How To Cut A Glass Bottle With A Simple Tool!

In this video, I’ll show you a very simple technique that allows you to cut this kind of spiral shape out of a glass bottle. You will be surprised by how simple it is! And what is most important - you could do it by yourself with a few basic tools.
DIY Fractal Vise Jaws From A Gear Teeth - • Bench Vise Improvement...
Main used tools:
- Diamond Glass cutter: shorturl.at/bJQY9
- Rotary Tool Cutting Discs: shorturl.at/CLTV8
- Electric tape: shorturl.at/diF06
Recommended:
- Spiral router bits - shorturl.at/cjnAP
- Carving spiral router bit: shorturl.at/yOPRV
- Machinist squares: shorturl.at/amRU4
- ToolkitRC M7AC - A better smart charger: rb.gy/7i2eww
Music by Epidemic Sound (www.epidemicsound.com)

[@chickenzz2612]

How to cut a glass bottle with a simple tool. Continues to name tools ive never even heard of. Perfect

[@magicalpencil]

He uses a glass cutter and a soldering iron. What tools did you expect? A hammer and screwdriver?

[@xpndblhero5170]

Watching the glass crack really slowly was very satisfying.... Now I want to try.

[@vex9596]

I'd recommend using a nichrome wire instead of the soldering iron. It's pretty cheap and comes in various gauges, so you could use a relatively thin gauge if you wanted a high precision. For people not familiar with nichrome, it's basically a metal wire commonly used as a heating element. When electric current flows through it, it will quickly heat up. It can be used with both AC and DC, but please don't hook it to your outlet unless you know what you're doing. Using a low voltage power supply (5-24V) with high current rating is probably the safest approach. If you don't have such a power supply and don't want to spend a lot of money, you can modify an old computer power supply (ATX PSU) quite easily and it'll do the trick. Also, you should probably wear gloves when cutting the glass, and use sand paper to smooth it out after cutting so it can be safely handled.

[@timb.timberly3335]

What about a wood burning tool?

[@vex9596]

@@timb.timberly3335 That's essentially just a soldering iron with various tip shapes. Many of those tips are not very well suited for this due to low thermal mass or poor surface contact, but it's not impossible to use it for the task

[@peetsnort]

And Khantal wire is fantastic. Melting point is 1500 °celcius

[@curiosidadesdelbuho8514]

Sigue artes del buho

[@tihzho]

Use the nichrome wire with a 0-130VAC variac - with attention to the current.

[@MarinusMakesStuff]

Nice video, I like the narration as well! It really makes the video more complete and it shows you are involved with really wanting to explain it.

[@justglenc]

This is really pro. Thanks for the soldering iron tip. 👏🏻👏🏻

[@Baldavier]

Great!!! Would love to see what more you could do after these are made!

[@viorsa8200]

Magnífico tutorial maestro, una buena técnica, aunque no garantiza un resultado satisfactorio, algunas veces, gracias por compartir sus conocimientos y experiencias, un saludo cordial y por supuesto un gran like desde Narón (Galicia) 🤓🌞

[@footgod420]

Of all the ways I've learned to cut bottles this way is definitely the coolest, and I love the fact that you could just cut any shape you want out of the glass all I knew how to do before was how to cut the tops off of bottles, and make them into cups which I learned on a different KZbin video, and of course I used to drill holes bottles with a diamond drill to make water bongs, and I used to melt bottles in a crucible to make molds of figurines but this is definitely new to me awesome idea

[@korysmith6513]

That's AWESOME!!!!! You did that SOOO much easier & simpler than any other wine bottle cutting vid I've seen. & I've watched a lot;!!!! THANK YOU!!!!!!♥️♥️♥️♥️

[@lulum1656]

Awesome, just what I need for my upcycling assignment!

[@friedrichmarkus3574]

You could also smoothen the edges with a propane torch. The problem with your instruction is, that you still have thermic tension in the glas, after operating with the soldier iron. You need a kiln and heat it slowly up to about 500 to 550 degree Celsius, and let it cool down slowly over the night. This way the glas is much more endurable, and will not split so easy.

[@frantisekvihara2641]

>

[@keithrobertson5110]

Well said, your better than him. What is thermic tension?

[@rebelrat3594]

Well the way he does this the bottle would explode he's a lucky bastard

[@taylordavis1543]

You can't just torch the edges without first preheating the glass. Thermic tension isn't the technical term. This is thermal shocking due to the expansion of the glass near the heated zone. While there are tensile stresses present in the glass when heated with the soldering iron those stresses are not permanent stresses and annealing is not required.

