HOW TO DECANT SPRAY PAINT FAST EASY AND SAFELY!

Today I save paint from clogged spray cans and show how easy and safe you can do it.... for modelers too! using a 1/4 plumbing saddle valve and some scrap I had laying around. Thanks to half fast garage on youtube for the inspiration a link to his video and his version below. • $10 DIY Easy Spray Pai...

[@mikejungferman4744]

Thanks tough guy, i will definitely do this,

[@moparnut6286]

Cool I hope you get to save as much material as you can.

[@islandrc-duke1972]

great video and information

[@moparnut6286]

Thank you hope it helps someone out.

[@islandrc-duke1972]

@@moparnut6286 😁👍

[@Kevscancave]

Pretty cool tool you made 👍👀👍 never seen such a thing👀👍

[@moparnut6286]

Tools from other apps always cool when you can use something for other uses thanks for stopping by.

[@MyMiniGarage]

Watching first! 👍👍👍👍👍

[@moparnut6286]

Thank you!! I really appreciate you!!

[@rockerpat1085]

I Just Turn The Can Upside Down In A Mixing Cup With A Rag Around The Top To Catch The Fumes. Then Just Push Down!!! The Straw Is At The Top Now And The Paint Can't Be Pushed Out Just The Pressure!!! I Depressurize The Can Just Enough To Push The Paint Out In A Straight Stream Into My Cup Gun!!! Did 40 Cans To Paint Jackie!!!! Yep Jackie Was Painted With Rattle Can Paint!!! Keep Rocking It Out Brother!!!

[@moparnut6286]

Yep nothing wrong with that!! Rock on sir Pat! 🎸

[@tonysdiecastcustoms]

Awesome tutorial brother and enjoyed watching and have a great week 👍👊😎

[@moparnut6286]

Thank you Tony have a great week as well my friend.

[@Turningwrenches85]

A very good idea to decant spray paint

[@moparnut6286]

Thanks.. I hate wasting stuff that is still good works for all cans gets to the last drop.

[@bigcharliesmodelgarage296]

Great idea brother thanks for sharing.

[@moparnut6286]

Thanks big C!

[@higherstandardspc]

Thank you for the video, very informative and entertaining as well ; ) I will be making this device awesome idea : )

[@moparnut6286]

Glad you liked it!

[@bluegrasscrazy7307]

You can vacum seal the mason jars to make them last lomger.

[@moparnut6286]

Great idea!

[@2StallGarage]

This was a fun watch. Thanks man!

[@moparnut6286]

Cool glad you enjoyed it!

[@zeldadiecastracing]

Very cool work brother

[@moparnut6286]

Thank you Zelda be well my friend!

[@OlysGarage]

Awesome idea! Great video! One way to use those last drops!

[@moparnut6286]

Yep Oly I do not like to waste anything and this method works very well.

[@petesmodelcarcustoms584]

John👍that was great👍i love the valve system 👍and your controlled release was bloody funny🤣. Thanks for posting and best wishes from jolly old England 👍😎Pete 🤓

[@moparnut6286]

Yes Peter I'm old but still I have burst of uncontrollable power lol 😂 be well old man!

[@petesmodelcarcustoms584]

@@moparnut6286 it was brilliant 👍🤣. I think the sensible, safety bits were good too. I think it's a good video for anybody attempting this and takes away some of the fear of trying 👍👍😎

[@Mynextproject_74]

That's a great tip! Thanks for sharing!

[@moparnut6286]

It's works well...and check out half fast garages version too...thanks for watching.

[@musclecarmitch908]

Cool stuff!👍

[@moparnut6286]

Thanks Mitch!

[@oldmanintheshopbuiltnotbou8726]

great tips mopar i never thought about saving the paint

[@moparnut6286]

Yep paint is getting pricey got to save all you can! Thanks for the support old man!

[@robertmann7277]

Great tip! I don't know how many times I've had to pitch a can because of a clogged valve

[@moparnut6286]

Not no more now you can use that paint... Thanks for watching.

[@davidchin350]

Nice tutorial John, I usually spray a little I need for touch ups into a Testors glass paint bottle.

