Such a thorough video about using epoxy resin on mosaic work. I have been working in mosaics for about 6 years and just created a piece that will look much better with a resin coating. Your video is the best in explaining the process and takes away some of the "fear". Thank you!
@JulieWeilbacher Жыл бұрын
Hi Janie! Thanks for your kind words!😊 It's great to hear you got value from my video. You said it best, let's remove the fear of working with resin. Keep creating and I'm so glad you're here!🔥
@ligiafernandes55583 жыл бұрын
Thank you for this video. Loved it! I would like to see how you resin projects without edges to contain the resin.
@JulieWeilbacher3 жыл бұрын
Ligia, thank you so much! I'm glad you enjoyed it! Great request....I'll add it to the list! I'm glad you're here! Keep creating!
@nixcreations59323 жыл бұрын
Thank you, you have taught me allot, going to be applying resin on a guitar that's done in a type of mosaic. Holding thumbs it comes out amazing 😁
@JulieWeilbacher3 жыл бұрын
Hi Nicita, I'm so glad you enjoyed the video and got some value from it. Your project sounds amazing!! I'd love to see it. Can you tag me on Instagram when you get it all done (@julieweilbacher)? Keep creating and I'm glad you're here!
@jamibouchie61443 жыл бұрын
I really appreciate you sharing your expertise and creativity.
@JulieWeilbacher3 жыл бұрын
Jami, thanks so much for watching! Glad you're here and got some value from it. Keep creating!
@stephaniecosenza32413 жыл бұрын
Thank you so much Julie! I’ve made a few micro mosaic necklaces and I wanted to try resin but didn’t have the nerve. Your video has given me the tools and confidence to just do it!
@JulieWeilbacher3 жыл бұрын
Hi Stephanie! That's fantastic to hear! YAY!! Just remember to use equal parts, mix slowly, and pour carefully. You got this!! Keep creating and I'm glad you're here!
@dodojack10453 жыл бұрын
Never knew about resin. Just fantastic. Must try it. Thank you.
@JulieWeilbacher3 жыл бұрын
Hi Dodo Jack104! Yes, resin is pretty fun stuff....a bit messy, but wow! what a finished product. Give it a whirl! Glad you're here!
@sandykeene4 ай бұрын
Thank you julie! You did a very nice job of explaining how to use resin!!! My project is that I took glass shards and poured it onto my Mosaic as the background. Problem I had was how do I get all these glass shards off without them going everywhere. A suggestion was to pour resin on top of it so it would cause it to stick and then also seal it. Do you have thoughts on this?
@janinedelouw8077 Жыл бұрын
I’ve subscribed and here on this journey that I’m on, Thanks again Your dishes are absolutely amazing and your an amazing artist I’m so glad I came across your page
@JulieWeilbacher Жыл бұрын
Hi Janine! Thank you for your kind words. I'm thankful you're here!😊
@janmontarsi.-blendangles79603 жыл бұрын
I have used resin quite a bit in many projects. POI - the CO2 from the butane lighter , Small hand torch, and even exhaling directed through a straw all work well it is the CO2 that causes the bubbles to rise and pop much more than the breeze from blowing or heat from hair dryer.
@JulieWeilbacher3 жыл бұрын
Agreed! What sort of projects have you used resin on? It's fascinating stuff to work with!
@24lunalovegood2 жыл бұрын
Thanks Julie! I've used epoxy resin but not on mosaics. This was very helpful even for other resin projects. I especially want to get that mixing cup!
@JulieWeilbacher2 жыл бұрын
Hi Barbara! Great to hear you enjoyed the video! What projects do you use with resin? The mixing cups are so handy! Keep creating and I'm so glad you're here!🔥
@SoulOfNatureАй бұрын
Hi Julie, I learned a lot from this video. I have mosaiced a board game, and I want to use resin on it so that aside from hanging as art, it would actually be usable. I know, crazy. 🤪 So obviously it doesn’t have an edge. Will this be possible?
