How To Custom Paint a Motorcycle

[@toshiomatsuzawa8290]

New Video!!check this out! How To Custom Paint a Motorcycle【4K】 kzbin.info/www/bejne/aXe1eaJ8ZbmiidE

[@Allworldwalking]

Plz my new ID mentions your discrimination @ali modification 95

[@mikejones-go8vz]

Let this be a lesson to future demo videos, no music, just natural sounds watching a very skilled craftsman

[@dazthemod69]

I’ve commented on this before, but another won’t hurt. An absolutely fantastic piece of work. Reasonably simplistic graphics turned into a work of such deep, beautiful perfection. You are truly a master of your art.

[@captnhook236]

FANTASTIC work bro!! Been doing custom work for years and you made this look so simple when in fact it is NOT!! Hats off to you!! NICE WORK

[@jamiegraham6125]

I came here looking to get the crinkle effect and boy o boy did I learn!!! What amazing work you've done there and the attention to detail is beyond measure.

[@toshiomatsuzawa8290]

Thank you for watching.

[@BlueMarbleRider]

Toshio: words fail me. Just when I think you are finished, it surely couldn't get any better, you take it to another level. You are an artist

[@michaelwebb8788]

Beautiful paint work! Thank you for the video. Two questions: 1) How long do you leave the plastic wrap on before peeling it off and how long did you wait for the paint to cure before you did the final buffing?

[@aaarghwilson]

Absolutely lovely work Toshiro! May I ask ask a couple of questions: How long should you wait before you spray on each stage (base coat to silver, clear coat, wet sand, candy, wet sand, final clear coat). What grade paper should you use when you wet sand between each stage? I 'm going to attempt something similar (but a bit simpler!) on my tank so the less mistakes I make the better! Thanks!

[@edhog]

Is the black paint allowed to dry before he application of the silver? How long does the wrap stay on for?

[@Profabdesigns]

This is why some bike are so sharp looking. Absolutely stunning! Probably 45-50 hrs to paint and finish this. Amazing results.

[@toshiomatsuzawa8290]

Thank you verymuch!

[@larrywhalen127]

Toshio, this is the Best tutorial I've seen on how to do a custom paint job, and your workmanship and finished product is as fine as anything I've ever seen. I painted at Anaheim's Disneyland for over a decade until my throat was damaged from the Isocyantes in the paints we used in our spray applications; i was fortunate to have caught it in time because without the proper mask, a fresh air-supplied respirator, you can develop throat cancer which can do its magic on you in four or six months, and I noticed you use a dual charcoal filter 3M style paint mask - which does nothing to protect you from Isocyantes since they are sub-microscopic and go through the filters like they aren't even there. You are extremely talented and I hope you take some time to find out about the danger of not having the proper mask, and your paint supplier should be able to bring you up to speed on this subject, but if not contact me because I also taught how to use these coatings when I worked at Stits Aircraft Coatings for six years before I went to Disney. Once again, Best video I've seen on how to properly paint something which could be right at home on a mantle in your man-cave or on your motorcycle. Thank you for taking the time to share.

[@bondpowers7295]

Hey thanks for sharing this knowledge I have slight damage in my throat I will now use a fresh air supply mask, you never know how many lives you may have saved by sharing this knowledge maybe even mine, GOD bless you. We shouldn't be ignorant of these things when working with chemicals but we are

[@hydorah]

So much time, effort, creativity and skill! Thanks for showing us. Looks justifiably expensive, results are simply stunning!

[@toshiomatsuzawa8290]

You are welcome!!:)

[@danielrutkowski83]

@@toshiomatsuzawa8290 Can you tell what silver paint to use to get such a wonderful effect. It's about what silver paint on the black layer. Whether it's chrome paint or silver paint

[@Gamer-ox6tg]

You sir have talent. This is some of the best work I've ever seen. Keep up the excellent work!!!

[@endofthebeginning7648]

Amazing finish and a good lesson on how to achieve it (in time) a long time I think but nice to see what results can be achieved with patience Cheers

[@cupelnorway6960]

Probably some of the best I've seen. For a craftsman, we do not have such people in Norway. This was amazing!

[@camillosteuss]

Indeed, as most comments attest, yours is truly amazing work... Most people bitch about how expensive the paintjobs are, but they fail to account the artistry that work like this takes, time that art takes to develop and learn, the work in preparation, the sniffin' of glue(paint thinner) that you go through and the finesse that the final result requires... Also, a nice idea as to how to rotate the piece you are working on... Thank you for sharing this artful demonstration with us peasants among which but a few can paint a wall in a single color with a roller... This is quite an inspiration for us who are inclined towards this kind of work! All the best my dear brother from across the planet...

[@ImmaShadowGirl]

This is amazing! It's art in it's most beautiful form! Mind blowing!

