You are the one who normally explained how to prepare flash drive properly on windows before writing the image. Everyone talks: "You need to format your drive in Mac OS Extended format. For this use Disk utility (software that is pre-installed in Mac OS). But what to do if I don't have MacOS? This manual is first that explained this moment. Thanks a lot
@adeyinkabrasil44267 ай бұрын
*This tutorial is a breathe of fresh air* in a world where YT has decided we no longer deserve the right to choose by hiding vídeo dislikes data. Thank you
@akdisraelАй бұрын
soo far this is the best tutorial i've found
@SportsEpicMoments-lx9os Жыл бұрын
That was awesome. It was simple, straightforward and last but not least it worked. Thank you
@TheZachnoahhannah Жыл бұрын
this worked like a charm and im soo a novice !!! thought my mac was done..nope, u can buy a 1tb scandisk usb srive for 24 bucks at best buy..fits the entire os system..ty so much
@Alexander_l32211 ай бұрын
No you can’t buy a a 1tb usb for that cheap. It’s a fake drive
@kristan631410 ай бұрын
Incredible, this saved my day. Thank you sooo much!
@Musical_Magic202311 ай бұрын
Wowsers, that was A LOT of steps, but I am so glad I came across this video because I cannot, for the life of me, figure out where my USB key wandered off to! I'm sure I'll find it now that I've completed this USB drive, but at least I'll have a backup!! Now to see if it works... EEK!
@Musical_Magic202311 ай бұрын
Nope. Stuck on a white screen. 🥺
@jamesf44411 ай бұрын
why is there no recovery 13.x dmg item to boot from in the bootable menu?
@PeterGriffin-ce4gj9 ай бұрын
Yeah, I have also the same question, please answer this if possible.
@Jeewan052 ай бұрын
Did anyone found a solution?
@dinujayajayasundara64472 ай бұрын
same problem
@overdriver99 Жыл бұрын
OMG... Thank you so much. I will try this today!
@Remusutul Жыл бұрын
how’s it going? :)
@Hitwithfin Жыл бұрын
When i put usb "recovery 13.x dmg" doesn't appear
@omarraidal-ezzi6984 Жыл бұрын
me too
@KevinMenya3 ай бұрын
Using iMac 2019 that was running Mac OS x. Everything is well until I try booting from the USB drive (Indicated as EFI). It hangs for about 4 minutes and restarts. Booting from Base System doesn't help either😤
@JeffRyanjhr547411 ай бұрын
I have tried this 4 times and everything all it does is boot to a blank screen.my mac was erased so I have no os. When I install and run everything in the video it never gives me an error, everything is smooth until I try to install the usb. It is just a black screen, any ideas?
@simplym4gic8 ай бұрын
I am running an amd ryzen9 5950x which isnt avaible in the preset list. I choose the "Desktop_11thGen_Rocket_Lake_iMacPro1,1.plist" for now but I cant get macOS to load on my amd chip or my laptop which uses an intel chip. The recovery option doesnt appear and when I load the macOS base system I get kicked out into windows
@truedinis Жыл бұрын
i have a problem, tried to install this rn and the last part of selecting recovery didn't appear, and i still have the same setup
@menitisunnah Жыл бұрын
Same here
@omarraidal-ezzi6984 Жыл бұрын
same here@@menitisunnah
@IamCwezy10 ай бұрын
Faced an error during bat on cmd...
@menitisunnah Жыл бұрын
Boot From " Recovery... "Don't Show off, any idea?
@theoxlix58265 ай бұрын
Same does it js show u boot
@xxgg Жыл бұрын
I did it exactly but I do not see the "recovery dmg" option during boot? I only see Boot & macOS base system, Reset NVRAM. ??
@BartechTV Жыл бұрын
Choose macOS base system
@xxgg Жыл бұрын
@@BartechTV thank you. I have figured out what I had to do to fix this. At least with computer I am using which is Dell Optiplex 3050 Micro with Kaby Lake CPU. I had to uncheck 'Enable Legacy BIOS ROM' to make it boot. As for the bootloader screen I have questioned on the comment, I now get the same boot options if I plug in the installer USB to a computer with hacktintosh already installed. Thanks for the guide! Hope to see more great, easy to follow clear guides!
@FyrekittenIsCool Жыл бұрын
Hey @BarTechTV I have found that if the recovery thing doesn't show up on pc, if you click on MacOS Base System it will launch!
