How to control your Siemens PLC remotely over Ethernet with RUT240?

[@rscottalex]

Tried something similar on different PLC. Although it worked, due to the slow speed of the VPN, using our own OpenVPN server seems to be significantly faster. Maybe with more VPN servers in America, I might recommend for US clients, but not presently

[@TeltonikaNetworks]

Thank you for your feedback. We currently have a VPN server located in US - Virginia. If you have a specific need please contact your Teltonika sale representative.

[@prasadpulishetty]

Do you have a VPN server in India

[@SCHEGS]

3:26 Is there any specific configuration I need to do so that I can see my PLC on the scan device list? Mine is saying "No IP's available on selected device"

[@TeltonikaNetworks]

To begin with, it is important to ensure that the PLC is properly configured. You can then check if the router is able to communicate with the PLC by using the ping command to send a test message to the PLC's IP address from the router. If the PLC IP address still does not appear on the list, please get in touch with our engineer team at Crowd Support Forum. (community.teltonika-networks.com/) They would be more than happy to help!

[@СеванМкрт]

@@TeltonikaNetworks I have the same issue. I have direct connection to PLC, have ping respond. But TIA Portal use some specific protocols for search for "accessible devices tool". DCP and LLDPD. Even when I installed them on my RUT 955 tool does not works.

[@TeltonikaNetworks]

@@СеванМкрт Could you please get in touch with our engineer team at Crowd Support Forum (community.teltonika-networks.com/) and describe the situation that you are currently in?

[@rickardk7229]

Wow This is exactly what i was wanting!

[@TeltonikaNetworks]

Thank you for a positive comment!

[@rickardk7229]

@@TeltonikaNetworks Thanx for a über product! RMS is awesome!

[@rickardk7229]

@@TeltonikaNetworks Im in the place where im going to buy atleast 5 more teltonik rut240, are there any way to get discount?

[@mattiadaldegan5822]

is it possible to search a siemens device in the network? In other way is present the access to layer2 of lan network?

[@СеванМкрт]

Good question. I am also interested in this question. Since for the 3rd day I can’t reach PLC with "Accessible devices" toll in TIA. Dear Teltonika support team maybe you know how we can handle this issue?

[@AlexVUA]

No, it's not possible, I tried... So for this I use IBH Link IoT with TeamViewer Licence

[@hmtrajkot]

hi i need your guidance to send offset data from RS485 to siemens controller. We want to send measurement value ( i.e. =/-0.020 MICRON ) to siemens controller but doesn't able to find proper communication procedure. for Fanuc we can do it through Rs232 to Honda connector and sending m99 file string but with siemens we are not able to find solution.

[@TeltonikaNetworks]

Hello, Please contact us via Crowd Support or via VIP helpdesk, we will assist you there. Here you can find a link to our support forums: community.teltonika.lt/

[@igortobilevych6997]

Which settins do we need to setup fo Teltonika router device(client side)? LAN settins, etc?

[@TeltonikaNetworks]

Make sure that Teltonika Networks devices has internet connecivity and is online in RMS. No further configuration on the router is needed if you are using RMS VPN.

[@mightystrange.2234]

I have similar issue and I seriously need help solving them… in my own case we have a private LTE which is to be used in this connection.. The Router model we got was RUT 200 because it’s one of few devices that supports our private LTE type (B40).. Security policies makes it difficult for us to connect the directly with the public IP, the configuration process so the PLC and our virtual server communicate is the issue..

[@TeltonikaNetworks]

Could you please specify if you are still experiencing any issues? In case you have any questions or still face any issues with Teltonika Networks' equipment, please get in touch with our engineer team at Crowd Support Forum. (community.teltonika-networks.com/) They would be more than happy to help!

[@vetalkhomenko8069]

Good afternoon, which Teltonika router models support this method of connecting to the PLC? Or is it only RUT240 that can do this?

[@TeltonikaNetworks]

Hello, you can achieve this with any Teltonika Networks router.

[@nikolaydionisov6241]

I have several Siemens S7-1200 installed in various locations. I want to access their WEB servers over the internet. In the places where the controllers are located, there is internet from different providers with dynamic WAN IP addresses. Can I use RUT240 for the purpose and in what configuration?

[@TeltonikaNetworks]

Hey, thanks for the question! You can connect PLCs to the router and set up DDNS configuration along with port forwarding rules. Check out this link for more information about the DDNS feature: tinyurl.com/yzm5ejun You can learn more about port forwarding rules here: tinyurl.com/y4j775we In you need further assistance, don't hesitate and reach out to our engineers at the community support forum: community.teltonika.lt

[@MrPcwortex]

When setting up a router's IP address, you use a private IP address or a server's IP address. Another issue I encounter is that when I connect to OpenVPN, my PC goes to the blue screen of death :(

[@TeltonikaNetworks]

When configuring the RMS VPN hub, you select the PLC's IP address, which is later also being set on the PLC itself. Regarding the BSOD, you should refer to the OpenVPN forum.

[@fatonaoladimeji9697]

I have the same issue. Someone mentioned that it's because you have the Simatic Automation Tool Installed. Check on a different system

[@80andybrown80]

So the remote router must have some sort of public IP to establish the VPN tunnel. Can you explain ? I assume the remote router is dialling up to the hub ?

[@TeltonikaNetworks]

A public IP is only required if you want to access the device directly through a custom VPN tunnel. With Teltonika VPN, a public IP is not necessary; only internet connectivity is needed.

[@zakaryabennanni]

well do i need arouter with my pc and another router bside my also to make avpn tunel right, so i need to buy two rut240 routers? also i want to ask you about somthing else i have a plc s7-1500 here in my location and i do have et-200 in another site is this methode could be good one ?