@renatasroslak17302 жыл бұрын
I love your videos, learning a lot ,for sure will use resin for my mosaics
@JulieWeilbacher2 жыл бұрын
Hi Renata! Awwww, thanks so much!😊 It's great to hear you're enjoying my videos. Resin is such a fun look to finish off mosaic art. Have fun! Keep creating and I'm so glad you're here!🔥
@dreadrogue5493 жыл бұрын
That looks so nice!
@JulieWeilbacher3 жыл бұрын
Thanks for checking it out Buddy!
@amisen993 жыл бұрын
Hi Julie, Thanks for this wonderful video. I had a question - is it possible to just use resin and no grout? So pour the resin and let it fill the gaps as well as create a glossy top layer?
@JulieWeilbacher3 жыл бұрын
Hi Ami! I'm so glad you enjoyed the video. Yes, you can definitely skip the grout and go right to the resin, you'll just be missing the groutline aesthetically. If you eliminate the groutline, you could put your pieces really close/touching. I might have to try one of these too! Keep creating and I'm glad you're here!
@jamesalexander23462 жыл бұрын
@@JulieWeilbacher don’t be lazy julie. Grout it.
@kkacz77835 ай бұрын
I have a large (3’ X 3’) mosaic piece I just completed. It is fully framed in metal as it was intended to be hung on an outside wall. I am wanting to now to fully encase it in epoxy resin, build a mold to make the square into a round shape for a coffee table. My questions are: does the epoxy resin react with grout? I have large areas of grout and I am concerned with it mixing with the epoxy and making it look cloudy. The grout, although fairly thick in some areas, is fully cured. Should I seal the entire piece before pouring the epoxy? I am fine with starting with a thinner layer of epoxy and slowly building up to approximately 4 inches overall depth. The reason being, the piece has multiple levels of glass/ceramic providing dimension through it. Second question is will there be a problem with the epoxy and the metal frame? Any help would be appreciated. I have been working on this project for 3 years and would really not want to destroy it.
@prernalaw83433 жыл бұрын
Thank you Julie fir these wonderful videos. They are so helpful. I do a lot of mosaic table tops. What I wanted to ask you is… is it advisable to pour epoxy on the mosaic which is grouted to make it more secure. I always feel that some tiles, especially from the table edge tend to come off. How to secure the rules completely. I would really appreciate your advice. Thank you in advance.
@JulieWeilbacher3 жыл бұрын
Hi Prerna! Great to hear you're enjoying the videos. You can definitely pour resin on your tabletops, in fact they make a specific resin for tabletops that cures harder than the average resin. But let's go back a few steps....if you have pieces that are coming loose there are a few things to check first -- and then maybe you don't have to apply resin at all. (1) You want to make sure your substrate is prepped correctly. (2) You also want to make sure you're using the right adhesive for the tesserae you're working with, AND, (3) you're using enough adhesive to secure your pieces. Keep creating and I'm glad you're here!
@marynetherton9654 Жыл бұрын
I included some crushed sea shells in a mosaic and prefer to use epoxy resin instead of grout. More experienced mosaic artists have advised against it because of issues with yellowing. It is a bistro table top and is a wedding gift. I think grout will ruin the beautiful textures. What do you think? I would really value your opinion. Thanks
@rupashukla59163 жыл бұрын
Very helpful for a novice like me!!!
@JulieWeilbacher3 жыл бұрын
Thanks so much Rupa! Glad you're here and found it helpful.
@davidhill12203 жыл бұрын
Thank you!! Patricia
@JulieWeilbacher3 жыл бұрын
Hi Patricia! I'm glad you enjoyed it. Have you worked with resin before? Glad you're here! Keep creating!
@loritayoshisato9599 Жыл бұрын
Thank you, looking forward to trying this!
