Lutron Homeworks QSX System Design with DALI Light Fittings // Adelux (NEW) [2022]

[@mohammadsohail3353]

Other than anything else...I adore your laughing in intervals 😊

[@adelux]

😂😂 that’s making me giggle 🤭 Thanks for the kind words 🙏🏾

[@soothingsoul5988]

Really good video, we work a lot with DALI and you nailed it. By the way, Lutron released a notice that from now on, the LQSE-2DAL has been discontinued and now its something like LQSE-2DALUNV which need HWQS ver 15.1.

[@Andres.olguin]

Thanks for the video Xavier, very clear, and instructive. Indeed this information is so important.

[@adelux]

Thanks 🙏🏾 Andres

[@JoseSantos-id8bg]

Your videos are amazing and super helpful. I'm learning a lot from you. Thank you

[@adelux]

You’re very welcome! Glad it helps

[@JoseSantos-id8bg]

What's the difference between dali and ecosystem?

[@AaronLandauav]

What 24v dali drivers do u like for 24v hi output and multi channel products. I have some large ceiling coves

[@elbakriabdou6330]

This video is very important for me thank a lot Xavier

[@adelux]

You’re very welcome 😊👍🏾👍🏾

[@gamelover2594]

have a question if the LED driver output is max. 48VDC, LED rating should also be 48VDC? Thank you!

[@AsadMulla]

Great video. How do you address the dali drivers?

[@adelux]

Well this time you need to check the programming video 😅 👉🏾How to Program DALI Light on a Lutron Homeworks Lighting Control System - DALI Addressing - NEW 2024 kzbin.info/www/bejne/jYnJh2R4bpqBj9U

[@PM-di5yv]

Awesome content

[@adelux]

Thanks !

[@johnm92627]

Do you have a wiring diagram of the wiring going from the Dali Lutron module to the light fixture and also what is the recommended wire?

[@adelux]

This is shown at the beginning of the video isn’t it? Wiring depends on lengths etc. Best to Google for full cable specs

[@mauriciomartinezquintero4633]

Great video. I would like to see one with DMX control.

[@adelux]

Yes me too! I’m working on it! Thanks for your message!

[@bashash83]

on your video you are showing the wiring example for different zones on one loop on T-Tap connection. shouldn't the wiring be looped from driver 1 to 30 on daisy connection and the last connection be to the DALI module?

[@adelux]

DALI is topology free

[@HarmonicFrequencyUK]

Amazing content as usual!

[@adelux]

Thanks 🙏🏾🙏🏾

[@pennycents9592]

thank you for this. For the Lutron RA2 system, do we need the fitting to have Dali?

[@adelux]

No RA2 Sélect is not DALI compatible

[@fantronicsable]

Hello Bro very good presentation can you make a video that design QP -2L Athena Edge Processor ? and about athena design software if there is

[@adelux]

Hey bro I’d love to and will do once someone help me getting the kit

[@arikadiusz]

what about zone numbers (Zone# column)? Are they importatnt when you assign loads to a loop? I always thought that zone number coresponds to DALI group number and has to be unique ? Is Zone Name alone enough to ensure that you won't end up with mixed up circuts (becase they will have the same zone number in different rooms)?

[@adelux]

Good point! Zone name is automatically assigned to a zone #, this happens behind the scenes (that’s why I chose not to display that zone # column in the video, because no changes are needed there). Any zone name within a room has to be unique. So once you create your Dali zone and add the number of addressable driver to it and then assign that zone to the correct loop it is wired to, you good. I’ll post a dali programming video next week so stay tuned ✌🏾

[@cyrusmohammad9639]

Thank you for informative video. Is there Dali controller for RadioRa3?

[@adelux]

I don’t think there is - we don’t have RA3 in Europe yet

[@bougiekendra0]

Any idea how to get trained on Dali please?

[@adelux]

Good question! I don’t know 🤷🏾‍♂️ that’s why I’m trying to share what I know on this channel. More to come on Dali, DMX install and program ✌🏾

[@pterichard2286]

my question is, say in 1 loop you have 15 discovered Dali driver in a specific area, how do you map out specific DALI driver/fixture (i.e fixture #13) to match with the database fixture 13 you entered?

[@adelux]

That’s a very good question! You would that when addressing the Dali drivers (from the addressing screen). This screen will allow you to flash the drivers one by one which you will do until you find the one you want. Then, you will assign it to the one you want in your list of drivers. Voila ✌🏾

[@garyyuill5470]

Awesome video as usual. What design software do you use for your floor plans?

[@adelux]

Thanks 🙏🏾. I use Microsoft Visio

[@ilseparatio2963]

can I use Energi Savr Node app to program a DALI module?

[@adelux]

Yes but only in a ESN application. In an HomeWorks application you must use lutron designer software

[@ilseparatio2963]

@@adelux Thanks for your quick reply!

[@electricalservicesmaroc]

Tres interesting

[@adelux]

Merci!

[@BERNARDMUCHA-if2hj]

Please share tutorials for Dali

[@adelux]

There are plenty on the channel!

[@lxvlog]

Tel me about ACR area control for lighting control?

[@adelux]

What would you like to know ?

[@electricalservicesmaroc]

Thanks

[@adelux]

You’re welcome 👍🏾

[@rastafire8]

J’ai pas compris la phase de commisioning ?

[@adelux]

Cette vidéo est plus axée sur le design. J’en prépare une nouvelle avec le commissioning du DALI…. Très bientôt

[@lxvlog]

We used Dali with cooper lightening co based uk product is better .