Hello brother can tell me about isf250 2014 first both light are working After 5_6 second light shut down anad first one too less then usely
@ImHere7622 жыл бұрын
Looks like the Depo headlights are out of stock, (stuck on a cargo ship) lol, Which other led headlight kit would you recommend? : 2007 Lexus is250
@PoorManMods2 жыл бұрын
Darnnn, you could try Vlands
@Iniki_3 жыл бұрын
2 questions: What brand led lights would fit. What type of harness is that. Thank you for this video, I'm looking into doing this for my GS 350.
@hachiback60183 жыл бұрын
Will you be posting a video of what the bulbs look like after. I am just curious what it would look like
@themeparktre48413 жыл бұрын
So I installed them and connected everything but the Daytime running light isn’t strong
@PoorManMods3 жыл бұрын
Its not very bright
@themeparktre48413 жыл бұрын
@@PoorManMods ohh okay
@ImHere7622 жыл бұрын
Can I cut the wires on the OEM plug and wire them the the new led bulb without pulling everything apart ?
@PoorManMods2 жыл бұрын
nope you need to remove the head light to remove the ballast and cut the wires to the ballast
@mattntk3 жыл бұрын
Do those bulbs fit with the oem cover, i mean it can be close easily ???
@akkshun062 жыл бұрын
Can you post link to correct fitting led bulbs?
@Sanjunimedia9 ай бұрын
Hello. What bulbs did you install of you remember? The link no longer goes to anything?
@PoorManMods9 ай бұрын
these are the exact bulbs I used, and they are OK. They have spade connectors on them which allow you to bypass the ballast amzn.to/48htLDm These are a newer LEDs bulb which look like they plug into the HID ballast connector if you dont want to eliminate it. But im sure you could cut the connector off and still by pass the ballast if you wanted to like i did amzn.to/41MTS2P
@s.f.66163 күн бұрын
Looks like neither link works. Do you have a link of current bulb that will work? Thanks
@p-riff3 жыл бұрын
Unique style racing’s website says the low beam is an h7, but you said h11 like the OE halogen from lexus. Can you confirm?
@PoorManMods3 жыл бұрын
I definitely installed h11 bulbs in the video
@p-riff3 жыл бұрын
@@PoorManMods ok thank you!
@ExtremeRecluse2 жыл бұрын
I have a 2007 ES350. The low beams have HID bulbs inside a rotating lamp (cornering). I don't have $1000 to spend on new assemblies. What options do I have?
@michaelboibodas3 жыл бұрын
So the Depot headlight doesn’t have an awful ballast? It comes with H11 bulbs or the LED bulbs? What is a H11 bulb? And will and LED bulb short out by dirt and deposits flying in from hairline cracks on Lens if I choose to wire an LED conversion kit?
@griffzillagarage Жыл бұрын
When you bypass the ballast does the auto leveling set a code and give a warning on the dash? Also, do these bulbs come with the harness that has the power and ground leads? Thanks. Great job on the video.
@Daniel-gi1cy Жыл бұрын
I heard that you have to remove the fuse for that under the dash so it dows not throw a code
@griffzillagarage Жыл бұрын
@@Daniel-gi1cy I guess we will find out soon. I ordered a set. Will post a video to my channel on installation.
@zyuranger75563 жыл бұрын
That link to LED Bulbs are not the same ones you installed on ur car
@PoorManMods3 жыл бұрын
I know, i couldn't find the EXACT bulbs
@gsxellence Жыл бұрын
Wow you've really upgraded from b15 to beast. Proud of you 👍😁
@PoorManMods Жыл бұрын
Thank you!! The b15 was a good stepping stone
@gsxellence Жыл бұрын
@@PoorManMods I hope you get another one
@justinkredible33 Жыл бұрын
Will this bypass method work for 2006 Lexus GS300? I Fuggin hate this HID Ballast BS 😡 😤
@PoorManMods Жыл бұрын
I cant say for sure since i never opened that car up, but i would imagine it would be extremely similar.
@henrybauer296 Жыл бұрын
You do realize the reason why your headlights keep killing the ballasts is because you are getting water in the headlight. It’s a well known problem with just about every second Gen Lexus IS 2006-2013. The most common leak comes from the upper tab, it cracks and then water gets in to your headlight and the ballast sits on the bottom so it gets ruined.
