How to create patches on Digitech RP55

[@vincentryanborres]

Hello everyone. Thank you for all the support! By the way I wanted to share my new album #canalwalk kzbin.info/aero/OLAK5uy_kuqeO0kfy9J1byjqkwhF01sdE0vGq3Fh0&si=rblwnXeCnw5xJfP9

[@maddmaxxgaming2031]

Vincent you are doing a great job! I dont think anyone is explaining about rp55 on youtube as good as you! Can you help me with the patch of carry on jon song by blackmore night on digitech rp70 Love from Goa, India

[@akashshah579]

Hey great content! Have same processor but have lost my manual can you share photos of manual if possible ?

[@vincentryanborres]

Same with me I sold my unit including the manual. Then I bought this second one used one and no manual. But found manual online. Here’s the link: www.digitech.com/on/demandware.static/-/Sites-masterCatalog_Harman/default/dwc0bc7846/pdfs/DigiTech_RP55%20Manual%2018-0838V-A.pdf

[@akashshah579]

@@vincentryanborres thanks for this appreciate it alot !

[@accentontheoff]

Hi Vincent I have another question if you don’t mind. When you make a patch on the Digitech RP 55 and then run it into a guitar amp (either combo or head+cabinet), do you also activate the amp simulation on the RP. Many other multifx pedals advise against that as it would be doubling up the amp. But on the RP I am not sure if that logic applies. Also, when you activate the amp on the RP, what do you do for distortion - it seems to be one or the other. Thanks!

[@vincentryanborres]

Good day! The amp option in this pedal, works as your drive or distortion pedal. However, the pedal got a cab sim option which is the one that I turn off because it’s only useful when you’re using the pedal with like headphones or direct to a mixing desk. When I’m using an actual amp, I turn it off. So that the true sound of the amp will come out. Again with the amp option as your distortion/drive, you can use it or if you got an individual distortion or drive pedal, it will also work in combination with the pedal.

[@accentontheoff]

@@vincentryanborres Got it, thanks for the reply!

[@accentontheoff]

@@vincentryanborres I’m finding the 4-5 distortions in this device to be not so good, is it just me. What do you use as a distortion. One of the amp sims?

[@accentontheoff]

@@vincentryanborres What I meant to ask was… can the amp sims do the EXACT job of a distortion pedal… as I am finding the 6 distortion pedals on this to be not very good.

[@vincentryanborres]

Here's my Clean, Overdrive and Distortion settings. Hope you can get ideas to it. kzbin.info/www/bejne/mWnGZYxniamrlbM

[@accentontheoff]

Could you recommend an expression pedal that works with this device. I have the RP 70. Thanks.

[@vincentryanborres]

I think this should work as a replacement wah pedal kzbin.info/www/bejne/q2eumnyEZcl7gdE

[@accentontheoff]

@@vincentryanborres Hey thanks, super video will give it a go. But isn’t there any official supported pedal which I can use without tweaking. What about the Nektar. (On another note what’s the orange unit near your pedal.)

[@vincentryanborres]

Im not sure with the Nektar universal expression pedal because normally the expression pedal like the one I got is being used for keyboards that's why I wasn't sure. But you can give it a go. And then return it or just do how I did it. Because I think the Digitech requires TS jack and the ones on the universal expression pedal got TRS. The red thing that I got next to the pedal is the Behringer UCA222 which is my audio interface when Im recording videos. I plug the effects pedal to it and then connect it to my ipad or iphone and record using the phone's camera. Here's the link for this audio interface: kzbin.info/www/bejne/l6fFfKyiqdeErKs

[@accentontheoff]

@@vincentryanborres Ah ok so I guess the TRS is the main thing. Will check out the Behringer too. Thanks for the detailed reply.

[@vincentryanborres]

Yeah cool

[@josecarsa1]

hola vincent, me puedes enviar por favor las especificaciones técnicas de el transformador de voltaje que utiliza esta pedalera pues la mía no trae transformador, yo compre uno pero me suena mal con este transformador...gracias amigo...

[@vincentryanborres]

Generic 9 v adaptor. input 100-240v. output 9v 300mA polarity negative inside and positive outside

[@ajaymahiofficial697]

Please make video lead patch ....setting

[@vincentryanborres]

I do have my generic clean, crunch and lead patch. Here's the link: kzbin.info/www/bejne/mWnGZYxniamrlbM Hope this will help.

[@ajaymahiofficial697]

@@vincentryanborres thanx sir ....it's very helpfull

[@vincentryanborres]

@@ajaymahiofficial697 welcome. Glad to help. I got a playlist about RP55, May be some of my videos will interest you. kzbin.info/aero/PLBxYCa_SF0sMEVPWaGdjkiJa5JrK9j2e6

[@luiscirca2002]

Salamat sa vid sir. Pwede po pa-demo yung clean amp sim ng rp55 with analog dirt pedals? 🙏

[@vincentryanborres]

Thank you! Ang meron pa lng ako ay yung Mosky at RP55 kzbin.info/www/bejne/anW9k6Jsi56eqNE

[@vincentryanborres]

Saka RP55 and Zoom G1Four kzbin.info/www/bejne/jmSxaXuYfdR5pck

[@eduardomisaelsalasrincon4876]

Thanks

[@vincentryanborres]

Misaeus _Yt glad to help

[@frankcastle407]

thank you sir!! now i have an idea to make a patch! in a multi efx! hehe its quite really tricky

[@vincentryanborres]

Kimaroo Villanueva you’re welcome. I made a playlist actually about this digitech RP55. Here’s the link: kzbin.info/aero/PLBxYCa_SF0sMEVPWaGdjkiJa5JrK9j2e6

[@buraxxianzzerokwatro1924]

Ayos sir.. Wait ko Ang ibang patch nyo

[@vincentryanborres]

Okies sir. I will post some more. Na-excite lng din kasi ako kahapon pagkadating ng pedal deritso sabak at nagvideo. Gagawa pa ako ng iba pang video regarding RP55. God bless sir.

[@vanseekers7956]

May harmonic ba yan

[@vincentryanborres]

kzbin.info/www/bejne/pZTUeHaEjZVorNEsi=3FktWdle3xZyLEub

[@kimkim6524]

Hi im your subscriber how to factory reset in your Rp55 to back into original factory reset plss asap😊

[@vincentryanborres]

The procedure for performing a Factory Reset is as follows: 1. Disconnect the power supply from the RP55 (AC Power) or unplug the guitar from the input jack (battery power). 2. Press and hold the left EDIT button while re-connecting the power or plugging your guitar into the RP55's input. 3. When the display reads --, release the button and press the STORE button. The display reads rE. The RP55 is now restored to its factory settings

[@kimkim6524]

I try to fallow The step but when i disconnect to the power supply its already off and i have no idea why its not working but one think in my mind it is possible to have a battery power? To fix???

[@vincentryanborres]

@@kimkim6524 Bless you. I also havent tried it because I don't need to reset my RP55 because of my saved patches. I only look this from the internet. kzbin.info/www/bejne/qKaTq4mVjNyZoq8

[@orchidmalevolence9726]

I love your accent. Can you say that again?

[@vincentryanborres]

Orchid Malevolence hahaha! Hope all is well with you. Keep safe! By the way I got more videos coming and putting more effort to it. You’re definitely going to enjoy more. Going to have a good laugh together!!

[@orchidmalevolence9726]

vincent ryan borres asahan ko boss. already subscribed

[@vincentryanborres]

Orchid Malevolence thank so much. Keep safe. Kitakits!!!!