How to Cut Your Hair System Base to the Right Size | LaVivid Hair

Check this video out to see how to cut your hair system base to match your template.
Check out the LaVivid Hair System Collection: bit.ly/LaVivid...
===
🛑For more inspiration, please go to:
📖FACEBOOK / lvtoupee
📷INSTAGRAM / lavivid_hairreplacemen...
⏲TIKTOK / lavivid_hairsystem
🛑LaVivid Online Boutique:
💻 www.lavividhai...
📧Email: [e-mail]
☎Tel: [phone]
( Mon-Fri 9:00am - 5:30pm PST )

[@markie74656]

Hey Jake, interesting way to use the stock form. One thing you forgot to mention for people who are still learning about this stuff is that, unless their template/head shape is completely symmetrical, they'll need to turn the template inside out before placing it on the system or else they'll be cutting the system in a mirror image to what their head shape actually is, making the system not fit properly.

[@LaVividHairSystem]

Good point. We will let Jake know about this. :) Thank you.

[@arisvalenzuela6194]

@@LaVividHairSystem which type of system shows in the video?

[@LaVividHairSystem]

@@arisvalenzuela6194 Hi, this is our Crius model. :)

[@LaVividHairSystem]

Hi Mark, thank you for pointing this out. This is very important to get the base cut correctly. So when we use this hard plastic shell to make a template and then cut the base, if we make sure that when we copy from the old hair system and when we cut the base for the new hair system, we place the hair system base up on a mannequin head for BOTH hair units, we will get the base-cut correctly, right? Instead of cutting it in a mirror image. Am I correct? :)

[@markie74656]

@@LaVividHairSystem I think I understand what you're saying.. but please confirm if I'm right or not. Are you saying that to copy a current hair system's shape, if you turn that system upside down (lace facing up) on a mannequin head then put the plastic on top of that system and trace out the shape, then the plastic won't have to be turned inside out when using it to trace out the shape on a new system, then you're correct. You won't get a mirror image from that. However, if someone was using the hard plastic to trace the shape directly from their scalp, then they would have to turn the cut plastic inside out in order to avoid a mirror image cut on a new system.

[@TheGuyclark1958]

It looks like you have a racoon on you're head bro.

[@zakiuddin5234]

Thank you for actually showing how to cut base

[@darwinhardin1878]

That's all wrong sorry 😞

[@Fd20y]

I agree. Why not use a white pencil and go round the plastic template with it then cut it with the blade. No need for the drawing pins and the system needs to stretched slightly when you run the blade along to cut it easier. He’s over complicating throngs here

[@BluePineTree-01]

Why didn't you show the process of how you use the base of your hairsystem to trace onto the plastic?

[@PassionGrows]

Just use a small eyebrow scissors. And gently cut the unit with the tip of the scissor.

[@HairSystemDIY]

Great video Jake. An essential tool in the toolkit for any stock hair system wearer 👌

[@ivanjohn9201]

What a great video demonstration about customizing the hair system to match your current system. Thank you !

[@LaVividHairSystem]

Thank you! :)

[@andreluizpostigo848]

Can’t we order it cut to size already ???

[@BluePineTree-01]

Thanks for the video. Did someone help you line mark the template before cutting?

[@LaVividHairSystem]

Yes. :)

[@alexandersam6110]

I have a question brother. After that you go to a regular hair salon and they style it for you correct? This would be much more affordable if I can do it the way you do it!!

[@alexandersam6110]

You still haven't answered this question from 3 months ago

[@TripletDadLife]

Yes if you do your own template cuts/apply it then go to salon and get a cut. it is MUCH cheaper than having them do it all. Cuts usually range from $15 and up where I am.

[@LG_425]

@Men's Hair System Lavivid If i will order that product that plastic shell also included? And what type of paste you are using and how long it takes? I'm interested in the product. From Philippines here.

[@LaVividHairSystem]

Yes, we will include the plastic shell in the package. Also, please feel free to email [e-mail]. Our hair expert will help you solve your problem!

[@leopoldparadocsical9454]

Thank you so much Jake. I was thinking of doing the same - and as if by magic, and great minds thinking alike, you did it. I got myself a surgical/dissection kit with surgical scalpel blades (not easy to assemble, must check a video for that) I'm just about to cut mine - this way

[@LaVividHairSystem]

❤️🧡💛

[@browningslifeinthephilippi7791]

I just got a new lordhair system today and I was looking for a you tube video to cut it down, this will be my first system so I am a little nervous, I will take my time and hope for the best.

[@LaVividHairSystem]

Thank you so much for letting us know!

[@alexandersam6110]

How did it go? any tips brother?

[@blahmehpfft]

That plastic thing is a little to small for my head so I’m freaking out about marking it and cutting it out.

[@LaVividHairSystem]

If so, please bring your hair system to the hair salon and ask for help. Thank you!

[@blahmehpfft]

There isn't any hair salons near me that work with hair units so I ended up cutting the sides down a bit until I could get a better fit.

[@LaVividHairSystem]

@@blahmehpfft Thank you so mcuh for letting us know. Please keep watching more instruction videos and you may learn how to cut it well. Thank you!

[@waynedavid259]

You actually didn’t show us how to make the template you just showed us what to use as a template😮

[@rameshraddhak3428]

Can i cut mono base hair line according to my size?????

[@LaVividHairSystem]

Yes, you can cut it by yourself. Also, we do offer pre-cut service for our customers.

[@robbendicott-powers1494]

I would love to help.