[@shubhkantjain7888]

ImmaShadowGirl u are even beautiful

[@NadirAli-dq2sv]

ImmaShadowGirl like

[@NadirAli-dq2sv]

ImmaShadowGirl hi

[@mohibulislam2564]

Hi

[@ابوردادالعلاط]

ا

[@rlara2k7]

Amazing, you sir have mastered your craft bravo!

[@fahimbinnaseem1549]

After so many days, got something fantabulous in my youtube recommendations... Great work sir..loved it❤👌👍👏

[@richardadams1337]

Toshio, you did a fantastic job and demonstrated why patience is so important. Many layers of paint and clearcoat, sanding. QUESTION #1: After you put the clear wrap over the silver to create the wrinkled/marbled effect, how long do you wait before removing it? Immediately, after a few minutes but before the silver dries, or wait for the silver to dry? QUESTION #2: What brand of paint and other products are you using and what are your mix measurements of all the different layers. Thanks again for sharing your tremendous skill. I look forward to your answers. Rich

[@markmergatroid2348]

Yes, first class workmanship. Congratulations.

[@chrissbanzai]

This is no painting... this is art in hi level!!! 🤙🤙🤙

[@diyautoschool]

Great Marblizer Job! It really came out nice... Your a picky guy and your work shows that your proud of what you do!

[@toshiomatsuzawa8290]

diyautoschool Thanks for checking my movie!! :-) Korekaramo,ganbarima--sususu :-)

[@toshiomatsuzawa8290]

diyautoschool I'm checking yoiur channel and enjoy it!! tanosiminisiteima-su:-)

[@gerardonesta7592]

Toshio Matsuzawa quando costaaaaaaaaaaaaaa!!!!!!???????? ?????

[@dhanapalmdhanapal3640]

D.I.Y. AUTO SCHOOL

[@rogercolvin7964]

Awesome work you should be very proud that was one of the best paint jobs ever

[@paulstoolbox]

You are incredible Toshio, thanks for the lesson!

[@andrespoveda2358]

Dfhhxggvflpuhijxc

[@domenico7837]

Wow! This has to be me of the most AAAAAAMAZING paint jobs ( & methods) I have ever seen! I come from the state that started Lowriding PERIOD (Espanola, New Mexico) & I am blown away by this paint job! You are truly bad ass & talented! Shout out from Albuquerque, New Mexico! 🇪🇸🇲🇽🇪🇸🇲🇽🇪🇸🇲🇽🇪🇸🇲🇽👏🏼👏🏼👏🏼👏🏼👏🏼👏🏼💯💯💯💯💯🔥🔥🔥🔥🔥🔥🖤💚❤️🧡💙💜💛

[@Pp-cd3me]

I was so hyped trying this on my motorbike. But as only a starting amateur i've tried it first on my bicycle... With some finetuning it's much fun! I'd advise to try alluminium foil too; it's easier to crease in advance. Give's a nice effect. Only be carefull to tore it quickly. Still learning, but fun to do! Thanks Toshio Matsuzawa

[@danielmayoralm]

Hey man, great work. I got a question: did you wait for the silver paint to be dry before removing the wrap?

[@lichaelvillanueva1378]

this is what i want to ask too.

[@danielmayoralm]

@@lichaelvillanueva1378 I already did this painting stylyand you don't have to wait

[@lichaelvillanueva1378]

@@danielmayoralm oh ok thank you

[@ThaiLitzki]

@@danielmayoralm curious, did you / he wait for the base black to dry completely as well or just 20-40 min?!

[@mrdirtdart2239]

That's not a "custom paint job..." THAT is a, " WORK OF ART !! " arigatou gozaimasu!

[@wattzmonster583]

Damn! That looks exactly like crushed red velvet. Absolutely Amazing!! Would really love to see more new videos of your artwork. Keep Rockin & Ride On!

[@hrobertb]

Incredible job. I love the plastic wrap trick you used.

[@kumarmvs723]

First time I wached this artistic job , believe me I was introduced to this paint world we are normal daily routine job holder s but this amazing skill needs lots of pacience and imagination, every field is ocean it's up to you how much you can dive, I respect every individual skill. Thanks love you

[@ahmadnabil9258]

Nice tutorial. It teach me to leave painting works to the professional. Thanks.

[@claudineigomes6614]

cora que lindo trabalho você faz, gostei muito da cor azul e também da vermelha meus parabéns.

[@dominikscharf4039]

Holy shit, this is amazing work! I‘ll never could hold my hand so still for the black line. Love it, looks so beautiful 👌🏻

[@jimgamble2429]

I’m blown away....true artistry.....🙏

[@carlsmith7596]

Great work did you let the paint dry before removing the film ?

[@lomaximo01]

what was the blue liquid you used to remove the paint? great video by the way

[@toshiomatsuzawa8290]

the name of the paint stripper is called paint remover.

