How to convert car radio in to home stereo player!

In this video, I show you how to take a car stereo (older, or newer), and convert it to a home stereo option for your garage or shop, or even inside the home...and the important part is you don't use a car battery or anything like that...this is the RIGHT/safe way;-) **disclaimer...this video is intended for entertainment purposes...do not attempt without consulting a professional***

[@MAB4149]

Just had my old car radio replaced with a Pioneer (DEH-S7200BHS) in my 2005 RAV4 and want to try this with my old stereo. I looked through so many of the DYI videos as a beginner and this is the one that I could follow. Would be great to keep using my old Toyota radio with its CD player (and cassette player!). Fingers crossed, I do it right. Thanks so much.

[@CSpeakerNawe]

This is the simplest video that i have came accross,that for coming to our level of understanding.

[@hurstysgarage]

AWESOME to hear C Speaker Nawe!!! I'm just glad you watched the video, and you gave me a comment that put a smile on my face:-)

[@DFS-ODC]

Very very useful and it works !! Very detail !!

[@kendallgillespie3783]

Awesome. Wiring my marine radio I have in my enclosed trailer like this so I can have a radio at the race track! Thanks.

[@bear_garage]

This is awesome Im currently working on a gaming room audio equipment and now I found my weekend project

[@hurstysgarage]

Awesome, that's what I like to hear Bear Garage! It's a fun little project that isn't to hard to do, and is customizable to your needs. Let me know how it goes please😁

[@beezythegamer]

Same thing I’m doing, I just have a plastic 10A thing on it

[@antoniophx99]

Thank you so much for this video! It really helped me out!

[@hurstysgarage]

Glad it helped Antonio:-)

[@user-mj8eq1br1e]

Thank you very much, you helped me a lot

[@joehope624]

thanks sir this was very simple

[@Zbee167]

Good stuff! Thanks for sharing.

[@hurstysgarage]

Thanks for watching!

[@maximusmeridius1272]

Quite well explained and demonstrated, I enjoyed it a lot, UNTIL... at the very end you decided to talk about how it is dangerous to connect this car stereo to a battery. So, my question to you is what if the garage does not have power or in my case I want to hook up a car stereo in my camper that only runs off house batteries (ie: some of us have to connect to a battery). If you are going to make wild and bold statements like you did about connecting to a battery you need to back it up with describing exactly why.

[@duflyingdutchssswest-fries4941]

I have a Pioneer radio and use a 230v A-C to 12v DC 2 A brick And it works !

[@hurstysgarage]

That will work to De JenZZen...Love hearing how other people do these little fun projects too. Thanks for sharing your "build" and commenting:-)

[@fawlooda4318]

how to connect amplifier with it

[@fawlooda4318]

like so he can see

[@hectordeleon8750]

There should be a rca input for amp plug the rca from the stereo to the amp

[@hectordeleon8750]

I also suggest using a Xbox 360 brick for better power

[@walterkitsi1818]

Thanks man

[@brian.castrejon6888]

Sound stream vrcpaa-70m I had a shorted fuse I fixed it (not replaced fixed that exact fuse) I get power but no sound I had two little speakers from an old Makita radio hooked each to separate speaker sides but im not producing sound? Any help

[@BurgerEater289]

I have a question. What if, instead of connecting directly to speakers you were to connect a female headphone jack so that you could plug in headphones or powered computer speakers? My concern is that the 200w car stereo (50w per channel) would send too much power to the headphone jack and blow something out. Would I just need to keep the volume low? thanks

[@muhammadsyafeibinsaupi7211]

Very clear tutorial ur done mate. I have an Eclipse AVN669HD which I try powering on using Computer PSU. It supposed to be okay once i connected the ACC and Batt wire to the PSU 12+ V wire. It did start with the sound of the system turning on, the button light also came up. THe problem is, the screen refuse to light up. Is there any connection that I am doing it wrong. Or its just screen being faulty?

