How to correctly update the Firmware DJI Mic in 1 min

In this tutorial I will show you how to update the firmware of the DJI Mic wireless microphone system.
The process to update the DJI Mic firmware is super easy.
The only things you need to perform the firmware upgrade are the :
1. DJI Mic system with the DJI Mic Transmitters and the DJI Mic Receivers
2. USB C cable
3. A computer to download the firmware files from DJI webiste.
🔴 SUBSCRIBE to THIS Creator channel: geni.us/MK-creator
🔴 SUBSCRIBE to my Tech channel: geni.us/MK-Tech
🔴 SUBSCRIBE to my Vlog: geni.us/mk-vlog
=============================
🔗 LINKS
=============================
- SPECIFIC GEAR HIGHLIGHTED IN THIS VIDEO -
DJI Mic: geni.us/dji_mic
My favorite Lavalier mic: geni.us/rode-lav2
- ALL MY GEAR and EQUIPMENT -
All my equipment, gear, etc. can be found here:
Kit.co: geni.us/kit-mats-kellerman
*As an Amazon Associate, I earn a small commission from qualifying purchases. Below you will find links that may be Amazon affiliate links. Above links may be affiliate links.
=============================
SOCIAL MEDIA
=============================
Join me on Instagram: / matskellerman
=============================
🕑 TIME STAMPS
=============================
0:00 - Intro
0:23 - Check the current Firmware version
1:23 - How to download new firmware DJI Mic
1:37 - How to update the firmware of DJI Mic Receiver
2:26 - How to update the firmware of DJI Mic Transmitters
3:10 - Verify updated firmware

[@MK-Creator]

My full beginners tutorial can be found here: kzbin.info/www/bejne/ioXLn4OlZct6n80

[@backtobasicswithCathy]

Hi MK, I have a brand new dji MIC (1 TX + 1 RX) and the screen on the receiver seems to be frozen on the set up (language). I have spent hours turning it off, on etc. I have watched your videos and now have downloaded the firmware files to my Mac but my Mac won't open the files. I get a screen saying it is an unsupported format. The screen is completely unresponsive to any touch at all. Can you help me please?

[@yahudimajnoon]

It seems only @MK-Creator is able to make us see & understand how things must be done & he explaine it in a easy way no sling slang strait to the point,thanks to u i updated the firmware of my beloved mic2…thank you🙏 for that

[@mshea5906]

LOVE getting straight to the point. Super clear instructions! Bravo!

[@MK-Creator]

Thank you 😊

[@simonyapp]

so helpful, thanks!

[@sekaf4125]

Excellent tutorial. Worked to perfection. My new laptop was so fast I didn't think it worked...like instantly...Bang!!!

[@MK-Creator]

Amazing! Thanks for sharing! 😃👍

[@niallgardens]

Thanks! Really useful video and was exactly what I was looking for! 👍

[@MK-Creator]

Woow that’s awesome! Welcome back any time!!

[@annac3514]

Thank you!!! Simple, to the point and it worked. Best tutorial!

[@MK-Creator]

So happy that it solved your issues and answered your questions. Welcome back at any time! 😃👍

[@lindaleman1120]

Another great vid and super helpful in saving me time. Thank you!!!

[@MK-Creator]

Amazing! 😃👍

[@alanoakley3242]

I've only done one update but I believe the transmitters' LED alternates between red and green while the update is being applied. Perhaps the latest update happened too quickly to notice this but it was certainly evident when updating from the original firmware to 02.00.72.80. Also, I would advise not to put the receiver back in the case until both transmitters have also been updated (or vice versa). Some of the issues users have had post-update may be because they have allowed their devices to pair while their firmware versions are different.

[@abuseinsights1]

I appreciate you. This is really helps and very simple to follow.

[@MK-Creator]

That was so nice of you sharing! 😃👍 welcome back many many more times!

[@amirneshati4839]

Very well done, thank you!