@JulieWeilbacher Жыл бұрын
Hi there! You're welcome! Thank you for watching.😊 I'm glad you enjoyed the video. Keep creating and I'm thankful you're here!🔥
@janinedelouw8077 Жыл бұрын
Thank you so much for sharing all this very very very well explained, amazing directions for us viewers. You explained it so well that I’m not afraid too try it and I’m actually going too make something with it! Your invaluable advice and inspiration of your gorgeous work has sparked my creative switch and I’m going to buy epoxy tomorrow 🎉 Would epoxy be something for a floor mosaic? Shower floor, countertop and stairwell is what’s going to be mosaic in my house. I’m assuming epoxy would be more slippery then a grout sealer? Epoxy made your gorgeous work so amazing 💖💖💖
@JulieWeilbacher Жыл бұрын
Hi Janine! It's great to hear you enjoyed the video and are ready to start with epoxy!✨ For floors you'll want to look specifically for floor epoxy. This is where I buy mine: amzn.to/3Tl4i5g. Keep creating and I'm so glad you're here!🔥
@vickikgibson9470 Жыл бұрын
Hi . I have an important question. I covered some mosaic tiles for a couple of outside tables. They looked good and seemed to be ok until winter. Now the resin has cracked are lifting in places. Like you I did a layer at a time. And process as you. I also used a resin for exterior use. I'm not sure what I should do but try and peal off the resin and start again? I sure don't want to do this every spring. Is there a way to have the resin stay clear and un cracked. They are very beautiful pieces of work and I woykd hate to loose these. Otherwise I guess I have to put an acric top over them. I'm a display artist for a nature centre abd would like to resolve this problem. We even had special bases to put the mosaic tile disks into. The tops are to remain outside. We get -30 to 95 + here in Canada.
@mrinalinipillay65012 жыл бұрын
Julie!! A lovely video yet again 😊 I just have one question, will the surface of the ring dish on which there is resin is not get scratched?
@JulieWeilbacher2 жыл бұрын
Hi Mrinalini! Yes, I'm sure the surface could get scratched over time if you aren't careful, so I wouldn't put 'pointy' jewelry on it. Keep creating and I'm so glad you're here!🔥
@Baaaaa942 жыл бұрын
Thank you for the great video! I have a question. I just created a mosaic tabletop and it is unleveled as the pieces I used are from broken plates and are not completely flat. I thought about using resin to level up the top but I am afraid it will get dirty easily. Do you have any advice? This table will be in the balcony with some plants on it so it is not the end of the world to keep it pretty but unleveled (if you think the resin might get dirty easily or will have sun damage). Thank you!
@JulieWeilbacher2 жыл бұрын
Hi Maya! Your table sounds fun!! Most resins do yellow when exposed to UV light, excessive water, and high temperatures. If it was my table, I'd have a piece of glass cut to the exact measurements of the tabletop and would rest it on top of the mosaic. Because it's uneven due to the tesserae I would add clear 'rubber bumpers' in lower spots. If that makes sense. Keep creating and I'm so glad you're here! 🔥
@Baaaaa942 жыл бұрын
@@JulieWeilbacher thank you so much for your reply!
@cfessler36 ай бұрын
I'm not sure how to apply resin to my mosaic tile that I'm going to use as part of my backsplash tiles. The main tile is approx 9.5" x 11". When completed, the backsplashed area should measure approx 14" high x 29" wide. I don't know how to send a picture of my project to you but it's a picture tile of an Adobe hut with cactus, sand, sky, etc. This is the first time I've worked with glass so I'm not sure exactly what to do and how to do it. The mosaic itself is very uneven because I'm using crushed glass. Any help would be appreciated.
@lisabouman-blank17563 жыл бұрын
Hi great video. Do you have advice on how to edge your mosaic piece so that the resin does not flow over the sides and the piece is well levelled?
@JulieWeilbacher3 жыл бұрын
Thanks so much Lisa! I'm glad you liked it. You have a couple options. The first option is to apply painter's tape to your edge which will keep the resin in the desired area of your piece. The second option would be to 'break the tension' by going over the border of your surface with resin then pour little by little within that area spreading the resin gently with a wood craft stick. Freshly mixed resin will spread quickly and freely, so it's better to pour little by little so you can try to control it. As for keeping your item level, I would suggest getting a level and laying it on the table you're working on first, and then on top of your piece. Have fun!