[@pgsboy]

I would not recommend someone who doesn’t usually do this to do it . They are taking a big risk in cutting too much hair with razor etc

[@jydvc]

Thanks for this video!

[@LaVividHairSystem]

You are very welcome! Thank you!

[@Fd20y]

Simple Cling film Celotape Marker pen Template made

[@TheFuzzle1]

Is ist smart to use this template for orientation until which point the own hair has to be shaved? Of course less than millimeter inside of it should be better so there's no gap between own hair and the unit.

[@williamcharles8628]

What type of base is that unit, and what's the density?

[@WalletInvestUSA]

Awesome! How do you get a haircut after installing it? Go to a salon or do it yourself?

[@LaVividHairSystem]

You can go to a salon and let someone professional helps you. We also offer pre-style service which makes it ready to wear.

[@Sam-t7b4w]

Hi Lavivid, I think this video has the potential to ruin people's hair systems when cutting at home. Most people don't have a symmetrical hair loss pattern and the way Jake is cutting the system will cause it to be a mirror image rather than fitting the head. The best way to cut a new system to size is to fit it onto the head and then cut off the excess. A 360 mirror can help someone doing this alone. Perhaps you should remove this video to avoid causing anybody to make this mistake at home?

[@LaVividHairSystem]

Hi, thank you so much for your message. This is a very good point. Actually Jake didn't show in the video how he copied his template from his old hair system. However, if you make sure that when you copy the template and when you cut the new hair system, you turn the hair system base up and put it on a mannequin head for BOTH systems (the old one and the new one), you will get the base cut correctly, am I right?

[@SoCal9705]

Thanks for this video. This has been a game changer for me. I had no idea you could cut polyurethane this way.

[@LaVividHairSystem]

❤❤❤

[@andreslo5282]

Great tutorial! Where did you get the template dome that you traced and cut out?

[@LaVividHairSystem]

Thank you so much! We do offer the pre-cut service for our customers. So you can just apply the hair system once you receive it!

[@andreslo5282]

@@LaVividHairSystem Thanks, however I want to know where Jake got that plastic template. I want to do it myself.

[@LaVividHairSystem]

Thank you so much for the reply! You can go to Jake's channel and ask him: kzbin.info/door/wwi1KV00ZDAwxGGuy7HPgg Thank you so much!

[@Fd20y]

@@andreslo5282 celotape and cling film mate I cut & fit and offer a home service bro. Get in touch

[@ronaldcarnevale3424]

Jake....those aren't Bobby pins. Lol. They are pushing pins. Bobby pins are those 3 inch metal things that women use. Lol

[@suraj7701]

Hey Jake, you video is on a different channel. Is this part of a sponsorship?

[@LaVividHairSystem]

yes, it is. We have Jake's permission posting his video on our channel. This is also a promotion for Jake's channel too.

[@seand5517]

Are you sure its ok to put the pins through the base like that?

[@LaVividHairSystem]

Yes, it is fine. In order to get the base right, this is the only way to keep the unit not moving.

[@jeffr3773]

What if it's your first hair system and you don't have a previous one to stencil the template from?

[@TripletDadLife]

Several ways to make a template. You can use the hard plastic shell that it came with. Shave top of your head and get your template. Place hard shell on top. Take sharpie and draw a perimeter around your head where the skin meets the bio hair. Create your own front hairline and BOOM you're done. Another way is to use saran wrap, place on top of head, make a perimeter with sharpie, then apply several layers of heavy duty clear tape on top of saran wrap while still on your head. After that remove template and cut the path of the sharpie line.

[@jeffr3773]

@@TripletDadLife awesome thank you

[@sjc1235]

Do you get the plastic clear thing?

[@LaVividHairSystem]

Yes, this plastic clear thing comes with each order. :)

[@dsd-downshiftdave8056]

Not everyone has a mannequin

[@Poliwhirltrainer35]

Buy one. Easy fix.

[@tonypaella]

@@Poliwhirltrainer35for real. Some people...

[@lansikz2831]

Thanks!!

[@LaVividHairSystem]

😊

[@joshgates2671]

This system is what we need advancement on. It is by far the best. If we can get the poly in the front to .03 with quality poly tough material, with lifted injection or vloops in the front. And be able to pack the density on .03 to a medium or medium heavy density. I think its possible with a thin super fine Swiss middle. Both are thin enough. I want to make a custome, but it would be a hit just like .05 poly all around with french middle on your website. If not the best system hair world has ever seen.

[@LaVividHairSystem]

Thank you for the valuable advice. What you describe is an ideal system for sure. However, there is technique issues to use .03 poly in the front because the poly that connects to the lace has to be a bit thick, so the base can be strong but it is possible to use thick poly in the connection area and decrease the poly thickness gradually to 0.03 to the very front. Also injection cannot be performed on a 0.03mm poly. Vloop is the only option for a .03mm poly. :)

[@joshgates2671]

@@LaVividHairSystem ahhh gradually .03 to front brilliant! With virgin remy hair and I don't mind french middle, or if we can do silk top middle! Is the custom time still around 4 to 6 months right now?

[@LaVividHairSystem]

@@joshgates2671 Thank you for the response. Right now we are not able to make a silk top base at all. Yes, the custom time is still that long. :)

[@joshgates2671]

@@LaVividHairSystem mind blowing!! Any date on when your stock for when the thin poly all around with lace middle will come? So I can buy 2 soon as they come out. Hope we got the average 7 by 9 sizes coming this time ☺

[@LaVividHairSystem]

@@joshgates2671 It is hard to provide a date to be honest. Could be months. However, we will make a post when it is available again. :) Stay tuned.