[@sreynoldsrealestate]

Brilliant video, your explanation made it super easy - thank you

[@MK-Creator]

Thanks Stuart! Nice to have you around. Welcome back many more times!

[@shaunthedrone]

Good to know, many thanks for sharing the info :)

[@MK-Creator]

There was so many asking me so I had to drop a video about it! Thanks 🙏

[@flapjackbeans]

Great Video I have subscribed thanks

[@MK-Creator]

Hello and welcome! 🥳👍

[@Replay_1988]

Subscribed, you have a great channel. Thank you for to info

[@MK-Creator]

Thank you so much too! You are so welcome! 😃

[@kobertrains]

Hey I got a question, when I plug my DJI Reciver or Transmitter, My PC isn't able to recognize my device anymore and doesn't pop up. I bought this no later than a month ago & condition is still good as new..this only recently started to happen as of last week as far as not being able to transfer my audio files.

[@nigelhenry1792]

Great info but not being 21 anymore it has taken me ages to find good instructions but .... even then it is not simple and not DJI info simple, its messy to down load info not clear from DJI, AND TAKES AN EXPERT LIKE YOU TO help EXPLAIN IT. Stunning mic system but not the usual DJI intuitive easy to follow instructions.

[@MK-Creator]

Totally agree with you. And thank you 😃👍

[@tylerthecreative]

Great video thank you for this easy-to-follow explanation. Would this help the issue I was receiving of the audio sporadically skipping?

[@MK-Creator]

Thank you! Possibly… many issues are solved with the updates 😃👍🏼

[@Al-Kwadrone]

Great job! Is it possible to do the update with an iPhone? Cheers, mate

[@giftwizards202]

Hii acutely my charging case not yet charging .. that total showing on full charger but transmitter show on not charging anything solution..?

[@EastyUK]

Nice vid, weird they don’t just do it when you plug in the rcvr to a phone.

[@MK-Creator]

I know. Like the new Røde Wireless Me. Just plug it in and update.

[@varantzmedia]

I'm assuming DJI Mic 2 has the same update mechanism, but it's such an old school way of doing things. They've spent all that effort designing the perfect mic with attention to details but gave up on the firmware part. It should update like AirPods does without you noticing at all.

[@MK-Creator]

Correct. The Mic 2 is the exact same way. No new is available yet tho.

[@probablyfigureitout1671]

My transmitter isn't appearing on my PC like the receiver does. I can't update, copy audio files, etc. Any one else have the same issue? I tried formatting, factory reset on the receiver, etc.

[@ArturMomot]

👍👍👍

[@FBCLSChurch]

On Mac, receivers and transmitter automatically reconnected after ejecting. If this happens to you, don't worry because you already finished moving the update file to the device, and you should be ok. Receivers: download rx file. Plug receiver into the computer. Copy/paste or drag/drop rx file into your receiver's folder. Eject the receiver. Unplug it (it may try to reconnect - not a problem - just unplug it in that situation). Turn on the receiver. Update will start, lights will alternate from red to green until finished. Transmitter: download tx file. Plug transmitter into the computer. Copy/paste or drag/drop rx file into your receiver's folder. Eject the receiver. Unplug it (it may try to reconnect - not a problem - just unplug it in that situation). Turn on the transmitter. Update will start, screen will say it is updating until it is done. Confirm language date, and time.

[@nirvau69]

didn't work for me =/

[@mattk5020]

Can you use smartphone to download firmware updates??

[@MK-Creator]

Unfortunately not. There is no DJI app to the smartphone for updating the firmware. Has to be connected to a computer. I don’t know if it’s working with an android device tho if you could download the firmware and then transfer the file. The update is not made from any device, you just need to be able to transfer the firmware file to the DJI unit.

[@macrayers]

Update is here for "turning off the Status LED on the Mics" :)

[@MK-Creator]

Jup, finally! #dji must have seen my video 😂👍