@iammaryjosephine3 жыл бұрын
Thank you for this video. 😊 I'm researching ways to not grout or use a clear glass grout. I create intricate mosaic jewelry and art using stained glass tiles. I feel that grouting takes away from the beauty of the glass. What do you think of just using the epoxy resin, no grout?!
@JulieWeilbacher3 жыл бұрын
Hi Mary Josephine! I've used resin on mosaic pendants which weren't grouted. My pieces of glass were flush against each other. It worked just fine. But by not grouting you do lose a bit of the detailing that grout so nicely provides. If you're pieces aren't touching/very close to each other, then your tesserae could look like they're floating in the resin. It's a fun look, but it may not be the look you were hoping for. Keep creating and I'm glad you're here!
@pend63212 жыл бұрын
I love watching your videos, I'm learning a lot. My question is how do you use the apoxy resin on your project when you have no edge to keep it from flowing off?
@JulieWeilbacher2 жыл бұрын
Hi P End! Thanks for your kind words.😊 Great to hear you're enjoying my videos. It's tricky to add resin to mosaics that have no edge or lip. I put your video request on the list. Stay tuned! Keep creating and I'm glad you're here!🙌
@mrinalinipillay65012 жыл бұрын
Julie !! Thank u, what a lovely well explained tutorial on resin . Just one question though, if we keep or rings or other jewellery on a resin surface , won’t the surface get scratched at times? Thank you once again ☺️
@JulieWeilbacher2 жыл бұрын
Hi Mrinalini! Awwww, thanks for your kind words. Great to hear you enjoyed the video.😊 Yes, I'm sure the surface could get scratched over time, so I wouldn't put 'pointy' jewelry on it. Keep creating and I'm so glad you're here!🔥
@TroyMangante-jv2gf11 ай бұрын
Hi, I was thinking of clear epoxying over a table I made but it doesn't have an edge. How thin can you apply resin? Thank you.
@JulieWeilbacher11 ай бұрын
Hi Troy! I've applied thin and thick layers of resin to mosaic art. Some with an edge and most without. You're doing a table so you want the resin to be thick enough to cover the surface area but doesn't have to be a specific depth. The resin is quite hard once full cured. Just remember that resin is self-leveling so it spreads naturally and isn't self contained very easily. Tricky stuff. I would also make sure you use a resin specifically for tabletops, there's one listed below the video in the description. Sounds like a fun project! Keep creating and I'm glad you're here!⚡
@jillgat Жыл бұрын
Great video! I've been afraid to mess with resin so far. That "kit" isn't available on Amazon anymore. Do you know who might have it? Thanks!
@JulieWeilbacher Жыл бұрын
Hi Ava! I'm glad you liked the video. Resin is intimidating, but if you go slow, you'll be fine. Thanks for the heads-up....I updated the resin kit link in the description. Keep creating and I'm so glad you're here!🔥
@juliegilbert3307 Жыл бұрын
Thank you for making all of these videos. I'm so enamored with your skills and I like how you teach. I have never used resin but I want to put resin on several pieces that are tabletop but I have a few questions for prep before. Your mosaics look so clean before you added the resin. Do you use alcohol to clean tiles before you add resin and how long do you wait after cleaning the tiles one last time? It's so scary to know once I add the resin, I can't go back so I want them to look great before. On the pieces I am doing now (tabletops), I sealed the grout one day ago and the tiles don't look that clean bc they still have a bit of grout. Also, all of my table tops have tessera that are uneven so do I still follow the same steps even though the pieces are uneven?
