can give you a hug😊😊..

[@ianmusa6965]

Howsit, how do I connect the enigiser wirelessly to the paradox alarm system, what device do I need to get to connect on the energiser and to connect to the paradox alarm

[@btecnologia9818]

My energizer Wizord 2I is flashing alarm permanently. How to troubleshoot or remove the fault?

[@iretiadaramola9381]

Pls what will do ? I lost the small round magnetic key for on and off.

[@ecologicaltime]

get one from Nemtek or Regal

[@monirabibihoosen5288]

❤❤

[@xvisionelectronica9683]

Hi, can it work with a wireless alarm system?

[@ecologicaltime]

yes

[@andreadfishing]

So I have the magnet to deactivate the alarm but it means I have to leave my house, go into the garage and deactivate. Which seems pretty pointless IF there is an intruder. How do I go about putting it on a remote that will deactivate and deactivate much like the magnet ?

[@ecologicaltime]

kzbin.info/www/bejne/gnPCpp2jr7F9h9U to do it with a remote, i am still going to make that video.

[@luckyomo6047]

what types of wire used to connect my eletrice wire fence allumim

[@ecologicaltime]

regular comms cable

[@luckyomo6047]

@@ecologicaltime thank

[@justelerire7288]

I am in Africa I have 3 large NEMtek central which bothers me, it's kidding, it's always the same problem, please help me find a solution, I want a number or an email address to better explain the problem to you j 'have I

[@justelerire7288]

I am in Africa I have 3 large NEMtek central which bothers me, it's kidding, it's always the same problem, please help me find a solution, I want a number or an email address to better explain the problem to you j 'have I