@dwindeyer Жыл бұрын
The water is going to kill the LED light as well eventually
@ShafinMH2 жыл бұрын
Hello, What is the difference between D2S D2R vs D4S D4R? I have a 2007 Lexus IS250, which one should I order for low beam headlights? Thanks
@adriananzano2292 Жыл бұрын
S is for projectors, R is for reflectors. D2 runs at higher voltage, D4 runs at lower voltage and does not contain mercury. So while a D4S bulb will fit in a D2S headlight, they are not electrically compatible due to the lower voltage of D4S.
@ifoxino Жыл бұрын
hi thanks for video, i have lexus is 220d year 2006 and xenon lights. will this headlight work on my IS? thanks
@PoorManMods Жыл бұрын
It should
@richanderson2524 Жыл бұрын
Do you know if the led bulbs will fit a 2010 es 350. Also, the link to the bulbs doesnt look like the ones you have in the video
@ECYITS Жыл бұрын
You’d be better off just upgrading the whole headlight housing brother
@tomm.7632 Жыл бұрын
Just installed LASFIT LAplusD2 bulbs in a 2010 IS250 Convertible . (The original bulb was an HID D4S bulb. )They come with a pigtail so if you have to replace them you do not have to pull the head lights off (or the Bumper) They are very bright , I spun the bulb so the beam was up and down not side to side seemed like a better light beam . the pins on the Lasfit bulb connectors were long and went right into the original ballast connector. I taped them up really good to make sure they would not come out. Also the ballast plug for the original bulb is bulky and could bounce around. So I didn't want it to bounce around so I used the foam the led bulbs came in and secured them with the foam out of the way.
@4859carcar Жыл бұрын
any problems with beam pattern or brightness after you installed? I installed a similar LED bulb in my IS250 headlights, everyone was telling me to position the beam side to side but the beam looks horrible and narrow, maybe adjusting it to up and down like you said might fix my problem
@tomm.7632 Жыл бұрын
@@4859carcar We made ours go up and down beam I once the are in the head light it is hard to adjust so we turned them both ways sideways and up and down the up and down sea med to be the better beak
@ImHere7623 жыл бұрын
Hey quick question, my 2007 is250 ballast is burnt out too. I bought the Bulbs in your description 👍🏻. Do I have to remove the whole light assembly to get accession the ballast power wires for the new led lit ?
@PoorManMods3 жыл бұрын
yes unfortunately the bumper then the headlight have to come off
@HasounGH Жыл бұрын
Hi man, I’ve been searching for good explanations for replacing hid to led and you are probably the best, i just want to confirm that if i pass by ballast it may throw an error and AFS won’t work in this case. I have aurion2009 similar to Lexus
@PoorManMods Жыл бұрын
Yeah bypassing the ballast throws a code, I removed the fuse for the auto leveling system
@HasounGH9 ай бұрын
Eventually I did the upgrade myself, I have aurion2009 similar to lexus on your video, my heart was racing until I turn on my car and the LED works perfectly!!! Yet there is no errors like afs or anything on dashboard! No mechanic was interested for this work !! It took me about 5 hours and I really appreciate your knowledge and precise explanation ❤
@dqricardo19213 жыл бұрын
Did you do a video with Marty Motoring on installing Vland headlights on the Lexus Is? I can’t find it but I swear i seen it ages ago
@PoorManMods3 жыл бұрын
Yeah the video is on his channel
@ElSheepodoggo Жыл бұрын
Thank you so much for the vid. I do wonder if this will preserve the AFS.
@PoorManMods Жыл бұрын
You're welcome, I think you need to add resistors to retain the AFS, the LEDs draw way less current and the car thinks the headlights are off/dead. I removed the fuse for the system
@scribbles652 жыл бұрын
Hey Freddy, after purchasing these lights I cannot get the DRL or high beams to work. I have it connected to the battery. What am I missing and how can I test the harness fuse? Any ideas? Wiring is not my strong suit.
@PoorManMods2 жыл бұрын
Marty's video might be helpful to you kzbin.info/www/bejne/hJrIf5VuYrB_eKM
@scribbles652 жыл бұрын
@@PoorManMods Yeah, that's pretty much the video I was referencing. I should have been clearer. What is the instrument you used to provide power to test the high beams? I'm thinking of taking everything apart and re-installing again.
@abiliobaulane52453 жыл бұрын
Have video before in night?
@ImHere7623 жыл бұрын
*led kit
@themeparktre48413 жыл бұрын
I just purchased these how are they holding up if you mind me asking?
@PoorManMods3 жыл бұрын
So far so good
@themeparktre48413 жыл бұрын
@@PoorManMods good I heard people having issues with Version 1 so I see they improved Version 2