How to create perfect inlays with a CNC every time // Woodworking // Tutorial //

  Рет қаралды 81,329

Gearhead Daily

Gearhead Daily

Күн бұрын

#woodworking #shop #Woodworking #Howto #diy
Garrett Fromme - / idcwoodcraft
My IG page: / maxharvard
Check out the 3 books I've written!
4L80E Rebuilds - amzn.to/3hVsjOS
LT1 Performance book: amzn.to/2Fuip2n
LS Swap book: amzn.to/2BPv0NJ
Amana 6.2 Vbit - amzn.to/3c9Dmk5
TiteBond III - amzn.to/3euMMby
Powermatic Table saw: amzn.to/35P3dLr
Jet Jointer/Planer: amzn.to/2XOFRRV
Wen Sander: amzn.to/3inXcKW
DeWalt compound miter saw: amzn.to/3qmmhbY
Jet 2550 Drum sander: amzn.to/3nTShmf
Kreg Pocket hole jig: amzn.to/2XSoz6c

Пікірлер: 516
@ianbost193
@ianbost193 2 жыл бұрын
This is a good tutorial! I would point out one thing though - the flat depth on the plug doesn't change the size of the "glue pocket", it changes the gap between the pieces at their surfaces. The glue pocket size is determined by the difference between the pocket depth and the start depth of the plug. So if your pocket depth is .2" and your plug start depth is .18", there will be a .02" deep glue pocket. The flat depth then is for leaving a gap between the surfaces (if you want one, for example some people like to cut the plug waste away with a bandsaw). If you changed it to something extreme, say 1", then there would be a 1" gap between the surface of the board and the opposing surface of the plug waste. But the glue pocket would still be .02" because that's the difference between a .2" pocket and a .18" plug start depth. Hope that makes sense! Cheers
@TheKirk48
@TheKirk48 Жыл бұрын
Stars, this is absolutely genius! Thank you co much for sharing this.
@cqpzg
@cqpzg Жыл бұрын
Thank you so much for the tutorial. Really nice to see the physical examples with the plugs cutaway as well as the software walkthrough. About to try some cutting board inlays.
@GearheadDaily
@GearheadDaily Жыл бұрын
Good luck!
@petenewhall511
@petenewhall511 11 ай бұрын
One of the easiest tutorials on the subject to follow and understand. I have watched them all and this is the one I recommend to others. Thank you for making this!
@GearheadDaily
@GearheadDaily 11 ай бұрын
Thank you!
@Tminsquero1975
@Tminsquero1975 2 жыл бұрын
Stars, absolutely great video! I'm getting ready to purchase my first CNC and this was perfect for me to watch. Thank you
@GearheadDaily
@GearheadDaily 2 жыл бұрын
awesome! Good luck with it :)
@plankie1965
@plankie1965 2 жыл бұрын
Stars. Finally. A video that explains everything you need to know. And easy to follow and understand. Thank you Sir. Appreciate the help.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Any time, glad it has been useful to you :)
@casacustoms
@casacustoms 2 жыл бұрын
Stars, thank you for showing these steps. Especially the milling and install of the stars. Most how-to videos skip this important step. Again thank you Sir for sharing your knowledge and your time.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Glad it was helpful!
@andretoubkin3083
@andretoubkin3083 2 жыл бұрын
Stars - what a great video! You really explained the whole process well. Thank you.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Thanks for watching! And you got the word!
@jimGrime
@jimGrime 30 минут бұрын
Stars. Great insight! Thank you
@billgreen4592
@billgreen4592 2 жыл бұрын
Stars! That is the same bit that Broinwood uses! His inlays are remarkable. I have been using the vcarve path for my plugs, but next one I do I will use the pocket!This has been very helpful, it also shows that I can always learn more. Thanks for posting this.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Glad it helped! :)
@chuckbroten
@chuckbroten 2 жыл бұрын
I have read and watched several videos of ways to do V Carve and find this method works best. What I like is that it doesn't cut as deep (unless you want to) and this cuts down on the time it takes to carve something. I also like the way the tapered bits work in this method since they cut easily and clean. I used a 3-degree bit, and the joints were exceptional. Unless I have large areas, I don't use a clearance bit and the bottoms are exceptionally smooth. Thanks for taking the time to put this together.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
You got it, thanks for stopping by :)
@kipphockin5896
@kipphockin5896 Жыл бұрын
Stars: I just ordered the bit to help in fixing my horrible inlays. Garrett has also helped me in some of the struggles I've had as a "newbie". Thanks for the info
@GearheadDaily
@GearheadDaily Жыл бұрын
Glad i could help, good luck.
