If interested in purchasing this product, visit our Amazon affiliate link below below. I earn from qualifying purchases. amzn.to/3lTOZAE 😎👍
@sheepinwolvesclothing11353 жыл бұрын
I know I'm late to the party but this worked like a charm, it was tricky to get it to the next blade once it cut through but with the right pair of gloves, a little technique and a wiggle wiggle! Worked beautifully.
@DIYwithMichaelBorders3 жыл бұрын
Awesome Awesome & thanks for watching as well as sharing this. Hopefully many stress free days ahead for you. 😎👍🔧🔩
@dustincmills6 жыл бұрын
No pipes were cut in the making of this video
@DIYwithMichaelBorders6 жыл бұрын
Dustin C Mills Thanks for checking out the video and sharing your comment Dustin. We have had great luck with this tool. Definitely gets the job done. Unfortunately at the time, we had no pipes available to cut. Sorry about that Dustin. Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again 😎👍🔧🔩
@NoWr2Run6 жыл бұрын
You were cutting one in your hand ? If you didn't as you said NO PIPES TO CUT ? WHY IN THE HELL DID YOU MAKE THIS VID. ? CHRIST.
@dementedbowine86815 жыл бұрын
@@NoWr2Run the pipe needs to be unabel to rotate in order to use these cutters
@NoWr2Run5 жыл бұрын
What does it matter if the tool turns or the pipe turns, he was turning the pipe in his hand ? Either way the cutters will cut ? But he failed.
@dementedbowine86815 жыл бұрын
@@NoWr2Run if the tool is turning the pipe its not cutting and you cant hold the pipe well enough by hand to use this tool you need to have the pipe clamped somehow. Blades of the tool need to rotate in order to cut the pipe. kzbin.info/www/bejne/r6ramZiPgNZ_bJI take a look at the video just to see how hard is it to cut pipe while rotating or holding it with your hands
@johngranato26734 жыл бұрын
The problem with most of the "chain and wheel" cutters is that the wheels are often not yet through the pipe and the links or the wheel "axles' or the attachment points (fixed and slotted on the vise-grip-style cutter) often contact the pipe before the wheels have cut through. A simple solution would be to manufacture the wheels at a larger diameter. In this way, the chain-links and chain attachment areas are far away from the surface of the pipe. Also, the chain-style cutters often jam due to the fact that the handle will rock and cause the chain to pinch the pipe (as a result of the leverage exerted on the handle)--much in the same way that a chain-style oil filter remover tightens around the filter.
@DIYwithMichaelBorders4 жыл бұрын
John Granato Thanks for watching & sharing your thoughts John. That’s awesome! 😎👍🔧🔩
@s4f4m782 жыл бұрын
But you can then finish it off with a motorized recip saw. Nice that there are tracks to follow from this tool.
@MichaelPoage6662 жыл бұрын
Yeah, I've been fighting this stupid tool all day. Not only do the axles get in the way, but the whole tool tends to fall apart. The links won't stay on the axles and all the wheels start leaning to the side and stop cutting. I should have just rented a sawzall.
@stuartwinstanley4949 Жыл бұрын
@@MichaelPoage666 same 😏
@johngranato26733 ай бұрын
@@s4f4m78 Yes, but
@sendit91294 жыл бұрын
Fun trick that my grandpa taught me: Nail clippers are made of Tungsten, one of the hardest metals on the market, much harder than carbon steel. If you use the sharp side of the clippers to etch your cutline into the exhaust and simply hit it with a hammer, it will break into a very clean cut. I haven't used a saw in years, and my exhaust work takes half as long!
@DIYwithMichaelBorders4 жыл бұрын
Send It Thanks for watching, clever trick. 😎👍🔧🔩
@jeff_carnelas96813 жыл бұрын
Using a hammer and nail clippers while under a car may not be the easiest for some but cool trick I need to see it
@luhhdj12 жыл бұрын
Could u make video showing us how to do it
@TonyTundra5.72 жыл бұрын
Nail clippers are not made from tungsten, regular 4130 steel if your lucky.
@codyhatch46072 жыл бұрын
@@TonyTundra5.7 And his nail files are made of titanium coated in 200 carrots of hope diamond off-cuts.
@isaackauffman54782 жыл бұрын
This is how you secretly remove your muffler without your parents hearing. Much quieter then a sawzaw.
@beadlebamford99993 жыл бұрын
What he didn’t tell you is that this method will take 2 hr per cut. And your arm will be dead halfway through. Sawzall.
@jackgaffney8468 Жыл бұрын
Yeah I just realized that after 15 mins with minimal progress and I have two pipes that need to be cut. No thanks. I’ll use my electric saw next time and do it in 30 seconds.
@donniev8181 Жыл бұрын
Maybe if you're weak and lazy, 20 mins tops for normal men.
