How to design a Knurled Bolt in Autodesk Fusion 360 | Fusion 360 Knurling Tutorial

[@VivianVarghese]

Perfect tutorial. Not wasting time by talking over it and digressing. Straight to the point. If the video is too fast for someone they can just slow it down in the settings. Great job!Please put more.

[@MADAboutDesigns]

Thank you keep supporting ❤️

[@drakenwatches7279]

This is great! Much more realistic knurl than many of the other tutorials out there. Good one!

[@bennylloyd-willner9667]

Good video, as in so many videos, I think the music is a bit intrusive (I just want to learn Fusion, so I want softer music with lower volume and some explaining speech - but I'm an old grumpy guy, so what do I know about how things are supposed to be 😂) A tip I saw in another video and used successfully is to just use [Triangular Internal] in the Coil feature and let the coil itself (no Profile selected, instead [Select Position: On Center]) carve the groove. That way you can skip the face creation and sweep @1:35 to about @3:35. I don't know if there is some difference in the end result, but for me, it worked out perfectly.

[@stavart13]

Thank You! Your tutorial worked perfectly! and straight to the point without exhausting explanations. Much appreciated.

[@notprochris]

Thank you! Learned a new skill and put it to use!

[@versus023]

great tutorial! thank you!

[@fortifor5410]

Great! Just tested and I need to add that we would need to remember that amount of pattern should be a multiply of coil revolution which you did right. Otherwise it will not be symmetrical. Just noticed that playing with it.

[@stereofreq7112]

Great tutorial. There was only one confusing part, which was orienting the initial coil. Since the piece I was working on wasn't centered on the workspace, I had to create a tangent plane, then an offset plane that sat at the center of the cylinder.

[@NoTimeForThatNow]

Thanks for the video, that helped me a lot!

[@Nikotinbetyar]

You sir are a lifesaver

[@markhannibal5434]

Nicely done video. I slowed it down a bit and yeah I agree with Darlo about the music. Keep them coming - Subscribed.

[@torquebiker9959]

Thx. Explaining your steps would be better then some random music.

[@buildmotion1426]

Very helpful, subscribed!

[@_alfredjerry]

Thanks a lot for this perfect tutorial!

[@sideburn]

If you slow it down to .25 , the music is actually good 😂 ambient chill and you can follow the steps. Perfecto!

[@_ondaak_4787]

Hi can I have a question? What Graphic you have? And how it manages it?

[@MADAboutDesigns]

Normal graphics Nvidia 660 I guess.. cad design depends mainly on your processor

[@euro2984]

Unfortunately, the options shown in your tutorial are not available in my sketch menu.

[@stoichkovivan]

Excelente, gracias por tu tiempo y enseñanza, bendiciones para ti

[@m8knitcount]

Hi, if you have time, would you do a tutorial in Fusion 360 on creating complex patterns such as shoe sole treads? Thank you.

[@MADAboutDesigns]

Next video will be on a complex pattern design

[@MADAboutDesigns]

Or maybe next to next 😅

[@akaZarj]

u best! thnx!!!!!!!!

[@francescodigiovanni4632]

Se non fosse così veloce, il video sarebbe perfetto.

[@rocketsurgeon1746]

Great job. Too fast for my beginner brain :)

[@ryandeweese363]

I'm in the same boat lol!! I was thinking I could go to a texture folder and click knurl this face lol

[@ryandeweese363]

Guy knows his craft though

[@rocketsurgeon1746]

@@ryandeweese363 love and hate fusion360 :)

[@Headrom789]

im getting a compute error?? any reasons why??

[@bennylloyd-willner9667]

@4:29 there is an error message, the calculation for the Quantity in the Circular Pattern is massive, I tried the Optimize alternative too, but it still took about 2-3 minutes to complete. Try to start off with just 5-10 in the Quantity field. It may not get the wanted result, but at least you know the Quantity is the problem.

[@Darlo-el7ph]

Sorry man, that music

[@MADAboutDesigns]

Sorry for using that.. That was one of my old videos. My current videos include commentary, kindly watch them. I am sure you gonna like that. Thanks again for the feedback ❤️

[@KaraokePubmain]

wow

[@antonkieser4585]

Very good however the music doesn't help and it's done way to fast for people to follow. I would suggest can the music and rather talk viewers thru the process ....

[@BlackSmokeDMax]

Even if you don't talk, though i would prefer if you did, can the music.

[@MADAboutDesigns]

These are my old tutorials.. kindly check my previous tutorials, they are elaborated clearly

[@No1sonuk]

Click on the speaker in the bottom, left corner. Music goes away. ;)

[@MADAboutDesigns]

🤣

[@ascari100]

Precise and fast. If you really need this video to be slower then you dont really know the basics of fusion 360.

[@MADAboutDesigns]

Thanks for the feedback brother. This was one of my old video. Kindly watch my recent videos you gonna love them

[@bennylloyd-willner9667]

@@MADAboutDesigns Yup, I'm just watching a newer one and it is calm, soft background music, and you talk us through the tutorial well. Kudos on evolving your presentation skills 👍. I like up'n'coming smaller channels so I subbed for sure 👌

[@Hybrid_Moe]

to fast for a tutorial...

[@MADAboutDesigns]

Will take care from next time

[@VivianVarghese]

@@MADAboutDesigns No, It's Perfect. anyone can slow the video and pause . Not wasting time by talking over it and straight to the point. Great job!

[@hedsy]

Too fast to follow! Slow down!! Very aggravating. Thumbs down.

[@bennylloyd-willner9667]

If it is too fast for you, it doesn't necessarily mean it's bad for everyone. I think a thumbs down for not creating exactly what just YOU want is a bit harsh, just don't thumbs up it. More positive love on the Internet ❤❤❤😁