How to Design a Lutron Homeworks QSX System // Complete System Design Package [New] (June 2022)

[@elmoselyee]

This is hands down the best Homeworks QSX video I've seen. While I don't plan on doing the design or install myself, as a homeowner who is planning on a new build in 1-2 years, this gives me all the information I need to be able to understand costs and how to give clear instructions to my service workers.

[@adelux]

Hi, Many thanks for your feedback and kind words! That means a lot! Glad to hear this information will be useful for you. Even if your project happen in a couple of years I'm pretty sure the "principles" will remain likely the same, as it always been actually. Good luck with your new house project!

[@eliporter3980]

I'm in the process of renovating my house and this tutorial was incredible. Thanks for taking the time to put this together, I can tell it took a lot of effort.

[@adelux]

Thanks for your feedback and kind words🙏🏾 I’m glad have been able to help a bit. Good luck with your project 👍🏾

[@TheBuckeye36]

I’m in the process of updating my old HW Interactive system to HW QSX. This was a very good tutorial of what’s required so I can save $$$ thinking about the design early on. Much respect!

[@adelux]

Thanks 🙏🏾 for your comment and feedback. I’m glad the video helped. Start with design for Lutron HomeWorks QS will definitely save you money 💰. Good luck with your project 👊🏾❤️

[@tomporter114]

Feels weird to have the job I’ve been doing for the last 10 years laid out on KZbin like this (with such great production value).

[@adelux]

Does feel weird right!? There’s should be more contents like this to support our industry. I really enjoy producing those. Thanks for your comment ✌🏾

[@joshscholl2219]

Thank you for taking the time to teach us with a well thought out and put together video. That was AMAZING and super informal, thanks again. Gets a subscribe from me.

[@adelux]

Thank you so much for your comment and feedback! Glad to hear that this has helped✌🏾thanks again

[@TariqKhan132]

impressive! The best video to understand Homeworks design

[@adelux]

Thank you very much for your kind words 🙏🏾

[@lqqkout8214]

Beautiful guide, terrific voice, great graphics! Thank you so much for this video :)

[@adelux]

🙏🏾🙏🏾 thank you so much for your feedback and kind words😁

[@sadamsaleem9089]

I know the system of KNX and ZigBee very well. And our competitive projects have Lutron specified. I thought it was a complicated system. But it looks like very easier than others and your explanation and videos are nailed it.

[@adelux]

Thanks for your comment. I’m glad it all makes sens to you now. Sometimes things are easier than we think. Keep on learning and good luck with your projects. ✌🏾

[@sadamsaleem9089]

@@adelux need more details and schematic of this system (G+20 residential tower projects)

[@adelux]

You probably need a lutron professional to help you out?

[@jozeppejostko]

Xavier is at the highest level as always, great video

[@adelux]

Thank you very much 🙏🏾🙏🏾

[@africanrat0078]

Thank you so much for the effort you put in for this tutorial

[@adelux]

Thank you so much! It was such a great experience to put it together - I’m glad you’ve found it useful 👍🏾

[@blu-starinstallsavllc9414]

Great stuff!!

[@adelux]

Glad you enjoyed it 👍🏾🙏🏾

[@francyrussllanto6286]

I like this video tutorial, much better if you also show how to link keypads to the actual keypads then how to upload

[@adelux]

Thanks for your comment👍🏾This tutorial focuses on design. In a future video I’ll focus on keypads types and connections ✌🏾

[@Muzaffar_98]

Great video! We have some problems between occupancy sensor and palladiom keypad. We couldn't use them correctly. For example I enter bathroom and lights turn on by occupancy sensor then i left bathroom during a minute and i turn off the lights by keypad. If i forget something at bathroom, the light won't turn on when i enter bathroom during a minute. That's confuse me. I don't still know what is the problem here. If you enter bathroom after a minute not (50 sec or 30 sec) , the lights will automatically turn on by occupancy sensor.

[@genevahometechnologiessupe7492]

Très bonne explication pour commencer un design Lutron Homeworks QSX. Merci et Bravo !!

[@adelux]

Merci beaucoup pour le feedback!

[@kshuvam63]

The video was really helpful I had a follow up question Does RRD-3LD-SW (Radio RA3) device work with just the QSX processor ?

[@adelux]

Thanks for your comment. Not to sure as we don’t have RA3 here in the uk and no opportunity to test that. I would advise you ask your local lutron rep.

