HOW TO COVER LIGHT ON RAY BAN META GLASSES “It Works”

[@stkyfngez]

Great video, can you please do a follow up, going through each step?

[@R1znl3r]

Thank you for the guidance. Could you please confirm if this method still works in 2024? I apologize if this is a basic question, but I am unsure whether any firmware updates for the smart glasses have rendered this method ineffective, as I have not yet purchased them.

[@idontknow93960]

Did you link the stickers?

[@two20john]

Best one I've heard yet.

[@teamfamous2006]

🤣🤣🤣

[@DaN-w1h2k]

What size stickers do you use? The blackout stickers I have are too big.

[@Bittersweet_TA]

Does it work during the night time? I assume the light dimmer causes the light sensor to just be black, while the camera still catches light, not making it work.

[@juggalocpirate]

Some dude said you can just completely black it out with black electrical tape and just cover the camera lens for the first second of recording and it worked for me!

[@hkchris1]

But you can’t take pictures

[@TheIntendedOutcome]

Thanks! This seems like an interesting workaround and the best one on the internet so far!

[@HSterlingCross]

You can also use two stickers and then put finger over camera, start video, remove finger and it works.

[@Black____]

Why the worry over a light alerting people that you're recording 🤔

[@machychulo]

​@@Black____If you are getting robbed and you want to record the thief, you don't want to let him know you will keep a videos on your glasses

[@josetorres6735]

Thought I should share this. So did this with the stickers he recommended in the video. Did the little hole I put the sticker and in addition a put some gorilla glue on top of the sticker with a Qtip to keep the sticker sturdy and make it shiny and it came out perfect is like there is no sticker there 💪

[@pimpdaddy7710]

You put the glue between the two stickers or on top of the second sticker?

[@stkyfngez]

You should make a video

[@josetorres6735]

@pimpdaddy7710 Sorry for the delay guys didn't even see the comments the gorilla glue I put on top of sticker once the sticker is applied works great. BUT the only issue I found is that in low light condition the it won't work due to not enough lighting going in to the sensor

[@josetorres6735]

@stkyfngez Sorry for the delay guys didn't even see the comments the gorilla glue I put on top of sticker once the sticker is applied works great. BUT the only issue I found is that in low light condition the it won't work due to not enough lighting going in to the sensor

[@slickgambles]

Can you post link to the sheets you bought?

[@caf0011]

How did you tint it in addition to the stickers?

[@BoyleFarms]

Put the tint sticker first then the black out sticker with pin hole on top of that

[@caf0011]

@@BoyleFarms the tint one has a hole in it as well correct?

[@BoyleFarms]

⁠@@caf0011no only the black out

[@edgargdll]

Fiest thanks for postíng this, i was looking all over the place, this is a great improvement The problem that i have is that it is not consistent,aome times it work sometimes it does not(with the hole that small)

[@TheAxtonman]

Got to make the whole a lil bit bigger

[@HSterlingCross]

You can double up two stickers, and then when starting a video, hold your finger over the camera for a second and it'll work. Only downside is, can't take photos.

[@G187-k6f]

Do you can open instgarm live?​

[@MrBobkeenan]

I tried something like this and it works fine in well lit areas but go into a dimly lit room and it will not work for me. I think there is a sensor somewhere in that dark ring around the LED. if I knew where it was I could cover it all but the area of the sensor and it would work in any light condition.

[@sakurarozu]

Can you make a guide on how big the hole needs to be? I used a push pin

[@MRSCOTTZD]

I thumb tack size

[@Ray888z]

2 black out sticks or one? What size is thumbtack hole? 80% ? Confusing

[@lefleur3840]

80% tint blackout stickers

[@rickyhoffa4781]

What happens if you use just blackout only

[@AmienPhillips]

Have you checked if this still works after a firmware update?

[@theclarkmanman]

any updates on this, still working?

[@markpizzetulla4510]

Any link for the stickers?

[@andrewcoleofficial]

I second this

[@Shanahan126]

does this method still work for Meta Rayban glasses?

[@TheAxtonman]

This method doesn't work, I bought 80 percent blackout, and it detects it when glasses are on, any other ways?

[@MrEddieNunez]

Did you do the thumbtack hole?