[@hurstysgarage]

Hey MUHAMMAD...yeah, it sounds like the screen is faulty from what you are describing, especially since the sound is on. Kind of has me stumped though, without me being able to actually "play" with it to see what I could come up with. Sorry I couldn't be more of assistance. Let me know how it works out for ya;-)

[@JONJon-COD]

The screen isn’t going on probably the safety feature of the radio for it show a picture the vehicle should be in park or neutral usually it’s bypass with a button or rocker switch

[@BrianFM79]

Would this work with a 14.5 volt, 4.5 amp adapter?

[@gabrielgonzalez6323]

Is there a way for it to save the settings if you turn it off and on???

[@Bleh209]

Where did you buy this stereo tablet? I need one for my car

[@user-rt7lt4hf7s]

What about the antenna wire or plug in

[@thealchemist7822]

Thanks

[@kal18990]

Hello boss can can you tell me how to fix low voltage usb usb not identifying headunit voltage less than 5v

[@d.s.w7779]

Can the pre amp outputs connect to a home stereo

[@carlosstaggers1059]

Hello are you able to hook a amplifier to it

[@randywilson4248]

The laptop charger that I have says 19 volt 3.42 amp. Is this still acceptable?

[@joehope624]

pls does this adapter last longer

[@saurabhxgaikwad]

BOSS WORK! 🫡🫡🫡

[@normkirk65]

What about the station memories and the clock and all the other radio settings ? Won't those be lost when the power adapter gets shut off or interrupted ?

[@hurstysgarage]

Yeah, you are correct normkirk65, if you unplug adapter. Only way to get around this, is to leave adapter plugged in, or use a battery backup, but then you might as well go another route. Did you try this (project) by the way? What unit did you use? Anyways, THANKS FOR WATCHING, and for commenting!

[@dixy2406]

Nice demonstration but ime sure you should of installed an inline fuse just incase these old units develop a fault and cause a fire

[@wileyatteberry6090]

What if I want to put bigger speakers that take more watts would I need a amp? And how would I set that up

[@hurstysgarage]

Hey Wiley.. you can put bigger speakers on there but, the output of the signal is only going to be as much as what the stereo is it originally rated for.. and hooking up an amp would require its own power source and would further require another adapter. It's possible, but then you run into the issue of how many watts and amps another calculations you would need to satisfy the system, and that specific for every application. Thank you for watching and commenting.. and for the scope of this video, I would just say to stick with the head unit and not complicate it with a amp:-)

[@detroitrugcompany5972]

GREAT video… only issue is it comes on but as soon as I hook up the speaker it shuts off! Hooked it to a power wheels battery and no issue.. I want it plugged in the outlet tho. Using a Pioneer BT-160 double din. Do I need more power? I’ve tried adapters with more power and it doesn’t even come on!

[@kempframk]

We're can I buy one is already built

[@ZH-Rocks]

Thank you so much

[@hurstysgarage]

Glad you liked it Z H! Did you convert one? What was it? Have fun:-)

[@ZH-Rocks]

@@hurstysgarage not yet,was looking for ideas to use my car stereo i would definitely use it in my kitchen.your video is a great help.thx again🙂

[@hurstysgarage]

Yeah, that is a good idea...I have mine in my garage:-)

[@anthonystech1016]

Hey what's up man! Awesome video! I want to do this in my own home, and I want to try to get a stereo head unit that has HD Radio and Apple CarPlay built in. Could this be possible to do? And maybe would it be possible if you can do it for me cause I think I would probably mess up with the splicing of the wires lol :) Your probably more of a professional at this than me...

[@hurstysgarage]

Absolutely Anthony, totally possible! And you got this buddy...I swear it is not too hard:-) Thanks for comment, and let me know if you decide to go through with it.

[@anthonystech1016]

@@hurstysgarage Hey man! Thank you for the response I just read it just now, I wanted to find out if you can make one like that for me and ship it and how much would it cost?

[@anthonystech1016]

@Hardworking Man Why are you calling me a scammer for? I commented 8 months ago and you just replied now. What did I say that you think I’m a scammer?