@hankpirelli74
@hankpirelli74 4 ай бұрын
STARS!!!!Just brilliant tutorial 👏👏👏
@williamlockridge7192
@williamlockridge7192 Жыл бұрын
Star. Excellent tutorial. Thanks for taking the time to make this video!!!!
@GearheadDaily
@GearheadDaily Жыл бұрын
Glad you enjoyed it!
@craftykrafcky
@craftykrafcky 2 жыл бұрын
Stars... Great video. Still completely new to the whole CNC thing, but your wisdom certainly puts me on the right path.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Glad i could help :)
@clairecollyer437
@clairecollyer437 8 ай бұрын
Stars! Thank you for this tutorial this was the best one i have found so far!!! Really appreciate you taking the time to share your knowledge
@GearheadDaily
@GearheadDaily 8 ай бұрын
Glad I could help! :)
@siamakshams1923
@siamakshams1923 7 ай бұрын
Great tutorial. The value for me was the confirmation that "your work is as good as your tools". Thank you.
@GearheadDaily
@GearheadDaily 7 ай бұрын
Glad I could help :)
@lowrider9367
@lowrider9367 Жыл бұрын
Stars This is one of the best inlay vids I have see yet. I like the way you explained the tool pathing & depth. Thanks...
@GearheadDaily
@GearheadDaily Жыл бұрын
Thanks for watching! :)
@Curious_Skeptic
@Curious_Skeptic Жыл бұрын
Stars, and strips! Thanks for sharing this info! Looking forward to getting my hobby shop going. Last commercial cabinet shop I owned had a 14" table saw, miter box, quality spraying equipment, lots of air drills, misc tools, oh, and me! Now, looking at cnc point to point machines under 4k? Laser cutting under 2k? OMG, I would have gone crazy with this stuff back in the day! Now, in my 50's, no chance I want a big shop and a giant table saw. You work on this set up looks simple, clean, fun, and actually not over the top expensive to get into. Thanks for the video.!
@GearheadDaily
@GearheadDaily Жыл бұрын
thanks for the comment and good luck! it's certainly more interesting now with CNC tools
@ryanpeckphoto
@ryanpeckphoto Жыл бұрын
Stars, Thanks for this. Great idea to use that shallow tapered ball nose so that you don't lose the size of inlays as you sand down
@Johnny.D
@Johnny.D 2 жыл бұрын
I had watched Garrets video on inlay and definitely will be using those numbers but I am happy to see you can use a tapered carving bit to do the actual cutting. I feel the 90 and 60 deg v bits are too wide to make tight corners plus using the pocket method is excellent as well. Thank you for this.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Hope it works out for you :)
@CaptCorpMURICA
@CaptCorpMURICA Жыл бұрын
Stars, I just started my woodworking business and MURICA cutting boards are one of my ideal products. These settings are perfect for my testing for this week. Thank you.
@GearheadDaily
@GearheadDaily Жыл бұрын
Glad i could help
@sod57
@sod57 8 ай бұрын
Stars are looking great! This is a great help, I'm about 3 months into the cnc world and want to start doing some inlays, so thanks for the great info!
@GearheadDaily
@GearheadDaily 8 ай бұрын
Glad i could help
@BenchGDD
@BenchGDD 2 жыл бұрын
Stars stars stars Excellent tutorial, will implement the numbers you shared. Thanks!
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Thanks! I hope it works for you :)
@daniellemcclellan637
@daniellemcclellan637 2 жыл бұрын
🌟 Awesome! Even better to see it in person.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
I think so too!
@mikedurkee7296
@mikedurkee7296 6 ай бұрын
I have used this video multiple times for doing inlays and they come out perfect every time. Thank you!
@GearheadDaily
@GearheadDaily 6 ай бұрын
Wonderful! Glad it helped :)
@aspirecncworks5686
@aspirecncworks5686 5 ай бұрын
can you please help its not working for me . can you show how you are doing it
@luisssyou
@luisssyou 2 жыл бұрын
Stars, Thank you for this video, it explains inlays as you really want to do them! I have the Amana 46282-K thats 5.4 degrees and so far I've used it for 3d reliefs, excited to try our your method, I subscribed :)
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Ya, that's a solid bit as well. Should work really well.
