How to control 2 DC motors with ESP32 and L298N with mobile phone and Blynk app

[@SubhajitMukherjee-m7u]

Thank you sir bohot bohot sukriya is vdo keliye bohot help mila isse mereko

[@mohammad1906]

Sir only one of my two motors is working, where could be the problem, all' the connections are perfect?

[@FixitEasyDIY]

Please check the coding once again

[@mohammad1906]

Thanks sir. It worked ​@@FixitEasyDIY

[@FixitEasyDIY]

I am glad to hear that 😊

[@mohammad1906]

Do you have any video explaining how to connect ESP32 to the MPU6050, I'm trying to make a self balancing Robot? Can you please help me

[@FixitEasyDIY]

@@mohammad1906 Unfortunately I never did that

[@chxcha6]

hi sir i want to ask question, if the battery used is 12volt for the driver, should i connect esp with the usb also or is it not necessary because the 12volt is enough to power esp ?

[@FixitEasyDIY]

ESP 32 requires 5V input power. You need to power it with 5v and separately the Motor driver. This one has 5v output for it

[@vigneshsm3313]

I dont have 5v pin in esp where to connect 5v out from motor driver to esp

[@FixitEasyDIY]

All my ESp32 boards have 5 V pin. Could you check it once again please.

[@KnightBear123]

Can i use different wifi? I mean wifi 1 for my car and wifi2/internet data for my phone is it work?

[@FixitEasyDIY]

Unfortunately not. The wi-fi will be occupied by the car's network.

[@mohammaddarr4017]

It is a great video, can you please guide on how to use LCD here to show the set point of the dc motor as well?

[@FixitEasyDIY]

To be honnest I could try to make it, but I am not sure right now how to do that exactly. ;)

[@mohammaddarr4017]

@@FixitEasyDIY it is okay, actually I have a project on this and that is why I asked you to do it.

[@peacemaker5909]

I'm using this for wheels for a model plain which can be controlled by phone 📱 by blynk app and thought esp 32

[@FixitEasyDIY]

Me too in one of my projects. Nice thing to have is this motor driver.

[@vh.h]

У меня ест вопрос, вазмажна ли управля ету канструкцию (механизм) через какойто пулть? (Ты исползовал приложение) Который самому собрать можно.

[@FixitEasyDIY]

Yes that's right. This application is Blynk and you can assemble it as you like. It works through WiFi

[@عبدالله-ي9ب3ص]

neat job! can you do it with ESP8266

[@FixitEasyDIY]

Thanks 👍 It should be pretty much the same. I just like ESP 32 ;)

[@AbdullahAl-Farehy-iu9ot]

I dont get about the connection of ENA and ENB

[@FixitEasyDIY]

Just follow the diagram my friend. It will work perfectly ;)

[@sanjalshetty6120]

I can add only 5 data stream 😢 can guide me pls

[@FixitEasyDIY]

I guess you have been using the Blynk credits for some other project. Try register new Blynk and it should work.

[@fiqielzbukanmanusia3301]

how about esp wroom-da module

[@FixitEasyDIY]

It would work the same ;)

[@rafiabrar4511]

Sir I need the code

[@FixitEasyDIY]

Here is a link with wiring diagram and Arduino code: drive.google.com/drive/folders/1ZJWje165Ki-BPlnqtT2YS1kQPiX_oMQR?usp=sharing

[@loydshaju7120]

is blynk free to use

[@FixitEasyDIY]

I am using it for free :)

[@peacemaker5909]

How

[@ashishdubey8136]

Can you provide a code

[@FixitEasyDIY]

Here is the wiring diagram and Arduino code: drive.google.com/drive/u/0/mobile/folders/1ZJWje165Ki-BPlnqtT2YS1kQPiX_oMQR?usp=sharing&pli=1

[@ashishdubey8136]

@@FixitEasyDIYThans buddy love from India 🇮🇳

[@peacemaker5909]

How to use it for free

[@TzuyuTT]

Max 5 datastream for free..how you can get 6??

[@FixitEasyDIY]

Honestly I don't know 😔

[@peacemaker5909]

How to use blynkfor free without subscription

[@FixitEasyDIY]

Honestly I don't think it's possible. Subscription is free, at least for some similar projects. I used free accounts for this project.

[@siddharthkoppu6901]

Code for 4 motors

[@FixitEasyDIY]

Its the same 2x2