[@anthonystech1016]

@Hardworking Man so your saying I can’t ask a legit question about my car to a KZbinr? I can’t ask questions about the product the dude is showing? How is that being a scammer?

[@anthonystech1016]

@Hardworking Man I understand what your saying, and the points you were making, I really do. But asking for an estimate with shipping does not necessarily mean that I’m not going to pay the man for building the system for me and shipping, the parts needed and all that. Of course if he does an excellent job, then heck I’ll even give him a bit extra, I wouldn’t f with his time or his efforts. But Unfortunately I will never know the price because it’s been 8 months and he hasn’t responded back to my comment. I get it things happen, I don’t expect him to respond in 2 seconds either, you know🤷‍♂️

[@dalkbing9245]

❤❤❤❤

[@itsgezuz]

I tried doing this with a cheap radio. The radio turns on and it’s looks like it’s playing music(the little waves in the back jump up and down) but no sound is produced, I also have a subwoofer connected and it’s doesn’t produce sound either. You might think it’s because the stereo is cheap?

[@itsgezuz]

Everything turns on but no sound

[@hurstysgarage]

Crap Gezuz...this has me stumped! I usually always try the easy stuff first, so I will start with the first thing that I can think of which is make sure that your connections to the radio and to the speaker are correct and made it up properly and are not exposed. Then if that doesn't work, and you have another speaker that you can use to check on real fast, that would be exceptionally helpful. But like you kind of said in your response, I am suspecting that the radio might be the problem and not actually the speakers, cuz it would be a real weird coincidence that all the speakers would not work including the subwoofer. Sorry that I don't have a absolute answer, but let me know if you get the problem solved because now you can sparked my interest.. thank you for the awesome comment and for watching:-)

[@andrew8293]

I did this with DMHD1000 HD Radio reciever and it worked. The only problem is that the RCA audio output is way to powerful. I'm using a 12V 800mA power adapter. Does anyone know the best power output? Should I try a 12V 500mA or go higher at 12V 1.5A? I know it's putting out too much power out on the RCA connectors because when I "mute" the reciever the output audio is quieter and clearer. No, the DMHD1000 does not have bult-in volume control like a regular steteo system.

[@andrew8293]

I tried another 12V 0.75A adapter and it did not fix the audio issue. I tried using a modified Car cigarette lighter jack that I plugged into my 12V 500mA USB to cigarette lighter adapter and the device snaped on and off and wouldn't power on. I ended up giving up and just switching back to the old power supply and using the RF modulator with another radio for clear audio which is fine because the device that I'm hooking it up to also has a radio.

[@JReese2013]

What about “illumination” and “key” wires? Would those also have to go with the positive? Also, what’s the difference between “ground” and “swc ground”?

[@hurstysgarage]

Hey Jon...the illum and key wires aren't used or needed in this application. And, What is SWC GND? The KEY 1 and KEY 2 wires are connected to one another. The reference signal is used for the SWC. When keys are pressed, the black wire outputs the reduced voltage. It is not part of the ground. So, in short...that is for steering wheel controls, not the actual ground wire. Hope that helps buddy...thanks for post, and let me know how it goes!  homex.com › ask › what-is-s...

[@professor_chinx6996]

How do you add an antenna? To just play regular FM/AM radio???

[@yayrdiaz-baltazar8626]

Hey man am i allowed to connect any speakers or do they have to be a certain type ?

[@hurstysgarage]

Hey Kilo...pretty much any speaker will work, but like any other system, if the source head unit is only capable of so much output power, and speakers can handle more, you won't be able to utilize the full capacity of the speakers sound...just like if it was hooked up in your car. But no, you won't hurt anything;-0 Thanks for comment Kilo!!!!

[@darronorange970]

Can I cut a plug off of my extension cord and use it for power source?

[@hurstysgarage]

Great question Darron! Short answer, NO. It will fry the circuitry in the head unit FAST. Only way that works, is if you cut and splice into opposite end AFTER 12V converter if your converter is in middle of original line (course, then there would really be no need to do that anyway, unless the outlet plug was damaged from your original 12v power cord). Thanks for commenting!