@ApexWoodworks
@ApexWoodworks 2 жыл бұрын
Stars look quite nice when done this way. I liked your use of a steeper angled v-carving bit for inlaying.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Thank you!
@jamesbannerman4804
@jamesbannerman4804 Жыл бұрын
STARS, What a revolutionary Idea. Completely different than I see everywhere else. Going to try this this weekend. Excellent video and explanations. Much appreciated.
@GearheadDaily
@GearheadDaily Жыл бұрын
I wish you the best of luck :)
@sparkx38
@sparkx38 2 жыл бұрын
Stars - Thanks for sharing. Great info and instruction. Will be trying out the recommended bit.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Hope it works out for you :)
@lock15woodworks25
@lock15woodworks25 2 жыл бұрын
Stars! Great video explaining the process.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Hope it helps!
@dennisfeagin8050
@dennisfeagin8050 2 жыл бұрын
Stars. This was really useful, I’m using vertex vcarve pro and a one finity cnc. There is a steep learning curve but you Garret mark L and a few others are making the learning soooo much easier. Mahalo
@GearheadDaily
@GearheadDaily 2 жыл бұрын
any time, glad i could help.
@jamesrice2916
@jamesrice2916 2 жыл бұрын
Stars great job making it simple and easy to follow keep up the great work.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Thank you!
@jimhatch5873
@jimhatch5873 2 жыл бұрын
Stars turned out great 😉 Garrett has some nice videos for folks just getting into CNCs or even just a new technique in VCarve.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Thanks 👍
@nickcummings81
@nickcummings81 Жыл бұрын
Stars … great video! As a beginner in the cnc world this content keeps me understand better especially the fact that I’m using vectric v carve pro and have a onefinity journeyman! Keep up the good work and again thank you! You have a new subscriber!
@GearheadDaily
@GearheadDaily Жыл бұрын
Thank you! Appreciate the support. I have a tips and tricks video for new CNC workers too if you want to check it out, it may help.
@billysmether6237
@billysmether6237 2 жыл бұрын
Yup, you hit it right on the money with the tool. Thanks for video!
@GearheadDaily
@GearheadDaily 2 жыл бұрын
thanks! :)
@Rick-ip8bj
@Rick-ip8bj 3 ай бұрын
STARS- Awesome video. Tried your system and worked perfectly. Thanks!!!
@GearheadDaily
@GearheadDaily 3 ай бұрын
Glad I could be of help :)
@karlsangree4679
@karlsangree4679 Жыл бұрын
Great tutorial! I was confused for a moment as to how you got the clearing toolpath for the pocket. I didn't create one for me, but then I saw you already had the end mill in your tool list on the pocket toolpath. Once I went back and added the end mill to the tool list, all was right with the world. Thanks again for an awesome, easy to understand tutorial.
@GearheadDaily
@GearheadDaily Жыл бұрын
you got it!
@xridg3x_437
@xridg3x_437 2 жыл бұрын
STARS, Videos like these make me want to get a CNC when I retire in a couple years. The stars look SHARP! Liked and Subcribed!
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Thanks! its not only a hobby but a good source of income too.
@MrReymagic
@MrReymagic 3 ай бұрын
Grazie per aver condiviso la tua esperienza! 👏
@GearheadDaily
@GearheadDaily 3 ай бұрын
No problemo
@davelechner2547
@davelechner2547 2 жыл бұрын
Stars, Perfect tutorial, Thank you. I am new to the CNC craze and really struggles with the inlay. This is going to allow me to make it happen.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Goodluck!
@davelechner2547
@davelechner2547 2 жыл бұрын
@@GearheadDaily I see you imported your bit size. Is this available with the trial and how did you do it. looking for a tutorial on how this is done now. Thanks
@BarryFranzen
@BarryFranzen 4 ай бұрын
STARS....Thank you. nice job
@emanuelortiz3667
@emanuelortiz3667 Жыл бұрын
Stars.... Good tutorial ! Thank you. I'm new to Aspire and I love it, there is so much to do with it ! Keep up the good work!