@jackgaffney8468 Жыл бұрын
@@donniev8181 BS I did it for 20 mins and barely made any progress. Strength has nothing to do with it either.
@nxrblaster Жыл бұрын
Bs I did it in in like 20 minutes In the harbor freight parking lot 😂
@nxrblaster Жыл бұрын
@@donniev8181ikr 19 had a muffler issue took it off in the parking lot 20 minute
@TheOneJPtv7 күн бұрын
Thanks. I was using a cut off wheel. your way looks way easier.
@chriskubond63145 жыл бұрын
Thanks for the video. It really got me out of a bind!
@DIYwithMichaelBorders5 жыл бұрын
Chris Kubond Thanks for watching & we are happy the video helped. We really enjoy making these helpful videos for our fellow DIY’ers. 😀 Many more helpful DIY videos to come! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@codycapron64613 жыл бұрын
Lol me too
@mrsam82504 жыл бұрын
Just found a new way to cut big diameter copper. Thanks 👍👍👍
@DIYwithMichaelBorders4 жыл бұрын
Mr Sam Thanks for watching. Let us know if you have any questions. Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@jldude843 жыл бұрын
I know they make a similar little tool for regular copper pipe, do they not make one specifically for bigger copper?
@denniscarparts22946 жыл бұрын
Thanks bro, i went an rented one. That thing made my life so easy putting on this exhaust
@DIYwithMichaelBorders6 жыл бұрын
Leroy Dennis Awesome Awesome thanks for checking out the video and sharing your comment Leroy! Glad to hear you rented Tool & made job easier! Let us know if you have any additional questions along the way we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! 😎👍🔧🔩
@mathewroson99704 жыл бұрын
How much was it to rent
@thetexastickler Жыл бұрын
Time to get my rent money
@Danny1219887 жыл бұрын
Looks like it takes a little force. Strong with the force I am not.
@DIYwithMichaelBorders7 жыл бұрын
Daniel DeJesus Daniel, thanks for checking out the video. Never easy is it haha...I've had pretty good luck with this tool. I will add though, it's far easier to use this tool if the car is resting in a lift and you can stand while cutting and getting more leverage rather than laying in the ground. Please Subscribe to the channel that would be awesome thanks again 😀👍
@NoWr2Run6 жыл бұрын
The problem with these are the handles are so wide when cutting bigger pipe it's a bitch to squeeze, buy the vise grip one if you can no constant squeezing involved.
@WorldEagleKW7 жыл бұрын
Good video. With a good microphone the quality of your video will go up a lot.
@DIYwithMichaelBorders7 жыл бұрын
WorldEagleKW Thanks for checking out the video. Hope it helps. I have worked on the volume & clarity over the months. Definitely doing better haha! Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again 😎👍
@CheesebeanGaming2 жыл бұрын
You forgot to mention to just use a sawzall. These tools are fucking garbage. Bends and falls apart and hasn’t even made it through the exhaust yet.
@DIYwithMichaelBorders2 жыл бұрын
Thanks for watching & you are spot on, a sawzall speeds up the process for sure. 😎👍
@joeyrangel228 Жыл бұрын
Now we can steal catalytic converters without a sawzall
@DIYwithMichaelBorders Жыл бұрын
Thanks for watching.
@quanathan7 жыл бұрын
you're so calm
@DIYwithMichaelBorders7 жыл бұрын
quanathan 😀 Thanks! I'm glad you checked out the video. Subscribe to the channel that would be awesome! 😀👍
@sage410.....3 жыл бұрын
Thanks for the great video I'm about to go chop up my exhaust on the bike It's way too quiet
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & we appreciate you reaching out to us, enjoy yourself. 😎👍🔧🔩
@AlDim0006 жыл бұрын
The "easy" way. You can just buy a proper reciprocating saw and be done with it in seconds.
@DIYwithMichaelBorders6 жыл бұрын
AlDim000 Thanks for watching! This is a quick easy way to cut pipe. The cool thing is you can rent this tool from AutoZone for free. We hope the video helped! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! 😎👍🔧🔩
@meowtran41175 жыл бұрын
But free is free
@dementedbowine86815 жыл бұрын
this leaves a cleaner cut and its quieter if you have asshole nighbors this is the way to go
@SUP3RDRUMM3R5 жыл бұрын
@@dementedbowine8681 If you have asshole neighbors... why are you cutting your exhaust? LMAO
@Xarai4 жыл бұрын
i got an allsaw and it didnt cut shit. it literally just dusted the rust off thats it
@marc9283 Жыл бұрын
Do you need to use lube ok the pipe or hobij dry (pun intended but I really want to know lol)
@JohnKaufmann7 жыл бұрын
Thx man. Gotta put some cherry bombs on in the morning. Neighbors will love them!