[@ArmandoHernandez-gc7lb]

Flaco Valdez .

[@sukrosukric5729]

Toshio Matsuzawa man u are insane! what a work! great job!

[@wingbutler]

Ah, that's what it is.

[@JohnSmith-sf8gj]

Absolutely beautiful. But do you always rub the bare steel tank with your oily bare hands before painting?

[@jamsstar2010]

Yoda hands

[@HowToPaintYourCar]

Great job man

[@sayyedwasim2368]

BOSS PAINTER - Learn Auto Body And Paint! I'm

[@MrDjzaga1]

A tue artist that is so confident that shares how it does his art, Respect

[@BobCoxUK]

ABSOLUTELY BRILLIANT WORK !!!!!!!!!!! FANTASTIC,,,,,,,,Greets from the UK.

[@danielviveiros1773]

Truly amazing, thank you for showing us. Your work is a beautiful Art.

[@darrellgreenway791]

I'm working on my 1957 panhead harley and I'm gonna be painting it next month. I would like to use the blue on my scooter if that would be ok with you. That is absolutely beautiful

[@TheGunmanChannel]

Amazing work

[@bobbygrey5859]

Awesome!!! Extremely nice work thanks for sharing your talents to the masses.

[@gregghatfield9946]

Can I ask,,, with the factory paint being very nice ,, why can’t you use that and sand and paint on top of that? Wouldn’t that be tuff r to chip?? Beautiful paint lay

[@scootmotoshop]

Well done job. A question, i tried to paint black and dried, then i paited silver and immediately wrapped but when i tried with hands to create the lines of silver like you it is impossible to get the same as you. Can you please explain to me a little, should i dry black then paint silver or how

[@larell001]

That is a very meticulous paint job awesome!

[@toshiomatsuzawa8290]

Larell Mack Thank you!! I'll do my best!

[@sagarbajpai6397]

nice job...... what did you use to take out the paint.....

[@frunabulex]

Brilliant art!

[@jaliscoguanajuatotravelsan5679]

That is an art. You are truly gifted

[@toshiomatsuzawa8290]

arigatoo

[@RolyEm]

Lovely work Toshio - I used to own a blue Zephyr 1200 back in the day - your paint job would have looked brilliant - regards from the UK

[@yojojo8260]

You are a genius

[@rodrigomartinelli741]

Beautiful work ! thank you so much for sharing your technique !

[@rodrigomartinelli741]

Quick question.. when do you remove the sticker.. right after laying the paint or do you let it dry a little ? thanks !

[@geekiejesus8482]

これは驚くべきことです！イギリスでは川崎のようなものを見たことがない

[@durvalfilho8506]

Beautiful work, congratulations. is it possible to do it in white instead of blue / red?

[@MegaMikeyyyy]

Hi what candy red did you use? Was it a ruby red or light candy red ? Thanks amazing job

[@leonwangls]

show the full bike

[@SprayWayCustoms]

Perfect Finish !!!!!!

[@udoschwarzfischer8841]

SprayWayCustoms

[@leandrolorenzzini8270]

muito bom o seu trabalho parabéns!

[@laerciosilva4353]

Leandro p

[@billytennant913]

So good to see a expert at work, this is brilliant. I am restoring archery bows and was looking for new ideas, will use this, thanks

[@cedricletourneur5980]

Amazing job, Sensei Toshio!

[@JamieBroughton70]

freaking amazing work of art.would love my harley in that blue and silver.

[@jonasbatata1365]

maravilha!! tenho vontade de aprende essa arte linda!

[@FrustratedBaboon]

I just gave up after watching this. I cannot do this what so ever.

[@1thcorg]

You can do anything you set your mind to.

[@daniellucas1039]

Hola maestro me gusto su trabajo bueno le escribo porque me gusto su trabajo lo primero que quería preguntarle es que le tiero al principio y esa funda de que es

[@GothiczHouseOfKustomz]

great job, old vid I know, but what clear did you use over the silver paint, in my experience clearing silver, has always turned it to a dull aluminum look, so please tell us what you used....

[@bobstout5577]

Never touch a surface prepped to be painting with your bare hands! Don't do it! Just sayin!

[@reconstrucdead1]

Shit that is beautiful...... I would be affraid when refueling not to drop petrol on the paint

[@Ladosligese]

you are always careful not to drop gas on the paint :D

[@angry-white-men]

I've dropped gas on my paint many times, doesn't do anything unless you have a cheap paint they used

[@mikemaloney8397]

I want you to paint my bike

[@X-l-HAD3Z-l-X]

He put like 30 coats of paint on it lol and if he used a good clear coat which im sure he did then gas shouldn't do anything unless you let it sit on the paint

[@bonniegev1100]

Master an edge...👍

[@bramvandepoele7913]

Would it work to use the current paintjob of my tank as a color for the details by using masking tape and spray over it with another color or won't the new paint stick well to the current paintjob?