@GearheadDaily
@GearheadDaily Жыл бұрын
Thanks! if you are feeling generous you can use the tip button ;)
@jefferytwilliams
@jefferytwilliams 2 жыл бұрын
Stars looks like carbine tooling in machine shop very cool. I use to machine carbine inserts pockets for tooling back in the day
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Very cool :)
@rufustoad1
@rufustoad1 2 жыл бұрын
Nice job. I am excited to try this method.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
It works well! Hope it helps
@richardbaynes3862
@richardbaynes3862 2 жыл бұрын
Stars...Great video! I was a little miffed at first with the downplay of the Vectric method - originally the Paul Zank method (a great friend of mine - RIP)...BUT, every thing you said was spot on and easy to understand and make sense...can't wait to give it a go.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Glad I was able to help :)
@unclebedhead9099
@unclebedhead9099 4 ай бұрын
stars. new to cnc, learning inlays. 3 days trying to get the numbers right, and can't figure out those rounded inner corners. i had watched almost half of this video previously and stopped, as i was looking for carveco and metric tutorials... today i solved the corner problem by doing pocket instead of vcarve, just trial and error, now this evening i'm looking for more tutorials, and refind this video, watch all the way, and realize i had only needed to keep watching for another couple minutes to have gotten the info i needed a week ago!. thank you.
@GearheadDaily
@GearheadDaily 4 ай бұрын
Glad i could help! Tell your friends and sub if you can :)
@Pablosan7
@Pablosan7 Ай бұрын
Stars…love it! 👌😊
@vidana789able
@vidana789able 2 жыл бұрын
Beautiful video man love it!
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Glad you enjoyed it!
@dennismacwilliams196
@dennismacwilliams196 2 жыл бұрын
Stars, Great Video supper job, WOW so helpful and Easy to follow. thank you
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Glad it helped :)
@Trippintim05
@Trippintim05 2 жыл бұрын
Stars, just wanted to give a shout out that even 3 months later your video is still getting watched 👍 and still teaching
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Awesome! Thank you :)
@DCDLaserCNC
@DCDLaserCNC Жыл бұрын
Stars. Great tips! That will be an awesome cutting board!
@GearheadDaily
@GearheadDaily Жыл бұрын
I think so too!
@JimG31547
@JimG31547 2 жыл бұрын
Stars, Thanks for the great tip.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Anytime hope it helps
@prophotoservices
@prophotoservices Жыл бұрын
Stars! Stars! Omg Stars dude!!!!! Wow you killed it! My father was born in 1907 and made his living as an interior finish carpenter. He would pat you on the back and with his deep Swedish accent say want to go get some coffee? He would love to talk with you and spend Time in your shop making things all day long and so would I! Thank you for making this Video!
@GearheadDaily
@GearheadDaily Жыл бұрын
You had me at Swedish finish carpenter LOL!
@prophotoservices
@prophotoservices Жыл бұрын
@@GearheadDaily ha! Yea back in the day it was all by hand. I was looking for the brand and model of CNBC you were using. Did I miss that?
@GearheadDaily
@GearheadDaily Жыл бұрын
@@prophotoservices I'm using a Onefinity. is that what you were looking for/
@douglasmitchell4063
@douglasmitchell4063 2 жыл бұрын
Stars- really nice! I learned a lot. I am subscribing. Nice presentation as well. 👍
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Awesome, thank you!
@nancej100
@nancej100 Жыл бұрын
Thanks for the video, I am new to cnc trying to learn. Good videos like your help Thanks
@nancej100
@nancej100 Жыл бұрын
Stars
@clarkriccobuono3903
@clarkriccobuono3903 6 ай бұрын
Stars I'm amazed the difference in bits to get those sharp points. Thank you
@GearheadDaily
@GearheadDaily 6 ай бұрын
Glad I could help :)
@fredwienbarg5051
@fredwienbarg5051 Жыл бұрын
Great video! Thanks.
@GearheadDaily
@GearheadDaily Жыл бұрын
Absolutely
@larryhotchkiss1924
@larryhotchkiss1924 Жыл бұрын
Well, im stumped. Its been some time but historically I have had ok luck doing inlays. Been out of the shop for some time due to medical reasons and figured id kick out a project with a simple inlay. Using the exact same amana bit (46280) and 1/4em for clearing I have a very simple pocket with an island in the middle (think doughnut) using your exact same settings as in video: female pocket = vcarve toolpath start depth 0" and flat depth .2" Male plug = pocket toolpath, start depth .18" with cut depth of .02" I even tried using v-carve tool paths for both male/female ends and same result. The plug drops right it with play I can feel. Not a tight fit at all. Thinking maybe the original SVG was somehow to blame I imported the SVG again on a brand new project. Selected outer and inner vectors and did a v-carve toolpath. Copied the same 2 vectors to a new layer, flipped them, selected outer vector and created an offset of it and then selected all 3 nested vectors to create pocket toolpath. Im totally stumped as to why I have such a loose fit. The machine is a onefinity woodworker and I have not noticed any play in of the axis. no wavy/uneven cuts on any axis yet still have sloppy inlays, super frustrating.
