Рет қаралды 691,792
Did you know how to cut a glass bottle?
Today we have a cool homemade product - we will make a glass cutter for bottles. This is a very useful homemade product for creativity.
A lot of interesting and useful things can be made from glass bottles.
Simple and rigid design. A bottle cutter with flexible tinctures allows you to make even, almost perfect cuts. We will test the homemade products on different bottles and see what homemade products can be done with the help of this cool homemade products at home.
Who does not like tinkering ... can buy a finished glass cutter for bottles ... - all links can be found below.
💡 Useful links recommended in the video;
✂︎- - - - - - - ✂︎ - - - - - - -✂︎
☑ GLASSES FOR ALIEXPRESS BOTTLES - ali.pub/3auge5
☑ SIMPLE GLASSES - ali.pub/3augkr
📤 DOWNLOAD SQUARE - drive.google.c...
💡 Educational videos:
✅ How to make a stencil layout - • Как сделать трафареты ...
✅ How to make a DIMMER - • Регулятор оборотов 220...
************** 🔊 🔊 🔊 **************
For homemade will need:
Frame - can be made from a piece of 10-millimeter plexiglass ... or plywood
Threaded Stud M10
Glass cutter such as I bought on Aliexpress
Wing nuts - m10 6 pieces + 6 ordinary nuts, washers 20 pieces,
M6 bolts 4 pcs + 4 nuts.
DIY stencils. You can print them on plain paper and glue with paper glue to the Plexiglas. You can cut the frame with an electric jigsaw or grinder. Cut the bottle better in gloves.
The trail of the glass cutter must be tapped from the inside or heated.
Warm up better with the help of a nichrome spiral, which I fixed on a piece of foam-gas-silicate block. To adjust the temperature of the spiral, you will need a dimmer. A useful thing, very simple, costs a penny ... If you collect such a dimmer yourself, you will not regret. The link to the dimmer video will be higher under this video and at the end of the video. Warm up to evenly. The spiral should be slightly red. If the current is increased stronger, then the spiral will be glued into the glass or rather melted. We will prepare a dozen bottles for street lamps. Before publishing this video, I studied this topic thoroughly. Bottles cut in different ways. Even nichrome thread - but, without a cut with a glass cutter, the cut is not even. Many, after heating ... bottles dip it in cold water. I tried it too. But he refused. Because 10 percent of the bottles burst not along the notch but above or below. And uneven edges and cuts are polished sooo long. Having cut the bottles in this way, it takes 5 to 10 minutes to process the edges. By the way, before flowed how to cut, it is better to dry the bottles inside and out. So you will not spoil a single bottle.
Edge Sanding can be emery on wet. The method is tested, good, sandpaper is almost not clogged and long enough, but polished a little longer than with a polishing or orbital machine.
If you like my glass bottle cutter and this video in general, put your finger on the milestones. If you have experience on this topic, share in the comments. The most frequently asked questions, I will duplicate in the attached comments under the video. There they will duplicate and collect useful tips and video additions.
That's all dear friends. For you, the author of the channel 1000 DIY's and Advice tried - 1000 GAME AND TIPS
I hope you enjoyed this cool homemade idea.
Thanks for watching ... Don't forget to leave a like or dizlike and subscribe to my channel.
✂︎- - - - - - - ✂︎ - - - - - - -✂︎
💰 How to make money on Aliexpress - EPN Partner Program EARNINGS on Aliexpress - ePN Affiliate - ali.pub/2ubyb4
💗 Likecoin - cryptocurrency for likes: likecoin.pro/@...