@DIYwithMichaelBorders7 жыл бұрын
John Kaufmann Oh man that's cool. Thanks for checking out the video. Subscribe to the channel that would be awesome 😎👍
@JohnKaufmann7 жыл бұрын
No problem,. Please check mine too
@DIYwithMichaelBorders7 жыл бұрын
John Kaufmann I just Subbed thanks again 😎
@DIYwithMichaelBorders7 жыл бұрын
John Kaufmann Dang you got some pretty cool videos restoring!
@JohnKaufmann7 жыл бұрын
Michael Borders thanks man! learning as I go. It's only money right?
@josheichholz16664 жыл бұрын
That is a bitch and a half to use if you're doing 3-inch pipe or higherjust to let you know because I'm struggling with it right this momentall it wants to do is keep skipping over the line and cutting a new line it will not stay in position because I can't clamp it down the handles like someone else said are just too far apart. I'm trying to devise something right now like a c-clamp or something that will hold on to this son of a bitch
@FRANKS841 Жыл бұрын
You were so useful thank you I appreciate it now I know how to use it
@DIYwithMichaelBorders Жыл бұрын
Hey what’s up, thanks for watching & sharing this. We are looking forward to hearing back from you on how it worked. We have since then graduated up to a Craftsman battery powered Sawzall. Below is a link to the one we purchased. amzn.to/3C14azx We love it. If interested in purchasing this product, visit our Amazon affiliate link above. I earn from qualifying purchases.
@neilufe3 жыл бұрын
Your awesome thank you diy is the best. Saved me a lot of money
@DIYwithMichaelBorders3 жыл бұрын
You are very welcome Noel. Thanks for watching. Us fellow DIY’ers need to stick together! Many more helpful videos to come. Enjoy your night. 😎👍🔧🔩
@louisaugust18155 ай бұрын
I don't see how this works while the exhaust pipe is still on the underside of the vehicle. You wouldn't be able to rotate the pipe cutter all the way around the pipe.
@DIYwithMichaelBorders5 ай бұрын
Thanks for watching. You do have the option to loosen the pipe clamps to lower pipe for better clearance.
@dementedbowine86815 жыл бұрын
omg people are stupid great tool. One time i wanted to help a friend repair a fence he had neighbors who were assholes and were making noise complaints just to make his life difficult so i brought a pipe cutter with one blade and 2 rollers because it was super quiet . I did not realize how much it wanted to role the whole pipe till i tried it in the field thankfully my friend had adjustable pliers we were abel to use to clampe the pipe down by twisting rope around the handels and we finished the job with next to 0 noise. Lesson from that is if you are gonna use roller pipe cutters you need a clamp.
@DIYwithMichaelBorders5 жыл бұрын
tim bum Thanks for watching, we hope the video helped! We love this little tool & it’s an awesome tool to have in your toolbox! Let us know if you have any questions, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@taje0177 жыл бұрын
Can this be used to cut exhaust tip to get it off the exhaust pipe?
@DIYwithMichaelBorders7 жыл бұрын
Definitely! I have had great luck with this tool. You can even rent it from AutoZone and use it....then return it .....and you cut the pipe for free :-) Please Subscribe to the channel that would be awesome thanks again!
@EazymoneyBicch3 жыл бұрын
This video just earned u a sub. Ur a genius
@DIYwithMichaelBorders3 жыл бұрын
We appreciate you reaching out to us. Thanks for watching, we just subscribed back to your channel. Hope all is well. 😎👍🔧🔩
@Ghost-nw7kr6 жыл бұрын
First of all thanks for the video iv liked and subscribed. I need to cut 3.5". Is this tool capable of that and If so which one is it thanks.
@DIYwithMichaelBorders6 жыл бұрын
Gaurdian66 Dattilio Thanks for checking out the video and sharing your comment. This tool is awesome & will definitely work for you. The best part is you can rent it from AutoZone for free. Let us know if you have any additional questions along the way we are here to help! Thanks for subscribing. 😎👍🔧🔩
@jldude843 жыл бұрын
Seriously? I just went and bought both a hacksaw AND a cutoff wheel for my battery drill to do this job. Had no idea this existed lol
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching, sounds like you have added a few awesome tools to your toolbox though. We have had great luck with this tool. Let us know if you have any questions, us fellow DIY’ers need to stick together! Hope all is well. 😎👍🔧🔩
@jldude843 жыл бұрын
@@DIYwithMichaelBorders Ya I tried to find an AutoZone that loans this tool, the 3 nearest to me (in Arizona) don't loan it but only sell it, so just thought I'd inform your viewers.