@KennethHall
@KennethHall 2 жыл бұрын
Stars. Great tutorial, I am sure I will see more great effort on your part, subscribed.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Thanks!
@peterc.679
@peterc.679 25 күн бұрын
STARS!
@SmittenKitten.
@SmittenKitten. 5 ай бұрын
STARS!!! You're awesome!
@GearheadDaily
@GearheadDaily 5 ай бұрын
I try ;)
@rayhensley6853
@rayhensley6853 8 ай бұрын
STARS- Thanks for posting this tutorial. I've been running my shop as a legit business for a couple of years now, but I have somewhat pigeonholed myself and have to expand for a widening customer base. I hate telling a customer "I can't do that" and it gives them the impression that I'm totally clueless. I've half-assedly played around with inlays, but not seriously enough to learn it well. This has given me a lot to consider, especially using a TBE bit to cut with, and not a V bit. It's a concept I hadn't ever heard of, until now. When I have tried inlays, I almost always ended up with something that looked just okay, at best. Most inlays would be ill-fitting and/or have gaps in places that should have been tight. I'm glad I found your video, thanks again for posting!
@GearheadDaily
@GearheadDaily 8 ай бұрын
Glad I could help! Nothing wrong with telling a customer "that's not my speciality". Done that many times, gives me a good excuse to network and recommend a friend.
@aspirecncworks5686
@aspirecncworks5686 5 ай бұрын
have you tried it ? it didnt work for me
@Michael-lk5zl
@Michael-lk5zl 2 ай бұрын
Stars - Thanks this was very helpful, I haven’t done an inlay yet, but I will use your method. 😊
@GearheadDaily
@GearheadDaily 2 ай бұрын
Good luck! I just did it again
@tornadokat
@tornadokat Жыл бұрын
I participate heavily in several Facebook CNC groups and one topic people need help a lot with is inlays. I see people throwing out all sorts of crazy numbers they got "from a video" that don't work so they ask for help. I have a couple videos I often send them to and/or quote numbers they should try. Your numbers with a .02 glue gap align with what I already have been telling people but I must say your video is better than any of the other ones I have seen on doing inlays, especially the part about using a narrow TBN instead of a V bit to get steep walls. I'm going to start referring people to this video.
@GearheadDaily
@GearheadDaily Жыл бұрын
Thanks! I appreciate it. I really got into it and thought the numbers from Vectric didn't look right to me so I played around and shared my results :)
@Bluecordcustomfab
@Bluecordcustomfab 6 ай бұрын
Stars, thanks for the information it greatly helps
@GearheadDaily
@GearheadDaily 6 ай бұрын
You got it, glad it helped :)
@Chriswoodworker
@Chriswoodworker 2 жыл бұрын
Stars, Great video. Thanks
@GearheadDaily
@GearheadDaily 2 жыл бұрын
You're welcome!
@grant4458
@grant4458 2 жыл бұрын
Stars - Thanks bruv great video.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Much appreciated
@MartyOfAllTrades
@MartyOfAllTrades 2 жыл бұрын
STARS, man this is a great video. I am working on trying the inlay in the stars and this has helped me a great deal. I am planning on getting the 6.2 TBN very soon..Many thanks,
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Excellent, hope it goes well :)
@MartyOfAllTrades
@MartyOfAllTrades 2 жыл бұрын
@@GearheadDaily almost ready to do an inlay. How does the TB Amana bit hold up on the purple heart and what speeds are best when using the 6.2 bit?
@GearheadDaily
@GearheadDaily 2 жыл бұрын
@@MartyOfAllTrades usually 100in/min is what I use. Seems fine with harder woods because the bit is so small.
@DavidWilliams-xq7jt
@DavidWilliams-xq7jt 2 жыл бұрын
Stars great video love my onefinity and just subscribed!
@GearheadDaily
@GearheadDaily 2 жыл бұрын
thanks! :)
@godchaiser
@godchaiser 2 жыл бұрын
STARS!! I haveto say this was excellent! I have a laguna CNC and use Aspire. The 1,2,3 method aspire uses sucks! I have been attempting to reach Broinwood for sometime now in asking what depths they use for their boards as I really want to try a more complex board, however using aspires methods would fail miserably. I just finished a board that I am not happy with due to the hollow sound it has from the inlay. I am going to try your method on a more complex board and see what happens. I have the bit you recommend already in my tool kit, and I understand the 15 degree bit is another great one to use. Thank you very much for this great tutorial....thewoodwright
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Thanks! I have watched the Broinwood videos and I believe this method is very close if not exactly what they do. It wasn't too hard to reverse engineer.
