Fusion 360 - Structure

Structure with Fusion 360

[@slo2flo860]

This is AWESOME! Thank U zillion times + extra million! Short and clean video!

[@anthonybiscarrosse2977]

Merci pour cette vidéo qui comme d'habitude est topissime. C est impressionnant toutes les ressources de fusion 360 !!! 😍

[@JasonSuterOssum]

Thank you for sharing, this is such a clever technique, I had no idea you could use the edges of solids to create pipes! No more crazy 3D sketches for me!

[@starboy5935]

Great work! Thank you!

[@sennabullet]

really great! thank you so much for sharing

[@francois62940]

Encore une fois très belle vidéo 👍🏻

[@gearbear9441]

Neat stuff! Thanks for the knowledge!

[@CR4FTVR]

thank you just saved me so much time

[@MrChrisDonnelly]

Brilliant walkthrough... it's a little different now, as the others have suggested below, but I figured it out. It really is so fast to make these kinds of forms. Thanks so much. 🙏

[@TeunSegers]

Usually I try to build something based on the thumbnail... not even close. Well done!

[@markg1531]

Genius! Thanks.

[@vmman]

Nice work man

[@ARTYFUSION]

Merci Etienne pour ta nouvelle vidéo

[@SebaQuiros]

Nice. Did you print it with supports for the top?

[@sergeybob3224]

Merci !

[@slimknight_]

This is nearly voronoi (if that's how you spell it), awesome!

[@Koni-lm6hz]

Good thing! But i have a Problem with the Construction. After finishing pipe is it not possible to convert the T-Spline in BRep. There comes a fail. Its not possible to convert it "Edges are crossing". Is there another solution? I want to print only the T-splines, like the print in your Video. Thanks for your help

[@jang1542]

Wow!!!

[@user-iu9yw8nc5d]

Nice

[@GiovanyFernandez]

Hello Etienne, That really is a great way of designing organic shapes basically from any base shape. However, since the version you used is older than the current one, we're getting the following message when clicking on "Finish Form": "T-Spline model failed to convert. If you continue the model will not display in the parametric workspace. You can return to the Sculpt workspace to fix the errors preventing conversion." In other words, unless we have no errors with the T-Splines, we are not allowed to convert the Form into a Body. Any ideas to go around this obstacle? Thanks in advance.

[@pocholomanalac9561]

Exactly my problem too, hope we hear from him

[@ericch4811]

this is so cool!!! but I can't find "mesh to BRep" in 2021version(2.0.10253), I only find the "BRep to mesh "

[@jaqueman9025]

nice

[@starsys14]

Bravo ! Je n’avais pas non plus pensé à utiliser la fonction tube. Les membres du groupe John Frogg m’ont orienté vers vous pour une modélisation. Est-ce que je peux vous envoyer une capture d’écran ? Je ne sais pas comment l’aborder et j’aurais bien besoin de vos conseils. Merci d’avance.

[@petrowolke]

The problem is, that this method can easly give errors when trying to convert a brep body

[@ckivang]

yes ,i agree too but i fixed it in Edit Form , just moved point, apply a small rotation to not have overlapping faces (interpenetrations).

[@varunr6765]

I'm not able to find the mesh option in Fusion 360. Please help. I have the latest update.

[@afifsalam2757]

Turn off design history

[@davidchanget2563]

my Fusion 360 version doesnt show a mesh tab

[@4sstylz]

Same for me, did you find a way ?

[@davidchanget2563]

@@4sstylz yes I did. You have to turn off design history first.

[@tettla]

bonjour je suis vos tuto afin de me perfectionner et je bloque sur celui ci car la fonction de sélection des arêtes ( Edge ) 1"32 dans votre vidéo ne fonctionne plus chez moi est-ce un problème de maj ou un paramètre que j'aurais zappé ? malgres avoir rétablis les paramètres par défauts. merci de me tenir au courant si vous avez le meme soucis avec la derniere MAJ

[@etiennek]

peut-être avez vous oublié de faire mesh to brep à 1'17" ?

[@4sstylz]

Un mec a proposé une astuce : Sélectionne un seul edge, puis utilise l'outil sélection pour faire « inverser la sélection ».

[@user-RaahNeko]

Cool! but I can't select only Edge after checking "Select Edge Priority" at 1:30...

[@etiennek]

make sure you did mesh to brep at 1.17, maybe is that ?

[@user-RaahNeko]

@@etiennek Thank you for reply. Yes I did mesh to brep. I can not select edge by using select window (drag with left button). I can select edge one by one. So, I tried alternate way. I select one edge with left click and select "Invert Selection" in selection tools then I select first edge again. Finally I can select all of edges. ^^

[@rbender49]

@@user-RaahNeko I've got the same issue

[@4sstylz]

@@user-RaahNeko Thank you for the tips !!!

[@AidanShaffer]

features are out of date as of fall 2023

[@Oggies100]

I wouldn't have thought of piping a mesh(doing it in model space now), great idea. I am doing this challenge, kzbin.info/www/bejne/fYeqd2egaNqjeac and planing on piping(model) the triangles. I would be interested in your workflow after the challenge is over of course. Thanks again for sharing.

[@RickDrew]

2022: most of these options are gone

[@rebe7800]

Very very very BAD.

[@3dprintum968]

Great work! Thank you!