@shihabindian6 ай бұрын
Thank you very much for guiding me on this ....
@illuminatedbook Жыл бұрын
i would like to thank u kindly for this video, unfortunately when i input the commands to download the recovery in CMD a window appears & disappears but no download happens, please help…
@Freekxng Жыл бұрын
do you have the command prompt download line for monterey? as i have a 3rd gen intel CPU
Hi! I chose MacOS Base System and it started loading, in about 30% in loading it stopped and it shows the apple support startup link with no error code showing, if possible, I'd like to get an advice, Core i7 10700K Edit: Also, I didn't understand completely if I'd be able to run directly on the usb drive or if it needs to be downloaded on a built in drive
@lelinuxien52 Жыл бұрын
Thank you for your work. I use same Fujitsu P420. I will try. OpenCore Legacy Patcher isn’t mandatory to setup ? I haven’t macOS to create bootable usb key with OCLP. Just need to push it after installing macOS ? Do you have test Sonoma on this P420 ? Thx.
@BartechTV Жыл бұрын
Yes I'm running Sonoma on this machine now. There's no need to use OCLP if you have a supported graphics card, but if you're intending to use the iGPU you'll need to use OCLP after installation to get graphics acceleration since the Intel HD 4000 series isn't supported.
@lelinuxien52 Жыл бұрын
@@BartechTV Thank you for your help. Your set of video helps me a lot.
@andrewsenior6795 ай бұрын
Can I use this tutorial to install Ventura on a second SSD, on a Win 10 PC with i5-7500 with integrated graphics?... Then just select whether to boot into MacOS or Windows on the boot screen that's included in this install?
@BartechTV5 ай бұрын
Yea you can.
@andrewsenior6795 ай бұрын
@@BartechTV Great, thank you 👍
@andrewsenior6795 ай бұрын
@@BartechTV I've created the boot drive (fantastic tutorial, so easy to follow!) but before I install I just wanted to check something, as I'm installing to a second SSD, will it give me the option of which SSD to install to? I don't want it to fire straight into overwriting my Windows C drive! 😬
@normanvalenzuela30554 ай бұрын
@@andrewsenior679what happened?
@pp1995rs Жыл бұрын
No recovery options in boot menu. Only boot, macOS base system and restet nvram. Where is the problem? SSD wich out partition create (FULL CLEAR). 3-gen intel z77
@BartechTV Жыл бұрын
Ventura doesn't support 3rd gen. It requires AVX2 support, so only Haswell or newer.
@PIRATES3D Жыл бұрын
@@BartechTV Hi! Nice video 👍 sry to bother you. I have the same problem. Trying to install on HP prodesk 400 g3 with i5-7500T. Thanks.
@Phyrex4711 Жыл бұрын
not working with i5-4590 neither...
@petedig5809 Жыл бұрын
@@BartechTV I'm having the same issue on a Dell 3040m i5 6500. I don't get a recovery option either.
@rFl_20_23_fx Жыл бұрын
I'm having the same problem..
@hagrid97409 ай бұрын
Followed every steps and I do not have Recovery 13.x DMG in the mac boot menu
@FyrekittenIsCool Жыл бұрын
@BarTechTV, Is there a auto driver getter for the hackintosh?
@romuluschitic59097 ай бұрын
Hi! I have followed the steps from your video. When I choose MacOS Base System from boot menu, it enters in a loop saying USB Flash Drive - detected termination of interfaceNub. I want to install Ventura on a Sony Vaio with Intelcore i5-3210M CPU. DO you have any hints for me? Thanks in advance
@BartechTV7 ай бұрын
You won't be able to install Ventura, because Ventura doesn't support the 3rd gen Intel iGPU.
@kingrichardsvideos7 ай бұрын
Great tuorial! I keep having a problem in the creation of the usb. When extracting Package, i get "Located BaseSystem.dmg...", "Extracting hfs..." and then "An error occurred extracting: 2". Happened with several usb sticks and memory cards (ranging from 32gb to 256gb). Any idea why this error?
@sunnyg2k Жыл бұрын
followed the steps serval times but of MACOS recovery option does not appear, if i select macOS Boot Option, I get the apple logo and then a reboot into windows... oh and now the machine gives a big beep when turning on..