@TerrapinCreations666
@TerrapinCreations666 4 ай бұрын
Thanks!
@lloydsnyder2738
@lloydsnyder2738 Жыл бұрын
Stars Great video. I use the 0.0, 0.3 and 0.2, 0.1 method in Vcarve Pro. My primary bit is 1/4 inch carbide 60 deg. Never had an issue with fine details. Having said that, I am going to try your method as I am open to new ideas. I have the Amana bit you reference, but I've always thought of it as a V bit. Albeit a very deep V! Last thing, to remember concave vs convex use this mnemonic, a cave is a hole in a mountain. It goes in. Again, great video! I'm subscribed! So keep them coming.
@GearheadDaily
@GearheadDaily Жыл бұрын
Thanks! I find this method much deeper and tighter of a fit. Hopefully you do too!
@billcedarheath387
@billcedarheath387 2 ай бұрын
Stars! I just discovered your channel and glad I did. To help you along, I clicked the like and did this comment thing for the algorithm. You also earned a subscribe as the info in the video is quality. End result is worthy of a gold star. ⭐️
@GearheadDaily
@GearheadDaily 2 ай бұрын
Thanks! Much appreciated, glad it was helpful
@TerrapinCreations666
@TerrapinCreations666 4 ай бұрын
I wish I could post a photo. I used your method here and it worked spectacularly!!
@GearheadDaily
@GearheadDaily 4 ай бұрын
Perfect!! Thanks for the tenner!
@jppalm3944
@jppalm3944 Жыл бұрын
Amazing clean sharp
@GearheadDaily
@GearheadDaily Жыл бұрын
Thank you sir!
@joeyhdrider9680
@joeyhdrider9680 2 жыл бұрын
Stars, subbing on this vid alone. The trash cans r just a bonus lol
@GearheadDaily
@GearheadDaily 2 жыл бұрын
HA!! Lazy man ingenuity!
@oldNavyJZ
@oldNavyJZ Жыл бұрын
Stars? More like Stares, as in I could stare at that inlay for days. Great tutorial!
@GearheadDaily
@GearheadDaily Жыл бұрын
Much appreciated :)
@delsonc
@delsonc Ай бұрын
Obrigado pelo tutorial (Thank you for the tutorial).
@GearheadDaily
@GearheadDaily Ай бұрын
Hope it helps!
@JeffSolenberg
@JeffSolenberg 2 жыл бұрын
Stars - Excellent video. I've spent hundreds of hours researching cutting board inlay methods and beating my head against the wall for months. Although I think I finally found some settings that work, I really like your method and I can't wait to try it. You've managed to solve all of the problems and at the same time, simplify the instructions. Great job!!!
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Very welcome!
@ClintonCaraway-CNC
@ClintonCaraway-CNC Жыл бұрын
People have issues with it due to bad advice. This method never fails. kzbin.info/www/bejne/m6eqkquJp5yZaM0
@alexbordo4449
@alexbordo4449 9 ай бұрын
Stars:👌👍love it. Thanks
@GearheadDaily
@GearheadDaily 9 ай бұрын
Any time!
@alanbarrington733
@alanbarrington733 7 ай бұрын
Stars. Woke up early this morning worrying about my inlay. Trying to do a double inlay. And prolly too small. The problem is that, according to common learned knowledge, I’m using a 60° v-bit. But this destroys the tail feathers on the firebird I’m cutting. Great fix you have here. But I need to try the female cut. Seems odd to use the pocket for it. Thank you.
@grzegorzryczanowski
@grzegorzryczanowski 2 жыл бұрын
stars. good info new to it myself but trying
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Thanks! Hope it helps.
@Reign_In_Blood_963
@Reign_In_Blood_963 Жыл бұрын
Thanks! Very well explained. Can't wait to try this out. Stars. BTW... your narrations reminds me lot of BourbanMoth.
@GearheadDaily
@GearheadDaily Жыл бұрын
Ha! I've been compared to a few other KZbinrs but never him. He seems like a cool dude.