[@TeltonikaNetworks]

Hello, Regarding the RMS VPN, you can create a VPN tunnel with just one device, on the RMS you will create a VPN server, and the VPN client can be your computer. And you can use just one router to reach either of your PLC remotely from your computer. IF both of your PLCs are in different locations then you will need two routers.

[@ItsFlevine]

Is RMS a substitute for OPC UA or Modbus TCP? I have a TRB245 router and an Siemens S7 1200 PLC. I want to integrate the two. I configured the s7 1200 as an OPC UA server but I'm having trouble accessing the PLC data when I try to configure the TRB245 as an OPC UA client. Kindly assist.

[@TeltonikaNetworks]

Could you please get in touch with our engineer team at the Community Support Forum. They would be more than happy to help!

[@Mohammad1997sh]

I will connect two plc wireless together and transfer data between this 2 plc wirelessly, and distance is 100 meter. Delta dvp28sv and 1217 siemens. Rut do this job?

[@TeltonikaNetworks]

Hello, In general, Wireless communication on Teltonika devices in outdoor environments can reach up to 100 meters and in indoor environments up to 30 meters, so you might be required to add additional devices in between.

[@gualassss]

Can I centralize many PLC in your VPN server? Can I create a SCADA system build from many remote stations?

[@TeltonikaNetworks]

As long as your end-devices are connected through a Teltonika Networks router, you'll be able to remotely access them via the RMS VPN with ease.

[@parvinder3316]

I'm trying to use this service for SCADA which is located away from my plc. My concern is do i have to connect to teltonika vpn service everytime my pc is turned off/on or it will be connected automatically

[@TeltonikaNetworks]

You can setup OpenVPN application to run everytime you start your computer.

[@RicoNel-e8o]

I am trying to connect to a mitshubishi fx5 plc using this method followed all the steps. Have the vpn up and running but the plc is still unreachable. Any help would please be great?

[@TeltonikaNetworks]

Hello, We would like to ask you to register this issue on our Teltonika Community, where we will be able to analyze it in detail and help you resolve it as fast as we can.When you will write your questions do not forget to give us as much information as possible regarding your current configuration. Here you can find a link to our Teltonika Community: community.teltonika.lt/

[@driesdebouver8362]

Do you need to select the TAP-Windows Adapter V9 in the PLC software to get it to work?

[@TeltonikaNetworks]

In this video TAP-Windows is selected in the PLC.

[@electromecanica_automatismos]

Hi....I have several issues in my Factory. Which Teltonika Router provides more solutions? RUT 240??? RUT241??? Which is the best equipment? What is the differences between both devices? Which provides best communication? It is my first time to attemp create a tunneling/VPN communication for maintenance tele-services...thanks a Lot Best regards from Spain

[@TeltonikaNetworks]

RUT240 and RUT241 devices share many similarities, with the primary distinction lying in their hardware components. The software remains consistent across both devices. For further information on the devices and their configurations, feel free to check out the links provided below: teltonika-networks.com/ wiki.teltonika-networks.com/view/Main_Page If you have any more in-depth technical questions, I would suggest getting in touch with our engineer team at the Community Support Forum. They would be more than happy to help!

[@gregorh.7137]

Can I use RUT240 for connecting Siemens S71200 on SCADA? Thanks for your answer.

[@TeltonikaNetworks]

The RUT240 is a versatile router that supports a range of industrial protocols, including Modbus TCP and Modbus RTU, which are commonly used in SCADA systems. It also supports various VPNs, making it suitable for secure remote access and control.

[@chrisleoflg]

Hi, it doesnt work for me, i followed all the steps, everything correct, but my computer doesnt ping PLC, I am in Ecuador, maybe there is no coverage for this country? or what could be happening.

[@TeltonikaNetworks]

Check if Teltonika device is reachable from your PC. If you can reach Teltonika, you should be able to reach PLC in local network as well. In some cases Masquerading has to be enabled for LAN interface as well in NETWORK -> Firewall -> General Settings. For further troubleshoot I would advise consulting on our community forum: community.teltonika.lt/

[@gualassss]

This remotely controlling needs a public IP address on my SIM card which is installed on RUT240 ?

[@TeltonikaNetworks]

To enable remote access to your devices, a public IP address is indeed necessary on your SIM card. However, if obtaining a public IP isn't feasible, leveraging RMS VPN offers a convenient alternative for remote access.

[@anoonautomation3290]

Can you try test remote over internet with Mitsubishi (FX5U), I try many weeks don't success.

[@TeltonikaNetworks]

We can't directly help with Mitsubishi (FX5U) since we don't have it. But, please get in touch with our engineering team at Crowd Support Forum - community.teltonika-networks.com/ with more information about the issue.

[@deneme_plc]

I did everything you said, but I cannot access the PLC, I cannot even ping it. Can you help the PLC?

[@TeltonikaNetworks]

For device troubleshoot, please reach out to us via our community forum: community.teltonika.lt/

[@prasadpulishetty]

My remote plc location is more than 1000 metres. Can this router is suitable for me

[@TeltonikaNetworks]

Any Teltonika Networks router is a perfect fit for this task. With RMS, you get the convenience of accessing your devices from anywhere around the globe, as long as they're connected to the internet and active on RMS.

[@albertkomar]

Great!

[@TeltonikaNetworks]

👍

[@HoaTran-hq7eo]

I assume it works with any plc over ethernet?

[@TeltonikaNetworks]

In this case a use case with Siemens PLC is demonstrated. But you can use RUT240 with any other PLC.

[@HoaTran-hq7eo]

@@TeltonikaNetworks do you have any video on how to collect PLC data and send it to Azure or AWS?