@glennoldenburg8156 Жыл бұрын
I have the same issue, any fixes found?
@whospirit2 ай бұрын
how can i do this with el capitan for imac
@sagaramille9939 ай бұрын
hi, i have a macbook 6,1 late 2009. Which configuration templates i use? thanks!
@hashanudarajay Жыл бұрын
I tried not booting.only logo appears
@johng130311 ай бұрын
Please assist, am getting a "Virtual disk error , the selected volume device is in use " in cmd
@ViszlaBoss Жыл бұрын
No opencore recovery on boot. Just Windows, BOOT and macOS Base System. Any ideas what I'm doing wrong?
@andrewooo86 Жыл бұрын
Same need help thank you
@menitisunnah Жыл бұрын
Same here
@ScottSimons-o7i Жыл бұрын
Anybody figure this out?
@andrewooo86 Жыл бұрын
@@ScottSimons-o7i nope the creator just hoarded views without helping his viewers what a guy
@ViszlaBoss Жыл бұрын
@@andrewooo86 Exactly what happened!
@Mobtrickboss2 ай бұрын
please tell me this process needs WIFI at macOS installation window ??????????
@heyitsdazy Жыл бұрын
Doesn't Apple stop the OS from working on unofficial machines after updates? Plus is there a safe way to get older Mac OS? I found a website with them but am not sure if they are safe to use.
@BartechTV Жыл бұрын
The only safe way to get macOS is to download it directly from Apple. They have direct download links for macOS Lion 10.7 through Sierra 10.12 on their website, and you can download High Sierra through Ventura from the Apple Content Delivery Network or by using the gibmacOS script.
@cloudypillars3 ай бұрын
Awesome. You explain it like a pro, I really appreciate your time and concern. I have an old Macbook Pro 13 Mid 2012 (Model A1278 and want to create a High Sierra bootable USB. Can you help to create it? Thanks once again.
@LuisVargas6169 ай бұрын
Well, for some reason my mac is not recognising the UBS as a bootable device. I’m lost
@ElijahAlcantara11 ай бұрын
I keep getting "the recovery server could not be contacted" for my macbook pro 2011, I selected either Lion or High sierra with same results (I know this tutorial is for ventura but it's not compatible). I even changed the date and made sure the internet is connected. I'm stuck =/
@BCSkylight-id5od8 ай бұрын
It does't show the Recovery Option for me what did I do wrong?
@fercardonardenete3227 Жыл бұрын
Are those desktop EFIs usable on laptops? if not where can we get those?? thanks
@chitraksh.7 Жыл бұрын
no they are not usable on laptop
@CaptainNilsen6 ай бұрын
Can't Find Kext driver for my Ethernet ( Intel(R) Ethernet Controller (3) I225-V) or MediaTek Wi-Fi 6E MT7922 (RZ616) 160MHz Wireless LAN Card
@spyroskatsikidis7899 Жыл бұрын
Hello, I followe your guide with just downloading from macrecovery the sonoma variant, I choosed on PI imac,19,2 and created the EFI. Problem is that when i boot on the cd i dont see an option about recovery install just the baseimage option Does it have to do with the image i downloaded from the script isnt correct?
@BartechTV Жыл бұрын
Select macOS Basesystem DMG
@spyrokatsiki4743 Жыл бұрын
Hello and thank you for your reply,after choosing base image the installation stuck on the code before the installation wizard,I am using iMac 19,1 as a template and I have a 7th gen Intel processor with Intel 630. Do you think the problem is with the EFI? I used a premade one as well as following your guide I get a black screen after choosing baseimage
@omarraidal-ezzi6984 Жыл бұрын
same on my side and I use 7th gen intel with intel 630@@spyrokatsiki4743
@vojtech_richter Жыл бұрын
Tried with i5 9600K but got stuck in black screen after selecting macOS base system🤔. Any ideas?
@BartechTV Жыл бұрын
Which plist template did you use?
@vojtech_richter Жыл бұрын
@@BartechTV Thank you for your quick response. I've used Desktop_08th-9thGen_Coffee_Lake_iMac19,2_.plist. In OCAT, i tried both iMac19,2 i5-8500 and 9900K under the SystemProductName field.
@NguyenQuocTuan892 ай бұрын
Did you ever manage to get that black screen to actually boot? Please help me as i have the same problem
@amazingak8211 ай бұрын
hey i have an amd cpu and gpu how can i get the ocad file?