[@giomarcos4438]

Awesome!!! Can it be done using spray can?

[@jacktomaszewski]

How do you suggest I should prepare my painting space? Main issue are tiny dust particles in air that like to stick to the surface.

[@grumpybaztard4930]

Dude that is one sick paint job !! Well done !

[@toshiomatsuzawa8290]

👍👍👍

[@ivenstein]

wow awesome work!!! how do you strip the old paint? what's the product?

[@BalletNYBahiri]

beautiful.... WHat's the average cost for a custom paint?

[@gregw_729]

What did you put on the paint to melt it all off? Beats my method of sanding

[@joeespinoza6995]

need to know as well

[@rogerboggs7775]

Go to a Napa store and ask for 6802 ammonia paint stripper wear gloves and don't get it on your skin burns like hell. Use water to clean up the surface

[@joewarnock19]

What kind of paint do you use? Can you use enamel or water or just oil based?

[@brunopaula2913]

good morning friend, could you tell me what is this plastic you use to make this effect? the result was top, congratulations, I speak here from Brazil, hugs.

[@toshiomatsuzawa8290]

I use food wrap. thank you!

[@THRobinson]

Do you peel off the wrap when the paint is wet or dry? And what typ of paint is being used?

[@gudgen2004]

Do you peel the cellophane away immediately or do you wait for the paint to dry???

[@Justduit777]

Why do you have to give clear after wrap paint, and blue candy afterwards? Thank u

[@davidker7256]

hi all, loved this idea so much i tried it on my father in laws cruiser, to answer alot of questions on here about how long to leave the cellophane or cling film on for i left it for at least half an hour checked abit and left another ten mins. was drying in 30 degrees heat. takes a while due to no oxygen to the paint. then i clear coated it. project still ongoing.

[@toshiomatsuzawa8290]

Thank you for your comment. I hope it goes well.

[@HammyHunting]

Although I don’t have a motorcycle I can appreciate the time effort and skill that went into producing that work of art, hope the owner of the bike does 👍🏻 Excellent video

[@majbennett]

Did you have to sand that gold leaf at all to get the clear to bond to it? Or did it just naturally bite into it?

[@luigifasulo3316]

Hi, how long did you leave the plastic wrap on fresh paint before remove it? Should be the silver paint dry before remove the plastic wrap? Thanks Gigi

[@flowki4904]

Hi, Good work, its very Nice. Whats type of product did you used to remove the old paint in this vidéo

[@rasmuslind9338]

How dry was the black paint before you applying the silver paint

[@sayak7712]

Sir please if u tell me the time of rap up those plastic. How much time I have to rap up plastic on the tank and in which time I have to rap up plastic.

[@albertifergan6506]

Beautiful, how long did you wait between coats. Also for the clear how long did you wait ? Thanks,

[@SudhanshuHACKER]

lots of hard work in making this video.May God bless you.

[@jasonmcpherson4274]

Toshio what brand of paint products did you use? I looked at description and wondered did you use house of colors candy? Two thumbs up. I have an 83 goldwing that i want to accomplish same marble candy burgundy paint scheme. I like gold leafed design. Thanks for inspiring.

[@lichaelvillanueva1378]

i just want to ask. what did you put as glue to the gold leaf? is that also paint?

[@sujanprakash2345]

Great work. But when should we remove the plastic wrap, after drying of sliver or before drying

[@vnitmechite2003]

The fine line vinyl tape which u have used.... Is it 3M tape? Do we need to use 3M fine line vinyl tapes for such tank jobs? Can u suggest any other good brands to me ..please

[@timmytexlonghorns2206]

what thickness gold leaf did you use? I've never seen anyone handle it without it sticking to the person applying the leaf

[@danhealy79]

I really liked how you use the gold leaf, very nice and lovely colors!

[@renatosantos631]

Olha adorei a pintura customizada. Tou querendo pinta a minha 150 sporte da honda, so que nao sei quais os nomes dos liquidos que e pra comprar pra fazer a mistura com a tinta vai ser um vermelho candy cromado. E ae o que fasso agora? Mim ajuda! Um abraço...

[@snowtracusa]

Toshio, you need to post more videos of your candy and metal flake work, you are a PHENOMENAL ARTIST.......

[@wraithvendeta]

I love this. What grit did you use to wet sand?

[@Nioniosoflou]

Hello , Great job :-) Mindblowing paint , thats why i am trying to do it by myself.. Could you please help me ? My silver color its hardern to fast , and when i wrap it i cannot do the nice and smooth '''marbel effect'' . could you please help me why is that happening.? Thank you for your help :-)