Рет қаралды 6,832
Follow along while we carve this miniature Stratocaster Guitar using our A-Series CNC!
This project was carved on 2"x4"x.375" End Grain Oriented Walnut and Maple, but you can redesign this file to whatever parameters you prefer!
Bits used in this project with corresponding Feeds and Speeds:
- Roughing Pass: .25" Down Cut Endmill. 1,800 mmPM, 24000 RPM
- Finishing Pass: 1/32" Tapered Ball Nose. 2,000 mmPM, 22000 RPM
- Profile and Pocket: .125" Down Cut Endmill. 1,800 mmPM, 24000 RPM
Download The Free 3D Model Here: 2enw42b5.sibpa...
Double Sided 3D Cut Tutorial: • How To Set Up A Double...
Download the Pre-Cycle Start Checklist Here: drive.google.c...