How To Deal with Adhesives in Repair - Basic Skills

[@arnoldkokonya]

Yes. Please do more videos like these. Am glad I know what to use and what not to use and why. Thanks for the knowledge.

[@hagif.4590]

Thank you for the video. Instead of expensive heating pad you can also use 3d printer print surface in case you have such a printer. It allows you to set the perfect temperature for this.

[@shb8651]

0:33 I wish I could do that.

[@HortBlam]

One downside of the cold method is also that it can cause water to condense from the air onto internal components, which can cause ex. capacitors tho short out.

[@jasluffy]

If I'm using heat gun, what is the the ideal temperature to set?

[@mariodistefano2973]

That's the one of painstaking points. I've tried on trial & error basis. found that around 200°C will not bend phone plastics but will soften the glue. One drawback is, expecially on recent mobiles like Sam S3, S5 and so on, the LCD keep demaged at these temperatures. I personally had this disaster experience. I came to conclusion that heatgun and metal-masking the glued area should be the best solution, but I cannot imagine how to make such masks keeping them usable on multiple device brands.. so who knows....

[@xxnike0629xx]

It’d be nice if electronics used normal Phillips screws instead of adhesives.

[@Adri_BlackBeast]

Buen vídeo 👌 No sabía que se usaba el frío también para los adhesivos, siempre he usado calor en todos ellos 🤔

[@misssrubie]

How would one deal with the flakey copper films behind the Galaxy S models like the S5 or S6? It’s a real pain to clean the area.

[@shb8651]

That was a good video iFixit, I would like to see more, already Subscribed.

[@davidriley7659]

just fyi, that heating pad can be bought online for half that price.

[@shb8651]

The urge to make a good pun increases when you're early here and it really hurts when you can't think of a good one

[@anthonyjuarez8130]

I wanna how to apply adhesive back though. Is it even possible?

[@misssrubie]

Anthony Juarez most of these methods will not allow you to reapply the same adhesives. It’s best to apply a completely new set. Not only to keep it in place, but it also allows a more professional and clean look.

[@martyhastings9347]

thanks Guys for the good info. thanks for sharing.

[@VincenzoSims]

Good advice.

[@chrisxd9526]

Plz reply a cheap repair kit undet 20$ that maybe Work with every iphone or ill buy the 64 bit kit

[@nmrdkl]

I like how the iMac magically disappeard xD

[@TheSwagGuy5000]

IOpener don’t work pls help

[@ANSARI5X5]

Thanks

[@centorossi46]

searching screen heating station in the garden and outdoor department

[@eingelvf]

hair dryer!! xD

[@SebastianGarcia-go4tx]

Wrong gun buddy..... hot air stations are better and are temperature controlled. That heat gun is not meant for repairs smh

[@chrisxd9526]

I need a cheap repair kit plz reply under 20$

[@chrisxd9526]

iFixit Video thanks

[@المحتوى-ظ1ب]

hi

[@hotord205]

👍

[@mohammedsharif3662]

First