[@Mr-D143]

@@taylordavis1543 thank you. You saved me from having to explain how it works, ha

[@WiKiTWoNKa]

well I'm not very sure of what practical purpose this would be but I do think this is very interesting and perhaps it can be used for an art project or maybe some kind of planting pot or something this is definitely a conversation piece and I love it

[@laurin4405]

Indeed... I dunno what it would be used for either; but it looks cool as hell 😉

[@polka23dot70]

Wikipedia article about 'wafer dicing' describes similar technologies.

[@albingrahn5576]

@@laurin4405 it's a decoration, it's use IS that it looks cool

[@AlwaysBolttheBird]

I figured vase for fake flowers

[@nikoravnikar]

And than u have videeos abaut how to drink water so this is not so usless

[@llpz8107]

Es maravilloso el resultado, felicidades.

[@ambergris9359]

Can't wait to display this into my living room and wait till my family get cut ❤️

[@ashleylordess5621]

🤣

[@commandoconstruction2720]

Very cool technique. Nicely filmed. Thanks for vid.

[@brendagould13]

Amazing work! Thank you for posting!

[@bestillpatience6380]

I'm still waiting on the "SIMPLE TOOL" part ...😜🤪🤷🏿‍♂️

[@mukeshsharma4433]

You are a great artist. It's a unique idea. Weldon.

[@jaabnegat]

Jestem zdumiony, że takie ciecie jest w ogóle możliwe! Dziękuję za film Pozdrawiam

[@MrReasonabubble]

Great work, great presentation, great filming, great narration. Thank you.

[@curiosidadesdelbuho8514]

Sigue artes del búho

[@Lextrow]

​@@curiosidadesdelbuho8514 no

[@ryancrume]

nice work, I didn't know that trick with the soldering iron!

[@hassanal-mosawi4235]

Thanks for sharing that!

[@brendagould13]

I love them both!!

[@Worthi_Creations]

Awesome idea! Beautiful art!!

[@albamartinez6613]

INCREIBLE...ENCANTADOR TRABAJO...MUCHA DEDICACION..👍👍👍👍👍😍😍

[@yourfactstory]

Really cool ! Thanks!!

[@orly2663]

Thats really really cool, thanks for the video!!

[@efremsa]

Simple and Amazing!

[@psylegio]

Brilliant! I would really like to give this a try! How did you cut the label of the Jack Daniels bottle without burning it? Did you remove it first, cut it and then put it back? ETA: maybe you did burn it but then sanded the edges off.

[@tony359]

very nice technique, thanks for sharing!

[@johngunning2123]

Brilliant!

[@spiritwhispers667]

brilliant

[@laurin4405]

WoW... Never knew about using Heat as an aid when cutting Glass... That Soldering Iron just makes the score follow/chase the heat... Neat! Thanks

[@jamesstephens1539]

I like the bottles the best awesome work Thank You

[@salahh89]

Great and original idea 👏👏

[@BreezeLive98]

You Genius! When I tried to make a homemade bong from a bottle for wine, I suffered with a bunch of attempts with a wire, combustible substance and a temperature difference in ice water!

[@mark-nightingale]

Great informative video. Well done.

[@mhughes1160]

Great video Thanks for sharing 👍

[@BigDoughieG780]

Genius!

[@WGRa]

YOU"RE AWESOME! Thank You so much :D

[@miklblitz]

great job, thank you

[@michaelsangma4569]

Very good idea ❤️👏Love to watch ❤️

[@koko.art74]

beautiful art. greetings from Indonesia 😊😊

[@austinbrockner6405]

Wet your score line before heating. I don’t know if it’s the water evaporating causing irregular temperature but it’s worked better than dry heating the score line in my experience

[@miguelaustralia3473]

Great job mate

[@GoblinKing13]

i ended up making a successful online business selling these after watching this video shipping globally so thanks for that :D

[@savorymaghrebfoodalgeriamo997]

Thank you

[@vthayaparan6176]

Thank you so much

[@NickC_222]

This is so cool.

[@sierraecho884]

Pretty cool, nice tutorial.

[@vogtland_holz]

Great Idea 👍

[@washingtonbrasilino8063]

Very good !!!