@amysteryprojects
@amysteryprojects 2 ай бұрын
Thank you
@GearheadDaily
@GearheadDaily 2 ай бұрын
Glad to be of help
@vidana789able
@vidana789able 2 жыл бұрын
Stars 🌟 beautiful video i love it
@GearheadDaily
@GearheadDaily 2 жыл бұрын
I'm glad you like it
@EricEinstein
@EricEinstein Жыл бұрын
Very nice video, well done. My question is: how do you get real sharp corners with a ball-end bit?? Thanks to share your experience
@MosquitoMade
@MosquitoMade 2 жыл бұрын
Super thorough, and very helpful. Good explanation of the "Why" in addition to the what/how. I will say, though, could use a little more volume on the narrated at the computer parts
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Thanks bud! Ya, the volume didn't quite match up did it? I should have caught that. Thanks :)
@MosquitoMade
@MosquitoMade 2 жыл бұрын
@@GearheadDaily Yeah, turned it up so I could hear, and then FLLLLINNNGGGGGGG for that pop up "Oh hello!" :D
@GearheadDaily
@GearheadDaily 2 жыл бұрын
@@MosquitoMade LOL ya i got that. I thought I turned off the desktop volume, sorry about that LOL
@Mike-bo5xg
@Mike-bo5xg Жыл бұрын
stars, thanks for the tip
@GearheadDaily
@GearheadDaily Жыл бұрын
Glad it helped :)
@bguillory6675
@bguillory6675 2 жыл бұрын
stars, thanks for the video, I tried the Garrett Fromme method and though close had a part cave in probably due to gap you spoke of. Will get the amana bit and try your method. Any suggested feed and speeds for hardwood, I have the Onefinity machine also
@GearheadDaily
@GearheadDaily 2 жыл бұрын
I usually have 100inch/min seems fine for me.I take small passes through around .100"
@davehoffman9767
@davehoffman9767 Жыл бұрын
Stars,,, great job. I use easel but I am thinking changing over to vector. Its just when you get use to something its hard to change. I think you can do more in vector. Thanks
@knightreign
@knightreign 10 ай бұрын
Stars - A big thank you. Excellent, excellent video. I love the snap at the end with a little hammer tapping. Have you tested the outer boundaries of how deeply you can make the negative cut? I'm guessing it's only limited by the depth of the cut on the bit, yes?
@GearheadDaily
@GearheadDaily 10 ай бұрын
Yep, the bit is what dictates that. Usually 0.5" is the deepest I'll go with that bit.
@MichaelBlueMusic
@MichaelBlueMusic 2 жыл бұрын
Stars. 👍 I’ve been researching CNCs, inlays, etc for a year now and hope to get my first machine this spring. I’ve always disliked the “leave a huge glue gap” method and wondered if something like this would be a better option. Thanks for doing the research and providing your findings with us here!! Subscribed and liked. 👍
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Awesome! Thanks for watching and commenting :)
@daveyoung3965
@daveyoung3965 2 жыл бұрын
STARS - This is GREAT and can't wait to try it! This is very different than any of the MANY vids I have watched on this but I have a couple of questions though if you have a minute please. One is how can I increase the gap of the positive piece above the negative board to be able to cut off the excess with my bandsaw? Would that be to increase the cut depth on the positive piece a touch? Also how do you accommodate for the Start Depth if/when the cut may be deeper than the bit can handle? I've tried so many ways I cannot recall any of the exact depths I used but there were times the start depth plus the cut depth were a little excessive for my bit. Last question is how long were these cuts using the ball nose bit compared to a v-bit? The machining bit at the end seems as though it took quite a while to cut each piece. Thanks!
@GearheadDaily
@GearheadDaily 2 жыл бұрын
I hope it helps! So... 1. You can up the difference so in this case, 0.16 and .04 would increase that amount to cut off. 2. how big of a cut and inlay are you trying to make? that seems really deep. 3. Each process was maybe 1-2 min total.