@DIYwithMichaelBorders3 жыл бұрын
@@jldude84 We appreciate you sharing. 😎👍
@1998gst46112 жыл бұрын
@@jldude84 Dude not every Autozone rents out that tool
@smuggeler3 жыл бұрын
Trust me just buy a cordless sawzall and put a thick towel over it . Bought this tool it sucks
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & sharing your thoughts & advice. We appreciate you reaching out to us. We have always had great experiences with this tool. Hope all is well. Let us know if you have any questions, us fellow DIY’ers need to stick together! 😎👍🔧🔩
@anav1404 Жыл бұрын
Thank you. Great video 😊
@__diegoortega__2 ай бұрын
Good luck, under a car with a 3inch heavy duty pipe 😂
@BSB29923 жыл бұрын
Would this work well when stealing cat converters? Asking for a friend.
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching. Hope all is well. 😎👍🔧🔩
@austindunn42123 жыл бұрын
Better than a angle grinder. So I’ve heard
@DIYwithMichaelBorders3 жыл бұрын
@@austindunn4212 Thanks for watching. 😎👍🔧🔩
@OGbqze4 жыл бұрын
Cool, thanks for the video!
@DIYwithMichaelBorders4 жыл бұрын
Og Bqze Thanks for watching & we hope you enjoyed the video. You are very welcome. 😀 Let us know if you have any questions. Many more helpful videos to come. 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@thomaslockley9455 жыл бұрын
Is cutting wheels all around the chain or just were you grip
@DIYwithMichaelBorders5 жыл бұрын
Thomas lockley Thanks for watching & sharing your question. The cutting rollers are around entire pipe as they cut. Pretty cool tool. Let us know if you have any additional questions. We hope the video helped. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@salty_terminal_civilian53743 жыл бұрын
I'm cutting a 2.75 pipe and I'm fuckin dying. Not a lot of space and I've got zip ties gripping the handle....
@mahlonkarpaiya2527 жыл бұрын
you didn't cut the pipe did you?
@DIYwithMichaelBorders7 жыл бұрын
Thanks for checking out the video. I used this cutting tool to cut the exhaust pipe on a 1995 Toyota Celica. Worked pretty well. Subscribe to the channel that would be awesome! This tool can also....and unfortunately...can be a pain in very tight places under car. Works so much better when vehicle is on a lift.
@OGWanderingNomad5 жыл бұрын
I came to this to find out how some one could cut my stock exhaust in my apartment complex without getting noticed. Nice to know there are tools out there that someone can wiggle under a stock height tundra and not make noise. Left and Right Descending 02 sensors chopped to where i can't patch, Left Cat pipe to muffler, and muffler piping cut.
@DIYwithMichaelBorders5 жыл бұрын
Elizar Ortiz Thanks for watching & we hope you found the video helpful Elizar. Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again. 😎👍🔧🔩
@jkitch4192 жыл бұрын
@@DIYwithMichaelBorders I know this is 2yrs old but I definitely expected u to show the viewer some compassion, the poor guy just robbed for his cats, and had some expensive components hacked up! By someone using the exact tool u just showed everyone how to use! Bro as a utuber I feel like u should definitely not have responded with that generic default comment! u probably past it in tons of your responses. And I get that, but why would u even say anything? It makes it look like u could care less what he just said and just commented back not even acknowledging anything this poor prick said . I mean how hard would it have been to respond instead real quick, tell the guy "u feel his pain and that it definitely sucks having your pride and joy hacked up like that" and maybe give him some advice on what he can do to stop it from happening to him again.. u know that's how u keep ya subs cuz that Also would have been beneficial for your channel, people would think u were a decent person..
@DIYwithMichaelBorders2 жыл бұрын
@@jkitch419 Thanks for watching & sharing your thoughts. We welcome all thoughts, comments, advice... As we tell all of our viewers, us fellow DIY’ers need to stick together! This includes any & all helpful info from viewers. If there are any questions that we can answer for you, let us know. We hope all is well with you and your family. Enjoy your weekend. 😎👍🔧🔩
@IceViper7777 жыл бұрын
just got done doing this, cut out the pipes on my crown vic. my hands are now raw meat. maybe wear gloves when you use this. it was free rental from advanced auto tho, just have to put down a deposit $85 .
@DIYwithMichaelBorders7 жыл бұрын
IceViper777 Thanks for checking out the video and sharing your comment IceViper777. Gloves definitely help haha! Were you able to put vehicle on a hoist or did you crawl underneath? Having a hoist definitely helps 😮. Please subscribe to the channel that would be sweet thanks again! 😎👍
@himynameis35842 жыл бұрын
Will this work for catalytic converters? Asking for a friend🤷🏽♂️
@laserfalcon5 жыл бұрын
will it cut the stainless pipe?
@DIYwithMichaelBorders5 жыл бұрын
LaserFalcon Thanks for watching, it should. Keep us posted on your project. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@ZiB-Music2 жыл бұрын
KZbin talk to much. Just cut That pipe en shutup
@DIYwithMichaelBorders2 жыл бұрын
Thanks for watching & sharing your thoughts...😳 Hope all is well with you and your family. Enjoy your New Years.