@JulieWeilbacher Жыл бұрын
Hi Julie! Thanks for your kind words.😊 It's great to hear you're enjoying my videos and getting value from them. Before I added the resin I made sure to wipe off any grout dust with an old chip brush, and then if there's any grout haze you can clean off the tesserae with vinegar (clear) on a Q-tip. Avoid getting it on your grout. It dries rather quickly. The resin is self-leveling so you may need to add more resin to bring the surface of the resin above your uneven tesserae. What an exciting project! Enjoy! Keep creating and I'm so glad you're here!🔥
@esperanzagermosen45752 жыл бұрын
Love your videos.
@JulieWeilbacher2 жыл бұрын
Hi Esperanza! Awww, thanks so much!😊 It's great to hear you're enjoying my channel. Keep creating and I'm so glad you're here!🔥
@ShieAyla2 жыл бұрын
There's a tactic used to train horses they want to rush things, and go too fast before thinking first. It's called "Hurry up and wait." It's a mindset you enter the session with while addressing that issue. It's the mindset you teach the horse to use. Still let them hurry, but you're only hurrying to wait. "Hurry up and wait." It redirects the energy when you HAVE to go slow and be patient.
@JulieWeilbacher2 жыл бұрын
Hi ShieAyla! Love that!🏇 Hurry up and wait. As mosaic artists we do that a lot from time to time. Keep creating and I'm so glad you're here!🔥
@marlenemeechan2445 Жыл бұрын
I made a found things mosaic inside a frame (12X14?) using DAS to push in the uneven pieces large or flat. (buttons). I was considering epoxy to level it out. What do you think? Are there other products that would work?
@donnaschultz5446 Жыл бұрын
Hey Julie! Love your videos. I have applied epoxy to my mosaic garden table. It came out great, but I would like to make the epoxy scratchproof. Do you have any products that make your work more scratch resistant? Thanks!
@JulieWeilbacher Жыл бұрын
Hi Donna! They make an epoxy resin specifically for tables. I don't know of a product that you could put over your existing resin to make it more scratch-resistant.🤔
@maggiefrost7093 жыл бұрын
Thank you so much, I love your video's, I love the idea of resin, but I think you would need to experiment
@JulieWeilbacher3 жыл бұрын
Hi Maggie! Thanks for your kind words. Yes, resin is a really fun thing to add to mosaics. All that's required is patience when mixing it up. I'm glad you're here! Keep creating!
@wallyzeisig2 жыл бұрын
Yes, I use resin on all of my mosaics. I make little treasure boxes and house numbers.
@JulieWeilbacher2 жыл бұрын
Hi Wally! How do you keep the resin 'contained' on your edges? Or do you let it run down the sides? I appreciate your input. Keep creating and I'm so glad you're here!🙌
@andisklar19522 жыл бұрын
All of your videos are very helpful. Do you have to grout your mosaic before you put resin over? Also, I can't find the list of materials... I don't see the description
@JulieWeilbacher2 жыл бұрын
Hi Andrea! Thank you for your kind words. GREAT to hear you're enjoying my videos! You don't have to grout your mosaic before pouring resin over it. It's personal preference. For instance, pieces such as smalti mosaic have much closer/touching tesserae, and aren't traditionally grouted. For the materials list, it's under the video in the description. If you're on a mobile device, look under the video and there will be a down arrow to the right of the video title. Click that and it will expand the description and you can click 'more' to reveal the entire description which is where the materials list can be found. Keep creating and I'm so glad you're here!🔥
@PaulaPena-um6nf Жыл бұрын
We put wood craft, butterfly flower heart… and so forth glued mosaic in it. Pour cement onto tray then , made the mistake , put wood Piece on top. Didn’t realize, 🥴, smooth part would be the bottom… Now we want to fill in wood figure with the tile, with the grout. Then put epoxy on top to make nice and clear. My question is is that a good idea? And if we put the Apoxsee on is it going to stick to the plastic mold? Are we going to ruin the finish Around the edges once a rip off the plastic mold?
