How to DESIGN an ACADEMIC POSTER in Microsoft PowerPoint

[@sys8656]

legend! thank you sir. Im 17 and I've got my first scientific poster event, where I am presenting langendorffs experiment, and this video has relieved a lot of stress. God bless you

[@MichaelOkereke]

Fantastic! I am glad it helped and good to see you at 17 already designing posters on the langendorffs experiment. Well done!

[@sherryshangguan9046]

Thanks so much Dr Okereke! I'm a student at Greenwich and your video and template come to rescue just in time!

[@MichaelOkereke]

Glad it was helpful! Well done Sherry.

[@yemdoustephane4301]

Thanks very much. I am presenting my first poster at the Hungarian university of agriculture and life sciences . This really helped a lot.

[@MichaelOkereke]

Glad you found it helpful. Good luck with the presentation.

[@isaacowusu3845]

The best I have seen so far. Great job

[@MichaelOkereke]

Glad you liked it, thanks.

[@AbdulkareemMusaAlabi]

Thank you, Dr. This is very helpful.

[@MichaelOkereke]

Glad it was helpful!

[@victorakongwale4440]

Chukwu gozie gi! You are good. You saved me, this weekend !

[@MichaelOkereke]

Thanks. I am happy you found it helpful. Daalu!😀

[@olubukolaadegbe9876]

Thank you for the simple and useful presentation and template too 🙏

[@MichaelOkereke]

You are welcome 😊

[@InesSousaMarques]

thank you, Professor! it was very useful

[@MichaelOkereke]

Thanks for this. Glad it helped.

[@AnimalZone247]

Thank you very much. Very helpful 👍

[@RobertTetteh-v2u]

wowwwwww. Thank you. Good teacher

[@MichaelOkereke]

You are welcome!

[@Afrizalr]

Thank you for explaining this.

[@MichaelOkereke]

Thanks.

[@alinuh5564]

Many thanks really simple and useful

[@MichaelOkereke]

Glad it was helpful!

[@RashidRashid-ye2uc]

Awesome work!

[@MichaelOkereke]

Thank you! Cheers!

[@oyetolaemmanuel-ebikake1128]

Wonderful 😮. Thanks a million 😊

[@MichaelOkereke]

Thanks a lot too.

[@unleashed-engineering]

Nice summary!

[@MichaelOkereke]

Thanks.

[@عمارياسينالجبوري-ط7م]

Thank you very much, Dr. Michael, for these good lectures. I have a question. How do I determine the volumetric fraction of two materials in the case of preparing a slide or layer consisting of polymeric material and fibers at rates of 30% and 70% in the Abaqus program? Is there an explanatory video available?❤❤❤❤

[@MichaelOkereke]

Hello, thanks for your comment. I am a bit unsure about what the question is about. If you want to determine the volume fraction of two materials (composites), you can do so by finding the weight contribution of each of the phases that make up the system. The weights of say E-glass fibre and the weight of the matrix, say Epoxy. With those weights, you define the weight fractions. You also need to know the densities of the constituents that make up the composite. If you want to see how to make the conversions, a quick google search will help you as you can see from here: sites.google.com/site/compositematerialsdesign/home/weight-and-volume-fractions. I am not sure if this is what you are looking for. Good luck with the research.

[@daoudanikiema9852]

Dr, thank you for this video. For the next, can you do a video about how to create images, curves and figures for scientific publication?

[@MichaelOkereke]

Good suggestions thanks

[@kibromweldu]

great job!

[@MichaelOkereke]

Thank you! Cheers!

[@AmmarYassenBurjes]

Thank you very much Dr. Michael I am very grateful to you for your answer I am very interested in your valuable lectures My question is in the picture attached to this message about how to determine the value (percentage %) for each material in the preparation of the composite material, whether layer, slice or cube. That is, anywhere in the choices of the Abacus program when we specify these values, that is, when we limit the dimensions and density, and with what Young's modulus and the Poisson's Modulust, because I searched a lot and did not find anyone who explained it. Where I noticed that in the video I posted, the value of polypropylene was 40% and fiber was 60%, how did this happen? This is in the case of two materials, but if it is three materials, it means two solid materials with a polymeric material, and I hope that you will help me with it, and I am very grateful to you

[@MichaelOkereke]

I understand the question now. With regards to the volume fraction of the fibre and matrix constituents, you have to determine this yourself when you design the composite. It is a volume fraction that means in creating the geometry, you have to decide how much of the volumetric space (virtual domain) is going to be occupied by the fibre and how much by the matrix. The volume fraction of 40% fibre means that only 40% of the volume will be occupied by the fibre. How do you then prepresent this? So, if you have a space of 100 x 100 x 100 overall for the composite, you ahve to find how many fibres will occupy the fibre to give you a 40% volume fraction. You have to make some calculations and if you look at my videos on RVE modelling of UD composites, you will see how to do the calculations. If the calculation shows that 5 fibres are required (for example), then you make sure in the 100x100x100 space, you create cylinders that represent the fibres based on their radius that will cover 40% of the volume. The remaining space will then be 60% which is the matrix. For a three-constituent system, the same things holds. Clearly, where you need to get the percentages i.e. 40% and 60% will come from a manufacturer's data sheet for the material you are using. In the case of the videos you refer to, I got them from the publication referred in the video which stated what percentage is the volume fraction for the fibre (E-glass) and the matrix (polypropylene). For the system you are testing, please find those percentages yourself. If you do not have it, then you can decide how you want to give percentages to the parts provided all of them add up to 100%. That is my suggestion.

[@doreisbest9663]

Thanks you for tutorial!

[@MichaelOkereke]

You are welcome!

[@crizish]

Nice job!

[@MichaelOkereke]

Thank you! Cheers!

[@Maha-k8i]

Thank you sir..itz really awesome..🎉

[@MichaelOkereke]

Most welcome 😊

[@RosemaryMustafa-m9k]

Thank you Dr, for nice presentation. Am trying to go with your flow but when i insert the text in the texboxes.the texts becomes of very low size , not seen even after increasing the size to 28. Help me

[@natasharasebotsa7300]

@@RosemaryMustafa-m9k did you get help?

[@MichaelOkereke]

You will have to keep increasing it. At times 28 point might not be the same. This is because the poster size is quite large so small fonts will not show well.

[@flavour833]

Thank you 😊

[@MichaelOkereke]

You're welcome 😊

[@divinetarla3995]

Thank you so much

[@MichaelOkereke]

You are welcome.

[@chaucerflanders7918]

Hi, thanks for the video; I am doing a research poster at the moment; would you like to have a look at it to see what you think? I much appreciate it.

[@MichaelOkereke]

Sure thing!

[@TonyKirimi-th5yj]

why did you put the shhh sound in the video?

[@MichaelOkereke]

It simply a sound effect..

[@GILFRANKWORLD]

Can I get your contact?

[@MichaelOkereke]

Hello, I suggest you connect with me via this option: cmvig.cmvideos.org When you sign up to the CM Videos Insider group, you would receive a welcome email and you can contact me via that means.