@LoiePoll
@LoiePoll Жыл бұрын
Stars - Thank you so much for this video. My friend used this method to do a small inlay of the state of Texas and it worked perfectly. I tried it with a simple half moon and it is horribly sloppy. We tried it on my friend's machine and got the same sloppy results. We used your recommendations of cutting the pocket to .2 and the plug with a 0.18/0.02. We thought maybe my z probe thickness wasn't calibrated properly but when we measured it the value was spot on. Please let me know if you have any ideas why mine is not working? Thank you! Jim
@GearheadDaily
@GearheadDaily Жыл бұрын
Most likely you picked the wrong tool
@ronnorris1504
@ronnorris1504 2 жыл бұрын
"STARS" Very informative video. You make it really look easy. Will be trying that this weekend. Think that would make an awesome cutting board. What finish would be your recommendation to use to seal it? Again thanks, will be watching for additional videos.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
You can use a lot of things but most people use mineral oil and bees wax
@pakmancreations
@pakmancreations 2 жыл бұрын
Stars: First of all GREAT video! So I did a Chili Pepper inlay on a cutting board using a 15V bit. For the plug I did a flat depth of .18 and start depth of .02 while the Pocket was .20. I ran into the issue of pocket/Plug being too tight to fit. My question is, do you use pocket allowance? I didn't see you use that in this video. Or, should have I used a bigger bit (45 or 60) because the "Chili Pepper" was a bigger inlay and didn't have too much detail. I appreciate your video and responses to the comments.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
its not going to be a perfect fit and some room left over is good.
@mmlg24
@mmlg24 2 жыл бұрын
Stars. Would you say that any inlay shape would work with this method even intricate ones? Great explanation, thank you for taking the time recording it.
@GearheadDaily
@GearheadDaily 2 жыл бұрын
Yes, absolutely. this works down to about 1/16"
@Imposterstopmotion
@Imposterstopmotion 2 жыл бұрын
Appreciate this video; I've accessed it more than a few times as a refresher before designing my inlays. One thing I hadn't noticed until today, I see on the "plug" carve, you start by running your TBN, followed by your clearance tool. Is there a reason for this, or is it a function of already having the TBN in the collet and avoiding an extra bit change? Just curious. Thanks!
@GearheadDaily
@GearheadDaily 2 жыл бұрын
It's a bit of both. I have noticed that when I run the small but first, the clearance but has to work less and provides less clean up. That may not be the standard practice
@ChonkysWoodshop
@ChonkysWoodshop Жыл бұрын
Stars. I have a small cnc with a 300w spindle, so taking a 0.18" start depth pass is quite risky on my machine. Should i just split the values and do multiple passes to compensate as long as i still end at the same vales when added? Example, if i do one pocket with a start of 0.05" and a flat of 0.01" and a second pass that runs a start depth 0.13" with a flat of 0.02". Just trying to get it down with what i currently have 😅 any advice would be greatly appreciated! Appreciate the great videos!
How to Create Perfect V-Carve Inlays on your CNC
18:01
Carbide 3D
Рет қаралды 9 М.
A Redneck's guide to Vcarve Inlays.
19:09
M&S Woodworks
Рет қаралды 118 М.
КОМПОТ В СОЛО
00:16
⚡️КАН АНДРЕЙ⚡️
Рет қаралды 30 МЛН
Looks realistic #tiktok
00:22
Анастасия Тарасова
Рет қаралды 106 МЛН
Mama vs Son vs Daddy 😭🤣
00:13
DADDYSON SHOW
Рет қаралды 35 МЛН
Beautiful gymnastics 😍☺️
00:15
Lexa_Merin
Рет қаралды 15 МЛН
Inlay End Grain Boards - Lessons Learned - 316
23:52
Jay Bates
Рет қаралды 215 М.
10 Stupid CNC Mistakes I Made as a Beginner...
21:21
731 Woodworks
Рет қаралды 37 М.
Master The Art Of Flawless Inlays With This Tutorial!
28:37
STL Woodworking
Рет қаралды 8 М.
Deep inlay with full CAM process in Vectric Vcarve
28:20
Stephan Forseilles
Рет қаралды 50 М.
How To Make a PERFECT INLAY with a CNC Router, Easy CNC Router Projects
1:14:57
How to Make Trays & Bowls with a CNC
30:38
Six Eight Woodworks
Рет қаралды 122 М.
How to Make an Inlay Cutting Board with CNC|How to Make a Cutting Board
10:03
Advanced V Carve Inlay Tutorial
11:06
Chris Powell
Рет қаралды 52 М.
Beginner's Guide to a PERFECT Inlay with a CNC
15:38
STL Woodworking
Рет қаралды 10 М.
Суперкар DS на 1400 л.с.
0:46
Vladione
Рет қаралды 1,3 МЛН
Машина Жириновского.  #shorts Лиса рулит
0:52
Лиса рулит shorts
Рет қаралды 6 МЛН
I Parking My Car 😂 #shorts #funny #viral
0:11
Funny Club TV
Рет қаралды 4,9 МЛН
tractor rear light project #project
0:40
SB Skill
Рет қаралды 14 МЛН