[@moparnut6286]

Yeah me too David .. I use paper cups and my airbrush for faster color changes.. But I have lots of spray cans that get to 1/4 of a can and quit working or I just want some paint ready to spray out of my spraygun the precise control of application of a spraygun/air brush just can't be beat by a spray can I've been spoiled! 😁👍

[@VinoRatRodbuilds]

Very cool 😎👍

[@moparnut6286]

Thanks Vino we car guys waste nothing!! The true envriomenists are we!

[@VinoRatRodbuilds]

@@moparnut6286 I think it's because you have an innovative brain. 🤔

[@moparnut6286]

@@VinoRatRodbuilds LOL 😂

[@TheShadeTreeFixitMan]

Good tips

[@moparnut6286]

Thanks... hope it saves you some paint in the future.

[@JohnPol]

Pretty cool

[@moparnut6286]

Must be it got you here LOL 😂

[@Bob0sModelFabWorx]

That valve thingy is an awesome idear. I use an awl the same way to decant my paint. The only thing i do different is I cover the little hole with tape and my thumb and shake the can to mix the paint before I pour it out.

[@moparnut6286]

Pretty cool I'll try the tape when I'm outside and I just want to pour it into a detail spray gun. Thanks for watching!

[@mikejungferman4744]

I just poke it with a razor knife with a new blade, let it gas off , and for 3 days I opened up the jars and bearly stirred it with a wooden spoon and the bubbles kept coming, so like 5 or 6 times of gassing off with a small wooden soup spoon and I'm still careful every time I open the jars ,

[@moparnut6286]

Yep gassing off can take a long time.. Slow top opening is best practice.

[@michaelhintzmikesminiature1812]

Great Video. Thanks for sharing

[@moparnut6286]

Thank you Mike!

[@THEMOFODRIVER.]

Pretty nifty!

[@moparnut6286]

Thanks man!.. save money save that paint!

[@dfactoryrat653]

The only thing I would add is (NO SMOKING ) If I missed that I'm sorry. Nice job 🐭👍

[@moparnut6286]

LOL I implied that's smoking is not a good idea while decanting.... But it's like those people who sued the gas can company into bankruptcy by check their gas cans with a lighter or a match there's always one!!!😁

[@THROTTLEPOWER]

👍👍👍👍🙂

[@moparnut6286]

Works like a charm 😂😎👍

[@UnfinishedProjectDartSport]

🇺🇸

[@moparnut6286]

America 🇺🇸 Freedom

[@MikesMoparShop-bm2tc]

👍👍👍

[@moparnut6286]

Thanks man.

[@jspeedrc]

👍🏽 Top

[@moparnut6286]

Thank you for the support!

[@jamiegsscalemodelgarage3823]

Great video, strong arm, old man. Where do you get the parts to make this

[@moparnut6286]

Hardware store plumbing section and a regular exhaust clamp.

[@NathansMoparGarage]

Looks like fun as long as it doesn't spray you. Do you collect all the marbles out the cans?

[@moparnut6286]

As you saw not much drama if you screw it up! And yes I save the marbles and steel balls out of the cans they work great in the bottles for mixing. Thanks for watching.

[@paulsprute329]

Are not you only getting part of pigment or whatever is settled on the bottom? If not why do you shake for a couple or two?

[@paulsprute329]

Before using

[@moparnut6286]

You can shake the can and it will all come out mixed together... The valve I use makes it a controlled release... But a setteled can easy better cause you can remove all the propellant and the get the paint and store it.. But you do have to give the paint time to gas out the left over propellant so it does not build pressure on storage.

[@paulsprute329]

Put A balloon on the top like you do cheap wine

[@2ahdcat]

Ohhh... just shoot the can with a S&W .500 magnum. I haz one. lol. 😁

[@moparnut6286]

Sure quickdraw the cat! 😆....wheres tor side kitten baba kitty! 🐱

[@2ahdcat]

@@moparnut6286 The... what? You sniffing glue AGAIN? lol.

[@2ahdcat]

@@moparnut6286 Check e-mail

[@moparnut6286]

@@2ahdcat cool 😎

[@2ahdcat]

@@moparnut6286 But yeah... check e-mail

[@brianodwyer6288]

too much background noise

[@moparnut6286]

Yeah spray booth is loud.