@michaelmcgarry26576 жыл бұрын
By the time you break though the pipe you will notice your 3 years older. Buy a saw!
@DIYwithMichaelBorders6 жыл бұрын
1 BAD CTSV Thanks for checking out the video. This tool works great...and it’s free to rent from AutoZone! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! 😎👍🔧🔩
@michaelmcgarry26576 жыл бұрын
I actually just rented it from O'Reilly's. I watched the video to find what the best way is. It really works great. Does take a little while though lol. Thank you for the video!
@DIYwithMichaelBorders6 жыл бұрын
1 BAD CTSV That’s awesome! Its definitely a lot easier if you can have the car on a hoist and get under car while standing up...better access / leverage! Unfortunately at the time...this was the only pipe I had when making the video. Hopefully you were able to get good access to the pipe. 😎👍 Thanks again for checking out the video!
@thoughtsfromaidiot59283 жыл бұрын
I actually found this video cuz I was wanting to make sure I was doing it correctly because it was taking forever.
@jamesalcantar8352 жыл бұрын
Handles bent before it even made a dent in the exhaust
@DIYwithMichaelBorders2 жыл бұрын
What’s up James, thanks for watching. You must have a thick multi-layered exhaust pipe. Most would recommend sawzall. 😎👍
@MosescxTV6 жыл бұрын
Did he cut or nahhh
@DIYwithMichaelBorders6 жыл бұрын
MosescxTV Thanks for checking out the video. Unfortunately at the time of the video, we didn’t have any exhaust pipe / pipes that we could cut off a vehicle. This tool can be rented for free from you local AutoZone. Definitely a great tool. Please subscribe to the channel and turn on your KZbin notifications that would be awesome thanks again 😎👍🔧🔩
@Beatsnmotivation3 ай бұрын
You think you can do a 4 inch pipe
@DIYwithMichaelBorders3 ай бұрын
Thanks for watching, you may consider a reciprocating saw as well. If interested in purchasing this product, visit our Amazon affiliate link below. Iron from qualifying purchases. amzn.to/3Vs8UcL 😁👍🧰
@Beatsnmotivation3 ай бұрын
@@DIYwithMichaelBorders ur awesome thanks man !!
@DIYwithMichaelBorders3 ай бұрын
@@Beatsnmotivation 👍🧰
@saintmichael27592 жыл бұрын
I bought one at Harbor Freight for about $25.00.
@DIYwithMichaelBorders2 жыл бұрын
Thanks for watching & sharing this. 😎👍🔧🔩
@gina43193 жыл бұрын
could this cutter be used to cut 3-inch PVC pipe?
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. It definitely can. Also, for your Pex pipe cutting projects, below is a link to a video that shows the Best tool to have to cut Pex pipe. kzbin.info/www/bejne/hJnFln-Lm9iJe5o Hope this helps. 😎👍🔧🔩
@stefan55952 жыл бұрын
Hello guys, anyone can help to find that tool?
@DIYwithMichaelBorders2 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. If interested in purchasing this product, visit our Amazon affiliate link below. I earn from qualifying purchases. amzn.to/3lTOZAE 😎👍
@thussydestroyer2 жыл бұрын
bro dressed like squid game years before it was poppin
@DIYwithMichaelBorders2 жыл бұрын
Thanks for watching. 😎👍
@landonbrown84823 жыл бұрын
So basically guys go in the kitchen, grab a pizza cutter or can opener. Then go crazy
@ashtonhk4 жыл бұрын
For your help that tremendously was very helpful it really made the day I got my exhaust all cut now I was doing it wrong at first and then when I watched your video now I bet I'm able to cut it right and I got it off thank you thank you again
@DIYwithMichaelBorders4 жыл бұрын
Jerame Johnson You are very welcome & we appreciate you watching. Let us know if you have any questions. Us fellow DIY’ers need to stick together! 😎👍🔧🔩
@JuanSanchez-ik7wx9 ай бұрын
FFS next time use a vice banana head
@DIYwithMichaelBorders9 ай бұрын
Thanks for watching. Another great option…and better option between the two…is using a reciprocating saw. Below is a link to our video reviewing the reciprocating saw we purchased. kzbin.info/www/bejne/mqPVfqRpn9umnKcsi=dakJtrjann2yDPTp 😎👍
@habibafaheem93123 жыл бұрын
trust me use a sawzall if you dont own one buy one… using these on mustang atm in my driveway to install tips… been cutting back forth 20 mins now taking a break half done with first one if tip will slide on
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & sorry to hear you’re having trouble. Keep us posted on your project. 😎👍🔧🔩
@habibafaheem93123 жыл бұрын
@@DIYwithMichaelBorders put it on racks used sawzall but then again my father in law told me he has used this tool... he said his tool works well but he paid $150 for his, I paid $26 for mine and he said mine was junk. lol
@DIYwithMichaelBorders3 жыл бұрын
@@habibafaheem9312 Thanks for the update. Good to know when in the market for purchasing this cutting tool. Thanks for sharing. 😎👍🔧🔩
@stuartwinstanley4949 Жыл бұрын
Does it work on stainless steel exhaust
@DIYwithMichaelBorders Жыл бұрын
Thanks for watching, you will probably want to go with a reciprocating saw as opposed to this tool. Below is a link to our reciprocating saw review video we just uploaded. kzbin.info/www/bejne/mqPVfqRpn9umnKc 😎👍🧰
@horokeu1004 жыл бұрын
here's another tip, buy thay $5 cutting fluid, cuts the pipe like butter with the tool
@DIYwithMichaelBorders4 жыл бұрын
Horokeu Usui Thanks for watching & we hope the video helped. Thanks for sharing your thoughts. We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come. 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@raczyk7 жыл бұрын
Are those small cutting wheels replaceable?