[@tg5717]

Curious...do you think I need to add a fuse

[@hurstysgarage]

Great question TG...and my answer is, is that it couldn't hurt. Especially if this is going to be a long term "addition". But, I don't necessarily think that it necessary. As always though...if there is any doubt, always consult a professional...it is better to be safe than sorry! Thanks for the awesome question though:)

[@AntoineFinch]

SKIP TO 10:35 !

[@gopiindax1021]

Great... I tried... It works... But home wifi is not getting connected... It will be helpful... If solved...

[@nicholastheron9493]

Why can't I get mine to turn on, I'm doing the same thing, does it have to be certain 12v, or Amps

[@hurstysgarage]

Hey Nicholas... Sorry to hear that you're having troubles man. First thing I would do is make sure that you have your connections right in the first place, and that the ground panda red Power are not reversed. Then yes it has to be just a 12-volt, and then between 1 and 5 amps... Leaning more towards the 5, like mine was 3.5. Plus, sometimes those older Chargers go bad, and so that could be part of the problem too. Hopefully some of those suggestions help you out, and let me know if it worked out for you:-) Thanks for the comment buddy!

[@AnwarBuchoo]

I just tried my pioneer on a 12V 1.5A charger, and works fine. Thanks mate !

[@QBTO]

I'd go with a higher amp PSU at least 5amp Other issue is if you unplug the system you lose the radio memory

[@trussandleetoucheck1684]

Can I use a cordless battery from a power drill

[@hurstysgarage]

Not sure, but if you try it, and that works...please let me know, cause now you sparked my interest:-)

[@ripplechips5391]

I thought you need car speakers only ? Can you use any speakers ?

[@hurstysgarage]

Yeah, absolutely you can use any sticker that you want... The one that I'm using in the video it is from a regular home stereo system that was just a cheapie one!

[@desmondgreen1253]

Car batteries are dc won't it be better to run it on dc ?

[@rehn.architecture]

Hi is ACC and B+ is connected to each other ?

[@hurstysgarage]

Yes, both of them get mated together JRBL. Thanks for question, and let me know how it works out if you try this:-)

[@ustarecepusta]

Güzel

[@emanuelavila244]

Hello, I am kinda late but I don’t get how to do it, you messed up a lot and I didn’t understand how to do it could you help me?

[@hurstysgarage]

Sure partner, what part do you need help with:-)

[@CarlosGonzalez_753]

Does it shut off when you put the max volume

[@hurstysgarage]

No Carlos, mine has not.. have you experienced that with your build?

[@CarlosGonzalez_753]

@@hurstysgarage I had a 12 volt 2 amp adapter so it didn't had enough power so I bought another one with 5 amps and it's great it doesn't shut off

[@slaychild1]

what about adding an amp

[@Vedesh14]

The charger won't do anything to ham the current

[@MrDmack]

You Don't need a fuse.inbetween that Positive splice ???

[@hurstysgarage]

It would not hurt anything to do that...so sure...especially if you are really concerned about your head unit, and that would put your mind at ease. But not absolute necessity. You could also plug adapter into a surge protector outlet strip as an extra precaution too. But as always ***consult with a qualified electrician on matters like these. These videos are for entertainment purposes only***

[@yungmane7169]

When I did that it just keept going off and on and I have a Sony XAV-AX210 and it says 12v and ground says 10A but I am using a 12V and 5A

[@hurstysgarage]

Hey Cautious Very weird. First thing I would check is the connections to make sure they are well mated and wrapped. Did radio work before you tried this? Could be adapter too, which maybe a new one is in order. Gosh, I hope it works for you. Let me know how it goes:-)

[@yungmane7169]

@@hurstysgarage it works I think I have to wrap the wires good

[@hurstysgarage]

@@yungmane7169 love to hear it... and I made that mistake many many a times so don't think you're the only one if that's what really is wrong with it:-)

[@yungmane7169]

@@hurstysgarage when I put one of the wires on top of the radio it turns on but when I teke it off it goes off and on do I need to ground something?