@RubenLobo-m3f Жыл бұрын
how do you switch OS between mac and windows after installation
@BartechTV Жыл бұрын
You select the OS you want to boot in the OpenCore boot menu.
@jeffreyculilap48477 ай бұрын
Can you show us how to install this in macbook without a macOS?
@mustafadadestroyer3006Ай бұрын
I'm using AMD CPU not Intel, what to do?
@n3v3rv073d9 ай бұрын
"No installed Python found!" when trying to download the dmg. I turned off aliases as well. Any idea why?
@anshul240819938 ай бұрын
You got this resolved?
@n3v3rv073d7 ай бұрын
@@anshul24081993 i did not
@ジョージマフェット10 ай бұрын
Great video! Thanks for posting! Any chance you could provide a similar recovery image address for El Capitan OS X 10.11? Or tell me where to find one? I tried the link on Apple support and it's no longer available from my maddeningly slow 2010 MacBook Pro.
@UNDERTAKER_Parasoul8 ай бұрын
Can, I mean with this, install Mac OS ventura on unsupported mac??
@SuperGiannakos8 ай бұрын
HELLO EVERYONE I HAVE THE BMAX B6 PRO MINI PC 10TH GEN (ICE LAKE). WHICH EFI SHOULD I TRY?
@BartechTV8 ай бұрын
The B6 Pro uses mobile hardware, so the EFI's linked from OCAT won't be suitable, as they're only for desktops. The BMax B6 Pro is basically identical to a 2020 Intel MacBook Air - it has the exact same CPU and iGPU - so it should be easy to get working. I would suggest looking for an Ice Lake laptop EFI on Github to use as a starting point and just remove the things you don't need, like battery management, trackpad, keyboard backlight kexts and so on.
@SuperGiannakos8 ай бұрын
@@BartechTV thank you very much i ll try it the next week !!! Thank you very much!!
@andrewsenior6795 ай бұрын
No MacOS Recovery, just MacOS Base. If I select that, I just get the apple logo flash up then a black screen? Anyone any ideas?
@JoArtsDev2 ай бұрын
fails to extract the .dmg file onto the usb pen at 40%, everytime.
@truedinis Жыл бұрын
hi, I'd like to know if i would be able to install this in a intel i5 4570s, btw it has a intel hd 4600 integrated graphics in it, and with 8gb of ddr3 ram
@BartechTV Жыл бұрын
Exactly the same process as in this video. You'll just need to use OpenCore Legacy Patcher after installation, to get graphics acceleration working, since the HD 4600 isn't natively supported in Ventura.
@truedinis Жыл бұрын
@@BartechTV oh thank you sm
@geesharp6637 Жыл бұрын
Did you get this to work? I have a 4570T I don't get recovery as an option when booting, I just see BOOT and macOS Base System and neither works. Just black screen.
@nickspot9690 Жыл бұрын
@@geesharp6637 same here with my i3 4th gen - i just bought a cheap 4570 and 4590 and will see if I get the boot options as shown in the video.
@Wheelmahn Жыл бұрын
Could you do one for SONOMA? How much storage does it need for the Flash drive as well?
@BartechTV Жыл бұрын
You can use a 4GB flash drive since it's an online installer.
@Wheelmahn Жыл бұрын
@@BartechTV thanks. Will you be updating a guide for the Sonoma version? I'm trying to do a Hackintosh by following your guide. It will be really helpful 😁
@BartechTV Жыл бұрын
Yes, my 13th gen Sonoma build video will be out in a few days, along with a new tutorial video for creating a bootable Sonoma installer in Windows.
@mistervik Жыл бұрын
@@BartechTV where can i find the installer? i tried downloading with the py script but didn't do anything. thannks in advance, and thanks for your videos
@mistervik Жыл бұрын
@@BartechTV forget my other comment, i will wait for the sonoma tutorial video. thanks dude
@andrewooo86 Жыл бұрын
@bartech hi there is no recovery have followed your instructions need help thank you
@andrewooo86 Жыл бұрын
Have tried to redo all the process now i have 2 options USB only and UEFI USB when i chose usb i would enter a _ blinking only but when i choose UEFI USB i would be prompted by the boot selection without recovery
@andrewooo86 Жыл бұрын
Should our hard disk be empty for recovery to appear?