[@StreetsGC]

Hello sir, Need some help/advice after burned-out module replacement for 1 light group (LQSE-4S5-230-D) in manual mode all lights work from the module the application Lutron RA2+HWQS can see switches and lights but cannot control them what to do? seems like it needs to be mated to my system, any tip where I can find manual or something how can I do it myself?

[@adelux]

Hi, I would suspect a loss on the communication from the lutron cable here. Try to re-address the module. If that fails check your communication cable ✌🏾

[@chimkodesri1982]

Hello sir... for residential use Automation, (KNX/SAVANT/CRESTRON) which is good for a project of G+2 building and area of 5500 sqft Plz suggest

[@adelux]

My point of view today is the same. All those brands are good - it will all depends on your capacity of designing, installing and programming your system based on your client requirements 👍🏾

[@naseerakk2765]

Hai Sir Thanks You very much for you video can I ask you something that can I program Athena edge processor with this design software ??

[@adelux]

You need Lutron Designer + ✌🏾

[@juanrios3613]

amazing video💥💥💥, i learn a lo lot about that set up. i have a question , can you use a Module with Radiora2?

[@adelux]

Many thanks 🙏🏾😁 If you refer to din rail modules, they are not part of RadioRA 2 range of compatible products. Hope this helps 👍🏾

[@gregorywahn804]

Very good video, thanks!

[@adelux]

Thank you!!

[@confusionist22]

If I have a Lutron Homeworks QS system already, would it be possible to replace the QS processor with a QSX processor without replacing any other parts?

[@adelux]

Yes it is possible. If it is a pure Processor upgrade from QS TO QSX Just need to change processor. However If your existing QS is already an upgrade from HomeWorks illumination to QS and you’re using software licences to use, let’s say, illumination keypads on your QS system at this point it won’t be possible. You will have to change the keypads. Hope this helps 😉

[@LanceSobina]

Was wondering what software you are using for your floor plans ?

[@adelux]

Microsoft Visio 👍🏾

[@LanceSobina]

@@adeluxthank you 🙏🏽

[@chrisfinkbohner]

thanks. setting up DALI.

[@emmanuelantique862]

What types of wires should be use for DALI loop signal

[@adelux]

DALI requires 2 core cable. Then depending on distance max etc you will need to check what section of cable will fit best your application. This is also in case you choose to have your Dali fittings to be mains powered separately. Alternatively you can also choose to use a 5 core cable to power AND for Dali communication. Hope this helps 👍🏾

[@munishmithaiwala3598]

very good video thanx. i need to knw how can i save file on processor

[@adelux]

Thanks for your comment. You will have to extract the database from the processor.

[@enriqueportillo4435]

Great video, how can I have access to the software program?

[@adelux]

Thanks! I believe you need to get in touch with your local Lutron representative ✌🏾

[@Live-Peacefully-Healthy]

Hi bro, How are you. I am currently using lutron Quantum 2.7.375 application. How can I upgrade to latest version

[@adelux]

Hi! Thanks for your comment. I guess you need to contact your Lutron rep for this. 👍🏾

[@ppoli081]

The only problem with using area scenes is that the Homewoner cannot edit them on the app. The solution is to use Zones.

[@adelux]

Correct! The idea here, as mentioned, is to optimise first day of commissioning with a quick way to program keypads before getting to site in order to test installation. Once we got everything working then we can use “zones”, create lighting scenes and complete all advanced programming. Whatever way work best for the Lutron guy. Thanks for your comment ✌🏾

[@JoseSantos-id8bg]

Excellent videos, I really appreciate every information you sharing. I got my radio ra2 and 3 training but I need the homeworks training. Can you help me explaining how to do it. Thank you!!

[@adelux]

Hello! Many thanks for your feedback. For Homeworks Training, I guess you will have to get in touch with your local Lutron Rep/Distributor which I'm sure will be able to guide you. As for me, I am based in the UK and I left Lutron 10 years ago, so no longer familiar with their training program. Good Luck!

[@PierreYoury49]

Feel like I need to go to school anymore.

[@adelux]

Hahaha thanks

[@vessbakalov8958]

Can you control QSX from a PC as the customer?

[@adelux]

As a customer you can control QSX from the Lutron App. The app allows you to reprogram some of the functions. Thanks

[@vessbakalov8958]

@@adelux thanks for the reply. I was wondering if there is also a web page or such that I can use on a PC.

[@adelux]

No such thing