@DIYwithMichaelBorders7 жыл бұрын
razz P Thanks for checking out the video. Great question, I believe it's probably easier to just replace with an entirely new tool after the years of wear and tear take its tole. This is a pretty cool and friendly addition to your tool collection. Please Subscribe to the channel that would be awesome thanks again!
@NoWr2Run6 жыл бұрын
I think you can buy a whole new chain but it probably cost damn near as much as whole tool ?
@MichaelPoage6662 жыл бұрын
The one I got from O'Reilly's the wheels are chipping before I'm even done cutting one pipe.
@kelinjohnson74213 жыл бұрын
get the saw $25 for the saw $7 for the saw blade walmart if you on the cheap
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & sharing your thoughts, hope all is well. Enjoy your day. 😎👍🔧🔩
@kelinjohnson74213 жыл бұрын
@@DIYwithMichaelBorders same and thumbs up bro
@DIYwithMichaelBorders3 жыл бұрын
@@kelinjohnson7421 😎👍🔧🔩
@usiviopugh45664 жыл бұрын
My hands are not big enough for such a tool
@DIYwithMichaelBorders4 жыл бұрын
Usivio pugh Bummer...🤔 Thanks for watching. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@hcashmore117 жыл бұрын
Would this work on stainless steel 3"? how long would you think it takes to make a cut?
@DIYwithMichaelBorders7 жыл бұрын
Haydn Cashmore It will take longer...timeframe will depend on the position/ leverage you have during the rotation process. I have had great luck with this tool 😀. Keep me posted. Please Subscribe to the channel that would be awesome thanks again 😎👍
@myneckjusbroke33012 жыл бұрын
@@DIYwithMichaelBorders tool
@LCKxReCKLeSS2 жыл бұрын
Cat thief
@djohnnineonesix8205 жыл бұрын
I was gonna cut the exhaust pipe of my civic because I was pulling out the engine and someone Weld the exhaust manifold to the cathalitic converter flange. I tried that tool and after 2 hours I decided to leave the exhaust manifold attached to the car. Cut the rubber hangers and threw the manifold to the side so I can drop the engine.
@DIYwithMichaelBorders5 жыл бұрын
DJohn NineOneSix Thanks for watching & sharing your experience. Sorry to hear the tool didn’t work out for your project. That’s a bummer. Hopefully all went well with the remaining steps of your project. Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@jeffleblanc88504 жыл бұрын
The easy way is a sawzall
@DIYwithMichaelBorders4 жыл бұрын
Jeff Leblanc Thanks for watching & we hope you enjoyed the video. We haven’t tried that option. Many more helpful videos to come! 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😀👍🔧🔩
@davescraperanddiy25354 жыл бұрын
except sawzall wont be as clean of a cut and you will burn through blades that get bent when they smash the underside of the vehicle,
@forgottenknowledge89172 жыл бұрын
2:07 for the cut yo.
@DIYwithMichaelBorders2 жыл бұрын
Thanks for watching, hope all is well. 😎👍
@sandrolavo57553 жыл бұрын
Great tool
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & sharing this. Hope all is well. 😎👍🔧🔩
@johncuervo30193 жыл бұрын
Would be a lot easier with the pipe mounted so you can hold the tool with both hands
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & we agree. 😎👍
@AzNightmare8 жыл бұрын
Estimate, how long would it take to cut an exhaust pipe using this tool?