[@hurstysgarage]

@@yungmane7169 you shouldn't need one from the adapter because one of the wires is already a ground cuz there's one positive and one negative wire... But, if that helps, then absolutely you can put the ground wire on there because that's not going to hurt anything:-)

[@superman0075]

Mine keeps turning on and off what is going on please help ✌

[@loganb5657]

What head unit is that

[@hurstysgarage]

Hey Logan...it is a BINIZE 7" Android double din head unit, and here is a link to it: www.amazon.com/Binize-Multimedia-AutoRadio-Navigation-Bluetooth/dp/B08L7NYMDR I like it, but it is definitely one of the cheaper options, and offers a decent platform on a budget.

[@fatboy2760]

My radio keeps shutting off when music comes on

[@CentorrianWillis-bc1bu]

It’s not working for me and the power supply keeps blinking

[@ajpeyres188]

Mine comes on for a few second than keeps shutting off

[@panduhgabriel8907]

hello , I also want to do that...is it not important to connect other wires that you didn't connect?

[@hurstysgarage]

Hey Panduh...great question! In this case, since the head unit will not be used in a "car" situation, no is the simplest answer. The other wires are non-applicable to this project. Thanks for comment 😀 👍 Let me know if you try it out!

[@panduhgabriel8907]

@@hurstysgarage okay I'll let you know

[@Angry-Little-Fish]

I’m trying to do this for my truck with a coyote swap 😂 because wiring is 3k

[@713tubeit]

Why is having a 12 v battery dangerous?

[@hurstysgarage]

Hey 713tubeit...great question! It's not dangerous necessarily if you are just storing it inside...the problem comes when you re-charge it. The practice of charging a car battery indoors is not entirely reliable or recommended. By charging your car battery at home or in a confined space, you might get the corrosive sulfuric acids stuck to your clothes and skin. Moreover, hydrogen build-up can cause the battery to explode. Thanks for comment 😀 👍

[@johndemore6402]

my wire stripper is a lighter 😂 and hot glue and/or shrink tube beats electrical tape🤗 every day

[@hurstysgarage]

LOL...Too true John...I have been known to use these "hacks" a few times in my projects also! Thanks for the comment man...did you try out this little "craft"? Anyways, THANKS FOR WATCHING and the little extra knowledge:-)

[@johndemore6402]

@@hurstysgarage no not yet but I will ill be buying a double din with Bluetooth/removable 11"screen and build it into a custom bedframe/head board with built in speakers apulstered in a pleather it's an idea I've been contemplating for about 2 years now lumber prices as they are supposed to be dropping in 6 to 8 months but I've also reclaimed lengths from a 10 ft pallet so I'm a 1/3 of the way I was thinking of a TV but this would be much better oh and thanks for vid big help😎😍💯

[@ethanstephens8293]

For some reason it's not working for me

[@hurstysgarage]

Were you able to get it Ethan...there are definelty so many variables sometimes that just make it a real head scratcher to why this does not work for some. It could be that the existing radio is no good, to the plug in, to a wire incorrectly mated. Hope you can figure it out...let me know:-)

[@dockterperoxide1768]

Dude cool video and all but seriously you got to get to the point more quickly. You're spending 3 minutes just telling me that I'm going to obviously use whatever I normally use to strip wires. This video should have been like 4 minutes long at the max. I'm pretty sure you literally described what a speaker was at one point. We get it. I promise. Not saying this to hurt, only to help.

[@hurstysgarage]

Yeah, one of my first videos...and I still SUCK at doing these🤣 I do appreciate input, and thanks for watching!:-)

[@braydennn07]

im 13, i tried this, and the radio blew up

[@BongsTrey-kx7uv]

Yooh you so taking time explaining just do the work brue

[@rafaelcotto9284]

Talk tooooooooo much!!!

[@nickhunga2551]

I buy the following thankyou

[@CentorrianWillis-bc1bu]

It’s not working for me and the power supply keeps blinking