@chitraksh.7 Жыл бұрын
@@andrewooo86 no i dont think so
@omardahy77410 ай бұрын
will it work in old imac
@leandroatherinomacedo14563 ай бұрын
Not sure it will work on mac pro 2011.
@ZTemplatePvPYT Жыл бұрын
i only have usb3.0 ports, is it still possible to install it?
@BartechTV Жыл бұрын
Yes, just use a USB 2 flash drive in the USB 3 port.
@ZTemplatePvPYT Жыл бұрын
@@BartechTV thank you so much! the problem I’m having is that it keeps rebooting after the apple logo appears, so I can never start the installation process. might have to do with the plist file, because I didn’t find a laptop tiger lake version. kinda need help
@BartechTV Жыл бұрын
There's no support for the iGPU in Tiger lake CPU's. You can only run macOS without graphics acceleration, so performance would be very bad. You can try this EFI - github.com/deniro98/hackintosh-asus-zenbook-duo-ux482ea
@insidedetails61017 ай бұрын
Although my problem was not solved, you are wonderful and your explanation is wonderful, man. I benefited a lot from your information, but I wished you would tell us that this does not suit MacBook Pro devices.Config Templates plist only for imac and mac :(
@hmmm8271 Жыл бұрын
Thankyou sir
@SushilHembrom-g6d Жыл бұрын
Thank you sir.
@adeyinkaapata8952 Жыл бұрын
Still waiting for the video on ventura hackintosh for 13th gen CPUs
@ductang609 Жыл бұрын
Me too, please
@HendrikBerend68 Жыл бұрын
Yeah, me too ☺️ That would be great.
@hashimsawalha9 ай бұрын
can you remove it if i dont want it anymore
@BartechTV9 ай бұрын
Yes just reformat it.
@heartbrainfusion Жыл бұрын
Hi there, new subscriber here. I would like to know if I can use my old i3 4150 (Hashwell cpu) for this Hackintosh build? Thank you and more power to your channel.
@BartechTV Жыл бұрын
You can but you'd have to spoof the HD 4400 iGPU device-id to HD 4600. In Device Properties, under PciRoot(0x0)/Pci(0x2,0x0), add AAPL,ig-platform-id with the value 0300220D and device-id with value 12040000. And then use OpenCore Legacy Patcher after installation to get graphics acceleration.
@DilsonAbraham Жыл бұрын
It was a great tutorial. How can I get this to install on an AMD RYZEN CPU PC. Because the procedures explained are for an intel CPU. If you could do a tutorial for that on what kexts to be used and where to download them. That would be great info.
@BartechTV Жыл бұрын
Sadly I no longer have a Ryzen machine myself but a good source of information is the forum at forum.amd-osx.com
@Xrolyx9 ай бұрын
Is all the info needed, here?
@KASTairsoft Жыл бұрын
Hello, BarTech I got the same system just with an 4590 cpu tryed my best to match all the steps you’ve done in the tutorial and then tryed it again. I’m not getting the pc to launch the installation. When I hit the macOS recovery button apple logo appears and then the pc reboots directly. Any ideas? Thanks
@vihangapro10 ай бұрын
i want on arm cpu
@abhishekhembrom8781 Жыл бұрын
gibmacos Isn't working 😢
@BartechTV Жыл бұрын
I just rebooted into Windows and tested it now, it's working fine.
@abhishekhembrom8781 Жыл бұрын
it worked for me but now i got new error the pen drive isn't detecting uefi : Sony pen drive and its just showing Sony pen drive and after clicking that it is showing insert proper bootable drive @@BartechTV
@sage504411 ай бұрын
Great video. Didn't work for me though it's a good start will keep at it
@youssefmostafa5788 Жыл бұрын
please help, gibmacos isn't showing any drives and i can't find my hardware in the plist, my cpu code name is ice lake
@THEISTT Жыл бұрын
Bro please test apple motion in your i3 10th gen hackintosh And give benchmark 😊
@owencharles75798 ай бұрын
hey
@DIYfixtrow8 ай бұрын
Useless. unzip file diferrent on video.
@nicholasoanelka2 ай бұрын
Ur step is too
@ScottSimons-o7i Жыл бұрын
When I run macOS base system it loads the apple logo then it goes away and boots into windows? Any ideas?