How to control Nema17 stepper motor with L298n motor driver.

In this video we will learn how to use NEMA17 stepper motor with L298N motor driver.
This is bipolar stepper motor some times the motor did not display the wiring diagrams
we have to identify the wire of the same coil.Please dont skip so that you would not miss any explaination in this video. Thanks for watching.
Download the code here;github.com/passion-tech/Hello...
Music in this video;
Music credit to;
Song: Ikson - Blue Sky (Vlog No Copyright Music)
Music promoted by Vlog No Copyright Music.
Video Link: • Ikson - Blue Sky (Vlog...
Music credit to;
Song: Fredji - Happy Life (Vlog No Copyright Music)
Music provided by Vlog No Copyright Music.
Video Link: • Fredji - Happy Life (V...

[@AmirHamza-wi7os]

For those who are wondering how to change motors direction just put (steps_per_rev/ -100) at the end of the code. It worked with l298n (Green) .... but I cant tell whether it will work with l298n (Red)....Anyways Aewsome Video....❤

[@dhanushhr3342]

Thank you it worked great

[@passiontechklm]

🤗

[@HoXDipannew]

Very nice tutorial

[@passiontechklm]

Thanks alot bro 🙏🙏🙏🙏🙏

[@AmirHamza-wi7os]

thank you❤

[@Sohail-fi3dl]

appreciate

[@nobrane6139]

AMAZING !!!

[@nobrane6139]

subscribed an liked

[@passiontechklm]

Thanks bro 😊

[@braulioayala6574]

What is your current in your 12V supply??

[@DomBurgess]

Thanks for the video! I have an Nema 17 hooked up to a L298n and an Arduino. I have no issues operating it, but I'm having problems powering it. If I use a 5v 1a supply, it works but torque is low. If I use a 12v 2a supply, the torque is great, but the L298n pulses ever second or so which sends power to the motor. It doesnt appear to actually turn the motor, but it makes a buzzing noise which is VERY annoying. Do you know why I'm getting this pulsing from the driver?

[@passiontechklm]

This is all because of l298n driver current not enough to support Nema 17 stepper motor current,basically this driver can handle only up to 1 of continuous and of peak 2A , but if you add bigger size of heat sink will be solve .

[@eduardoguedespavao4793]

How can I do this with arduino nano? I tried to change the pins from 1,2,3,4 to 9,12,13,14 (nano pwm pins) with no results...

[@dablet]

has anyone gotten this L298N+Nema 17 to work with ESPHome or Tasmota? if so, could you please show the wiring diagram as well as the codes?

[@yessyayuamandasari5710]

I want to ask, if you want to change the direction of rotation, how do you do it?

[@user-ig8zc2yq9n]

Change motor wires

[@electronicsideas1361]

Fantastic .Circuit diagram please

[@phattangpt0939]

your video is very good. let me ask when i supply 12V/5A to L298 and nema 17 stepper motor then after some time the motor and l298 get very hot

[@passiontechklm]

L298N is peak 2Amps so to be able to handle the NEMA 17 you have to change the heatsink to the lager size and give air flow to the heatsink something like a mall fan to blow the heat.

[@annamotiwale1998]

Can we use 6 pin stepper motor

[@alisatheeralap8763]

Very nice, Can I use with Jetson nano

[@passiontechklm]

Yes, you can use that

[@justinalentecer]

Helo, thanks for the vid. My motor isn't turning smoothly but stopping what do you think might be the problem? thanks

[@passiontechklm]

May be your power supply current not enough?

[@robertgubberiksson2068]

Nice tutorial! I have done exactly as in your video, with the same components, but my driver gets really hot. Do you have any idea why?

[@passiontechklm]

this driver is peak 2Amps only but if you add bigger size of heatsink its will be fine.

[@muhammadmudassir6343]

sir all these video that use L298n are fake this driver is not suitable for NEMA 17 I've tried it and it gets super hot , so the solution for this is a4988 driver which I also used practically and working fine

[@unodragon2294]

@@muhammadmudassir6343 do you maybe have a code I wanna control a nema17 as a servo motor with potentiometer

[@diegoalbertomartinezgonzal889]

Puedo conectar una fuente conmutada 12v 10A al L298n

[@kondordv]

what driver do you use for unipolar stepper motor?

[@passiontechklm]

There are many stepper motor drivers out there depending on current holding.... like a4988 , uln 2003 driver etc

[@symontorres3952]

Is it possible to add relay module 12v to 220 instead of a battery(newbie question)

[@passiontechklm]

As I understand your question....12V relay module means you need supply 12V to active the relay on and off but the load side Com to No is can apply either 12V or 220VAC .

[@faresalkhoor4405]

can we use two nema stepper motor on one L298n motor drive

[@passiontechklm]

No you can use two because l298 module is just 2Ampier so it will burn out.

[@amalmahmoud2185]

Can i connect nema 23 with the same way?

[@passiontechklm]

Yes you can connect it the same way bro

[@amalmahmoud2185]

@@passiontechklm Thank you so much 😊

[@passiontechklm]

@@amalmahmoud2185 you are welcome bro

[@aaryaprayagi1929]

Can I use 9v DC current?

[@passiontechklm]

9v is not support for this stepper motor

[@aaryaprayagi1929]

@@passiontechklm so I can use a 12V battery right?

[@passiontechklm]

@@aaryaprayagi1929 Yes can

[@aaryaprayagi1929]

@@passiontechklm ok thanks

[@BlesTtag002]

The controller gets hot, is it normal?

[@passiontechklm]

Yes, that's normal but to get more reliable need to add bigger heat sink.

[@carfiallos]

Hello, my stepper motor just vibrates, it doesnt rotate??? do you know why??

[@passiontechklm]

Normally that issue happen when the current is not enough to push the motor or when signal is not detect properly if you use the driver

[@TheSquire101]

@@passiontechklm Can you share with us the power supply you used

[@passiontechklm]

@@TheSquire101 you can use 12V 3A AC/DC power supply

[@timlesellier734]

Hello, I have the same problem (the motor vibrates but does not turn). I have a 12V, 1.5A power supply, is this the problem?@@passiontechklm

[@m3dp_official]

not working..................very disappointed