@JulieWeilbacher Жыл бұрын
Hi Paula! I’m not sure I understand what you did.🙈
@sandeepdhariwal12 жыл бұрын
Thanks for the informative videos, as usual. Can you please guide me through my first epoxy risen mosaic, I have a few questions in mind, can you help me understand... Is epoxy a good alternative to grouting?Since grouting never gives me a clean finish on my woodbase glass mosaics art Does that make sense to pour epoxy first, then lay the glass mosaics on it and use epoxy as glue base when it becomes tacky? What are the tips if I want to use colored epoxy risen but don't want it to stick to the glass mosaics?
@JulieWeilbacher2 жыл бұрын
Hi Sandeep! Epoxy can be an alternative to grouting, if that's the look you're going for. Epoxy is a very different look from grout. You can use epoxy as an adhesive. Epoxy is permanent. So once you pour it over the top it's there for good. Keep creating and I'm glad you're here!🔥
@lydvincecruz8242 жыл бұрын
Thanks for sharing..I appreciate it very much.Love to do one but with shells.Coul I use resin on shells by brushing it into the shells ,pls. Help.
@JulieWeilbacher2 жыл бұрын
Hi Lyd! Yes, resin works on all sorts of tesserae types, including shells.🙌
@cathleenparsons42762 жыл бұрын
Would a resin seal be good to use on a coaster ?
@JulieWeilbacher2 жыл бұрын
Hi Cathleen! Yes, you can use resin on a coaster. It just won't have the affect as a coaster with exposed grout where moisture has the ability to 'soak into' the mosaic, if you know what I mean. Keep creating and I'm so glad you're here!🔥
@hannahmeyerson16282 жыл бұрын
Do you have a video that shows how to epoxy a mosaic piece that does not have an edge? I made a cheese board, but it has uneven pieces and needs to be food safe.
@JulieWeilbacher2 жыл бұрын
Hi Hannah! I don't have a video on that yet, but your request is on the list! Keep creating and I'm so glad you're here! 🔥
@janetroughton20922 жыл бұрын
Could you expoxy a garden paver that has been mosaiced?
@JulieWeilbacher2 жыл бұрын
Hi Jane! I wouldn't. UV light causes resin to yellow over time. You might be able to find a marine-level resin but still, over time it's going to yellow, but perhaps not as fast as common 'craft' resins. A resin'd paver sounds so amazing though! Keep creating and I'm glad you're here!🙌
@suelutz574 Жыл бұрын
What brand resin do you use? If I am using resin over top of a large (2’x4’ foot) clay tile project will the resin act as glue to keep the tiles locked in?
@JulieWeilbacher Жыл бұрын
Hi Sue! You can view a list of everything I used in the video by clicking 'show more' under the video description. That list includes the resin. Keep creating and I'm so glad you're here!🔥
@suelutz574 Жыл бұрын
Thank you
@colleendavidson68492 жыл бұрын
I did a mosaic glass sink and want to put resin on it. Any suggestions for how to do that since the sink does not lie flat. Could I do a 1/4 then let it dry a little and then pivot it 1/4 at a time till done? Will it make a ridge between quarters if too dry? Help!
@JulieWeilbacher2 жыл бұрын
Hi Colleen! Wow what a project!😮 I would pour small quantities at a time, in between curing. It'll take you a while to complete. What type of resin are you using? Fascinating! Keep creating and I'm glad you're here!🙌
@septegram3 жыл бұрын
I'm thinking of using epoxy in place of grout. I have a piece that's glass-on-mirror, and I want a clear grout-equivalent. Your thoughts?
@JulieWeilbacher3 жыл бұрын
Hi Rob, oooohhhh sounds like an interesting project! Well, epoxy will definitely give you a clear grout equivalent plus permanently cover your glass pieces. As long as your adhesive is dry, you can pour the resin over your piece. Keep in mind that resin flows freely and is hard to 'contain' -- if being poured in an area that doesn't have a hard 'edge.' Good luck, sounds fun!