@DIYwithMichaelBorders8 жыл бұрын
Takes about 3-5 minutes....that's if you have a lift and your working while standing....I used same tool and cut pipe in 5-7 minutes while laying on the ground😀👍
@AzNightmare8 жыл бұрын
Thanks. I will be working from the ground on jack stands. I just wanted to make sure this wasn't going to be a tedious 15-20 min task. lol
@BosnianBaller218 жыл бұрын
+Michael Borders I tried it on my stainless steel exhaust tip, 10 minutes in and hardly made any progress
@DIYwithMichaelBorders8 жыл бұрын
+BosnianBaller21 Are you using a used tool or brand new tool?
@BosnianBaller218 жыл бұрын
+Michael Borders I rented the exact same tail pipe cutter you have from Advanced Auto Parts. I'm sure it will cut through the copper part of my exhaust but it won't work on stainless steal.
@markfloors69883 жыл бұрын
Dude, you didn't show the break thru, you just basically talked
@ifGarage Жыл бұрын
Not convenient nor efficient 😂 just get a $60 sawzall at harbor freight you’ll save yourself time and anger because these cutters take forever to cut through the thinnest exhaust pipe
@MrDon9672 жыл бұрын
Will this cut catalytic converters?
@DIYwithMichaelBorders2 жыл бұрын
Thanks for watching & it may not be that strong...🤔
@MrDon9672 жыл бұрын
@@DIYwithMichaelBorders ufff
@DIYwithMichaelBorders2 жыл бұрын
@@MrDon967 Check out the video link below, we use a Sawzall to cut through our pipe. kzbin.info/www/bejne/iafIoJ2NaddmpJo Keep us posted on your project.
@MirroCosmoKenisis3 жыл бұрын
U need new gloves, u struggling with the one's that you have. I love to send you a pair
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & we appreciate you reaching out to us. Those gloves have been mia for years...🤣
@MirroCosmoKenisis3 жыл бұрын
@@DIYwithMichaelBorders On to better and more fitted ... thanks for your response.. Happy Thanksgiving
@DIYwithMichaelBorders3 жыл бұрын
@@MirroCosmoKenisis So true 😁 Happy thanksgiving, enjoy your night. 😎👍🔧🔩
@solidstreetrunz39563 жыл бұрын
Where did you get this tool?
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & welcome to the DIY Raptor Club. We rented this for 100% free from our local AutoZone. Let us know if you have any questions. Enjoy your night. 😎👍🔧🔩
@1998gst46112 жыл бұрын
Dude he just said where you can rent it at Auto Zone. You weren't listening.
@solidstreetrunz39562 жыл бұрын
1998gst4611 why are you wearing shades indoors ?
@karimsadouni17055 жыл бұрын
Good video
@DIYwithMichaelBorders5 жыл бұрын
Karim Sadouni Thanks for watching & we appreciate you taking the time to reach out to us! This is an awesome little tool to have in your tool box! Let us know if you have any questions, we are here to help! Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@shanitrapotier5834 жыл бұрын
Can i use it to cut pvc pipe
@DIYwithMichaelBorders4 жыл бұрын
Shanitra Potier Thanks for watching. Possibly...🤔 Below is a link to our video showing the awesome tool for cutting PEX pipe. They also make an awesome tool for PVC which can be found at Lowe’s. Hope this helps. kzbin.info/www/bejne/hJnFln-Lm9iJe5o 😎👍🔧🔩
@jimmywells335 жыл бұрын
WHAT?! I can't hear shit but that dumb intro music was blaring though! Downvote!
@Jdmlsturbo5 жыл бұрын
Can you cut degrees and angles? Pie cuts or lobster cuts?
@DIYwithMichaelBorders5 жыл бұрын
YoungTimmy Thanks for watching & sharing your comment. Great question. This cool little tool is definitely a good tool to have handy when working on exhaust pipes. This tool is more designed for straight & clean cuts rather than angles however it may be possible...depending on your project. Keep us posted on your project & any questions you may have along the way. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@alxb24743 жыл бұрын
These ads are ridiculous!
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching. 😎👍🔧🔩
@JoseCubanitofm3 жыл бұрын
3 hours later…..
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & let us know if you have any questions. Us fellow DIY’ers need to stick together! Hope all is well. 😎👍🔧🔩
@LoneRonin773 жыл бұрын
Im dumb so i used a hack saw to cut mine while it was still on the car 😂 i shoulda just got a saw or somethin
@DIYwithMichaelBorders3 жыл бұрын
Thanks for watching & we appreciate you reaching out to us. Let us know if you have any questions, hope all is well. 😎👍🔧🔩
@testtesting2868 Жыл бұрын
hahaha so easy he never completed the cut!
@DIYwithMichaelBorders Жыл бұрын
Thanks for watching. Let us know if you need anything questions answered.
@moto6ixmoto834 жыл бұрын
Seriously just Buy a reciprocating saw.
@DIYwithMichaelBorders4 жыл бұрын
Daniel Fischer Thanks for watching. That is definitely a step up in action. 😀👍 We appreciate you sharing.