[@TheAxtonman]

No, I thought that was only for the second layer @@MrEddieNunez

[@dawgwood]

Did it work after putting the hole in both stickers?

[@BoyleFarms]

Birllaid Light Blocking Stickers, LED Light Dimming Stickers for Routers and Other Electronic Appliances (Black and Dimming) a.co/d/026N1QM It works on mine. But my tint says 60-80% maybe that’s the difference?

[@MrEddieNunez]

@@BoyleFarms I received this exact sticker pack and didn’t work for me. If I make the hole very large on the sticker, then yes it works but kind of defeats the purpose. Small thumbtack hole won’t work.

[@jerseyboym5]

Will this work for photos?

[@charlescharles6191]

amazon link, please?

[@BoyleFarms]

Birllaid Light Blocking Stickers, LED Light Dimming Stickers for Routers and Other Electronic Appliances (Black and Dimming) a.co/d/026N1QM

[@G187-k6f]

Do you can open instgarm live with this trick?

[@MoroccanRap7]

This is the video that i look for a while , can you please do a another video but do only the black tape , 100 % black and do one small hall with a needle , and see if this work , me too my child have anxity with the flash light of the camera and he cant be so normal , i dont know if i buy it or no , any way thank you

[@BoyleFarms]

That works. The hole has to be perfectly in the middle. May take a few times adjusting it

[@thierryhaimmsika3038]

​@@BoyleFarms I found a solution also for picture. Can you please help me to "fine tuning" it?

[@reacttechreviews]

We need more details. Links and step-by-step.

[@Olhaesseclipee]

That is a way to record over 60 seconds?

[@aerondean]

can someone link the stickers he used

[@ItsNoe]

I tired it. It doesn’t work with the 80% tint. It works with the 50% tint but not in dark places.

[@Usuario-bh4mh]

There is no other methods to root the glasses from the phone or hack them to turn off the lights? Instead of doing physical things to the glasses?

[@shishio8216]

from dozens of review i watched, there isn't one

[@Usuario-bh4mh]

@@shishio8216 ok thanks.

[@dontwhine1]

Not right now. But I feel like you can disable it through the coding in the software side.

[@ThrottleAddiction]

I like that one

[@warrenmarciano3481]

I try is not working

[@exoprasta]

You can still see it pulsating tho…

[@CYBERCATXO]

Someone please try burning the detector or led using laser. I'm not buying till this BS get taken care of

[@Texxmeks]

Same

[@Matanumi]

Youll kill recording on your model if you do this

[@CYBERCATXO]

@@Matanumi Have you tried? How do you know

[@shishio8216]

I saw someone on youtube burned the led, the camera stopped working

[@CYBERCATXO]

@@shishio8216 How did he burn it

[@maxpayne5546]

i can still see the light flashing , it is clearly seen in the video , not a perfect solution unfortunately

[@Reaver3214]

Because you're looking for the light. It's like saying a sniper camo isn't working because you can clearly see it when you look for it.

[@mdyzward8553]

Can’t you just cover the cam with your finger?

[@BoyleFarms]

@@mdyzward8553 if anything covers the light it won’t allow you to take a pic

[@NPC4our2wenty]

Does not work people

[@Matanumi]

It works but not very well some. Pictures wont go through

[@NPC4our2wenty]

@@Matanumi not worth it all stick to the generation 1 stories

[@DaveDel]

@@NPC4our2wentywhat is generation 1?

[@NPC4our2wenty]

@@DaveDel Rayban Stories are gen 1 the Metas are gen 2

[@JohnnyPerth]

Truth

[@jaytheactor555]

It does not work at all. The glasses will tell you to remove it

[@BoyleFarms]

Have you tried it? It must have a thumbtack size hole placed perfectly in the middle

[@jaytheactor555]

@@BoyleFarms oh yea! Forgot that step 😅 thanks bro

[@VNTG-cl5rj]

Did it work ?

[@jaytheactor555]

@@VNTG-cl5rj yes but you will have to make the hole double the size

[@NICE-ww9bl]

Does the ai feature work with the lights off

[@retro93277]

So where is the link

[@AcademyOfApertureHQ]

Try this one: amzn.to/3MuSg6S

[@CollegeIsASetup]

I'm confused. pls do a video step by step.

[@FullMoon7]

I wonder what are the hidden reasons you want no one to know you are recording 😂