@septegram3 жыл бұрын
@@JulieWeilbacher It doesn't have a hard edge; it's a mirror with glass mosaic on it, but no sides. What I'd really like to do is have resin just as a grout replacement, not atop the glass. Could I use a syringe to put it just between the pieces?
@JulieWeilbacher3 жыл бұрын
@@septegram Ah, ok. Yes, you can put resin in a syringe. Remember to go as quickly as you can since you only have a limited amount of time while the resin is still workable.
@septegram3 жыл бұрын
@@JulieWeilbacher Thanks. I think I'll experiment a bit first. If I succeed, I'll try to send you a picture.
@JulieWeilbacher3 жыл бұрын
@@septegram Hi Rob, yes please, send a pic if you can. Would like to see how it turns out! Good luck!
@crystalbowman96592 жыл бұрын
I'm trying to make a mosiac for my floor 5 feet large. Can you walk on this type of resin? I'm using semiprecious stones and I don't want them to Crack when people walk on it
@JulieWeilbacher2 жыл бұрын
Hi Crystal! The resin used in this video is for arts & crafts. You need a resin specifically for floors (here's an idea: amzn.to/39Dduzj). I would suggest you consult a flooring specialist in your area. Keep creating and I'm glad you're here!🔥
@itishaparashrampuria9987 Жыл бұрын
Can we use resign in glass mosaic
@JulieWeilbacher Жыл бұрын
Hi Itisha! YES, absolutely! This video (kzbin.info/www/bejne/fIHHeXqHrrx3aZo) shows how I created glass mosaic later to be covered in resin. Keep creating and I'm glad you're here!🔥
@kimberlee20222 жыл бұрын
I've used epoxy resin for jewelry and no matter the brand, it turned yellow over time. So, I'm very concerned about ruining my mosaic pieces in the same way. I love the look, though.
@JulieWeilbacher2 жыл бұрын
Hi Kimberlee! Although I haven't personally experienced yellowing resin on my mosaic work, it seems UV light can be the cause. Many of the better-quality resins have a UV stabilizer built-in to help combat this problem. I agree, the look of the resin on mosaics is beautiful! Keep creating and I'm glad you're here!
@101Lovinglife9 ай бұрын
Epoxy resin can be dangerous and protectice masks are needed when using it. Please talk about safety. It can have severe health consequences.
@JulieWeilbacher9 ай бұрын
Hi there! Yes I agree, and I do!🙌
@meganpotter80452 жыл бұрын
Please use resin in a well ventilated space. Wear a respirator and glove up. You may not smell fumes but they are there until the resin is fully cured. Remove pets from the room too. See Aunty Tay for epoxy Poisoning.
@JulieWeilbacher2 жыл бұрын
Thank you Megan!🙌
@hfrt293 жыл бұрын
Covering it is definitely not recommended in my opinion you can message her whole piece up! You have to do it in a space that there's no dust make sure there's no fans running and it should be fine I do it all the time.
@JulieWeilbacher3 жыл бұрын
Hi Helen! The foil cover doesn't touch the surface of the pieces and allows air to flow around them. It also keeps dust from settling on the resin as they cure. Keep creating!
@bonnieannrossi2 жыл бұрын
Always make sure you use a face covering when using resin. Or well ventilated area. It will hurt your lungs.
@JulieWeilbacher2 жыл бұрын
Hi Bonnie! Yes, excellent advice! Keep creating and I'm glad you're here!🔥
@hfrt293 жыл бұрын
I have a small business.more like a 10- 15 min. window.
@JulieWeilbacher3 жыл бұрын
Great! That's good that you know how long your brand of resin allows you to work.
@subwaytm2 жыл бұрын
I wouldn't object if you time lapse the mixing!
@JulieWeilbacher2 жыл бұрын
Hi Rick! Thanks for your feedback. I was showing it in real time because some folks like to mix quickly which creates unnecessary bubbles. Keep creating and I'm glad you're here!🔥
@konestone9851 Жыл бұрын
I dont want to be that guy, but your one resin thing had some holes in it