@es2w5346 жыл бұрын
grinder takes 2 sec XD
@DIYwithMichaelBorders6 жыл бұрын
Es So true 😆...Thanks for checking out the video Es! We hope the video helped! Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! 😎👍🔧🔩
@MaxiiBoii236 жыл бұрын
Es True, but you can rent these auto part stores for free. In my area, maybe not all...
@hillbobaggins6 жыл бұрын
Yeah, grinders work way quicker with cut off blades but I gotta remark that cutting straight all the way thru with them is difficult.
@rickyr77905 жыл бұрын
Grinder for cutting tube? Way to make a shitty cut..
@Don03G2 жыл бұрын
Depends on if you want to salvage something for a cleaner cut/ cheaper tool, and no power etc , free, options baby
@seanunderwood47634 жыл бұрын
Angle grinders look easier tbh
@davescraperanddiy25354 жыл бұрын
on a workbench yeah, under the car no, 4 or 5 inch cutoff wheel wont make it through 3 inch pipe and bigger wheels will cut a lot more than just the pipe
@tiffanygarrettgarrett53148 жыл бұрын
this tool is Actually great ( If you are strong) I can cut the pipe in 1 minute
@DIYwithMichaelBorders8 жыл бұрын
Hey thanks for checking out the video and sharing a comment. 😀👍
@sidvicious35044 жыл бұрын
Those suck ass look up rigid soil cutter
@GerardoZuniga3 жыл бұрын
Nice shop 😂😂😂😂😂😂😂😂😂😂😂
@DIYwithMichaelBorders3 жыл бұрын
What’s up Gerardo, we appreciate you watching. Us fellow DIY’ers need to stick together! Hope all is well with you and your family. Enjoy your day. 😎👍🔧🔩
@DallasTechie6 жыл бұрын
Didn't see you cut anything
@DIYwithMichaelBorders6 жыл бұрын
DallasTechie Thanks for checking out the video Dallas! We hope the video helped. Unfortunately at the time this was the only pipe we had for demonstration. Please subscribe to the channel and turn on your KZbin notification Bell that would be awesome thanks again! 😎👍🔧🔩
@josheichholz16664 жыл бұрын
Hey just so everybody knows you should use a zip-tie around the handles you'll thank me later
@DIYwithMichaelBorders4 жыл бұрын
Josh Eichholz What’s up Josh, thanks for sharing. We hope the video helped. Please subscribe to the channel and Ring your KZbin Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@josheichholz16664 жыл бұрын
@@DIYwithMichaelBorders okay so actually the zip tie worked for a little bit but what I ended up doing was using a hose clamp after that that worked quite a bit longer but that still wasn't good enough I'm cutting 3-inch pipe and it's pretty thick so what I did of course I already had some heavy duty exhaust clamps because we're working on exhaust right take that clamp and put it around the handle nothing will make that slip loose.
@DIYwithMichaelBorders4 жыл бұрын
Josh Eichholz Thanks for the update Josh, we appreciate you sharing this info. Us fellow DIY’ers need to stick together! This may be helpful to future viewers. You Rock! 😀👍
@josheichholz16664 жыл бұрын
@@DIYwithMichaelBorders okay last update I promise I also recently found out the hard way it is not designed to cut through stainless steel exhaust pipe. 4 hoursof cussing and and using all my strength and all my and all my brain just to find out the people should have told me that that work behind the counter at O'Reilly. and not only am I a do-it-yourselfer I'm also a graduate of UTI with a 4.0 GPA alpha beta cappa 7 student of the class awards with an associate's degree in automotive technology.
@DIYwithMichaelBorders4 жыл бұрын
Josh Eichholz That’s awesome. 😎👍🔧🔩
@ethancarriere23584 жыл бұрын
What about a grinder
@DIYwithMichaelBorders4 жыл бұрын
Ethan Carriere Thanks for watching & we hope the video helped. We haven’t used a grinder before...🤔 We really enjoy making these helpful videos for our fellow DIY’ers. Many more helpful videos to come. 😀 Let us know if you have any questions. Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@officerwoods56883 жыл бұрын
Sorry but this guy seemed like he’s a little it of a nut.
@isaucy43943 жыл бұрын
cap
@Jordan-fg7ek4 жыл бұрын
Sawzall
@DIYwithMichaelBorders4 жыл бұрын
Jordan Thomas Thanks for watching & we hope you enjoyed the video. Let us know if you have any questions. Many more helpful videos to come. 😀 Please subscribe to the channel and turn on your KZbin notification Bell 🛎 that would be awesome thanks again! 😎👍🔧🔩
@balsara6757 жыл бұрын
hi
@JimingC8 жыл бұрын
I sub u but u didn't
@DIYwithMichaelBorders8 жыл бұрын
Thanks for viewing and leaving a comment....I Subbed to your channel...pretty cool channel