[@sunshineravens]

The finished bottle looks amazing. 👌 I was actually looking for how to make circular holes in glass, but got sucked into this which is much cooler. 😀

[@lewdards1127]

very creative thanks for sharing

[@Patbonsaiandmosstv]

very good idea

[@wasanaboxing]

Good job Thanks for sharing my friend

[@DeadlyVenomKing]

Whole new Art

[@MCsCreations]

Brilliant, dude! Really fantastic work! 😃 Stay safe there with your family! 🖖😊

[@akhoosain1412]

Crazy idea boss

[@mildredcordero4949]

That's nice, I have a few bottles to try...

[@jessicagalyon5840]

Very cool! Will hot & cold water work to crack the glass this way? I don’t have that tool

[@RealtalkYo]

this is art

[@jrpcoins]

I haven't finished watching I'm 30 seconds in but I'm guessing your going to use yarn soaked in lantern oil and light it and dunk it in cold water? Idk I'll keep watching

[@superbob1548]

very impresive 👍😇

[@SaniyaSachinm]

Thanks I got New KZbin Channel from this Video to Learn More Knowledge.

[@voodetraike1172]

Show de bola parabéns 👏🏻👏🏻👏🏻👏🏻👏🏻

[@vdsmade]

Great job 👽👍

[@CalvinHikes]

I think you meant to say with several specific tools.

[@hullinstruments]

I would definitely try annealing it to the best of my ability. You can build a DIY polariscope for basically free. Which would help a ton. And show you the inter stress. I would be afraid that without annealing, Would very likely lead to more fragility and possible cracking Also, you could use that aluminum tape (found very commonly and cheap at any hardware store) on the areas which you are keeping... Or at least along the cut lines. That will keep the soldiering iron from propagating the heat into the sections planned to keep. And we'll stop them in their tracks before they could cross that line. Or you could even purchase copper tape to sync and guide the heat better. As it will transfer he even better than aluminum

[@libtrs838]

It is just a decoration. You would re-heat the whole decoration to 900f and then slowly cool it over hours? Then build a polariscope to inspect? All for an arts and crafts tchotchke made out of garbage? Briefly touching a probably 600f tip, to a pre cracked spot on the glass didn't drastically change the structure of the glass.

[@pedroalvarez7882]

nice simple tool

[@ryananggoro493]

Do you have to hammer the glass from inside or you can do it too from outside !?

[@mamaj6028]

Awesome !! 💖💖 Thanks

[@garyrendano4717]

pretty cool.

[@wallamkupardonmon513]

Excellent

[@Sheryv]

Great.. will try ..

[@xxxjamxxx638]

Cool

[@orphanmeat4sale24]

Ima try this.

[@rofhiwamulaudzi2335]

Love it

[@trxntroll843]

How to build yourself a future broken decoration.

[@minoodew195]

Awesome ❤️🙏

[@PriyankaPradhan-vs9xn]

Nice

[@Foodiemjv]

Thankx dear

[@dharmilshah1647]

Would cut off round base, and you'll get brilliant looking lamps shade

[@eyesofthecervino3366]

I like your thinking. The bottom bit could make a nice soap dish. And if you do the same thing, but higher up, you get drinking glasses and glass funnels for watering houseplants.

[@makantahi3731]

very well

[@mbuguapetrov1280]

Nice idea

[@oysterjamivxx]

title should be 'how do make hazardous decorations'

[@menenowtv2348]

Thats really true

[@menenowtv2348]

Its really hazardous

[@asaljdsimplecraft2917]

Nice video

[@marieline23]

Wow amazing

[@danielg2946]

very cool

[@paulkorakas8778]

GENIUS. YOU MAST HAVE SPENT SOME DAYS EXPERIMENTING, OR WEEKS NO MATER BUG BIG BRAVISIMO FROM ATHENS GREECE

[@godessofyouguess]

The soldering iron should be hot or no?

[@davidbolha]

Obviously hot.

[@markszizars4682]

I have a question, how did you do the jack daniels bottle, it had a label on it.

[@bonaventuramatulile1345]

Awesome..👍💯

[@AhmedBiomy]

wow awesome

[@nevera2minman]

The access could be used as a wind chime if u put a hole & some string threw it... Just an idea of what to do with all your cut bottle excess

[@bigglynals]

What soldering iron did you use? I purchased one but it didn’t work. What wattage?

[@curiosidadesdelbuho8514]

En artes del búho vi cosas muy interesantes para quienes gustan de manualidades.

[@Mr2at]

Clever

[@aphrodite3005]

WoW!

[@atfyoutubechannel6852]

Where to buy that diamind glass cutter?