How to determine a base using PPP Method | EMLID Reach RS2 GPS Training.

  Рет қаралды 4,413

SOM Survey Instruments

SOM Survey Instruments

Күн бұрын

How to determine a base using PPP Method | EMLID Reach RS2 GPS Training.
Have you ever found yourself working in an area you are not familiar with? Or in the middle of nowhere? Determining a position on the ground is crucial in order to do your survey. This is possible using the global service called, PPP Method - Precise Point Positioning Method with the Emlid Reach RS2.
#surveying #surveyinginstruments #emlid #somsurveyinstruments #RS2 #PPK #GNSS #RTK #GPS #NTRIP #NTRIPSTATION

Пікірлер: 7
@guillaumeberthier915
@guillaumeberthier915 Жыл бұрын
Please, would you developp about absolute accuracy, on what do you back to the office ? Where do you upload it ? many thanks
@billyandriam
@billyandriam Жыл бұрын
Great video! A few questions if you don't mind. What is the accuracy of the Base coordinate you received when using PPP? I'm using an Emlid REACH RS+ which works on single L1 band unlike the RS2 which you use in your video. Also, what PPP service would you suggest to use especially in the southern African region. I am in Madagascar so geographically, it's about the same so I presume that the PPP service you use in SA would provide the best result for Madagascar as well. This is actually very useful to me because our geodesic survey points are poorly calibrated around here, and are unusable most of the time. And we don't have a CORS network available just yet. We also have 2 IGS reference stations from which I can fetch RINEX files but they are too far away most of the time and are not practical in the slightest. Thanks again SOM SURVEY!
@brunonhandu9927
@brunonhandu9927 Жыл бұрын
Hello, did you manage to process PPP in Emlid studio?
@billyandriam
@billyandriam Жыл бұрын
@@brunonhandu9927 Hi! I read from the Emlid Docs that it will reach at most 30cm for the RS+ to do PPP. And that requires at least 4 hours of logging on-site. I gave up on it since I knew that I will never reach anything below 30cm of absolute accuracy. Instead, I already tried Emlid Studio with PPK and I can say it works fairly well (I still haven't managed to obatain E,N,U coordinates but it gives LLH).
@TheNicobux
@TheNicobux Жыл бұрын
Hey! Thanks for the video. I have the same questiin as Billy. I am based in Mauritius myself.
@AngelCuenca
@AngelCuenca Жыл бұрын
Pleno trabajando con estos equipos
@postiveminds9864
@postiveminds9864 Жыл бұрын
Add Rx model
Setting up a Base Station Over a Known Point
13:48
Mangoesmapping
Рет қаралды 17 М.
🕊️Valera🕊️
00:34
DO$HIK
Рет қаралды 2,4 МЛН
Worst flight ever
00:55
Adam W
Рет қаралды 53 МЛН
The selfish The Joker was taught a lesson by Officer Rabbit. #funny #supersiblings
00:12
Funny superhero siblings
Рет қаралды 11 МЛН
Real-Time Kinematics Explained
9:09
SparkFun Electronics
Рет қаралды 38 М.
Static and PPK Processing with Emlid Reach RS2 and Emlid Studio
11:22
Jeremy Maurer
Рет қаралды 1,2 М.
How to Do the Traverse with N1 Total Station
3:57
SOUTH Surveying & Mapping
Рет қаралды 8 М.
Getting Started with Emlid Reach RX
8:43
Map Gear
Рет қаралды 3,3 М.
Setout using Emlid Reach RS2
5:15
Mangoesmapping
Рет қаралды 17 М.
Using Base Shift in Emlid Flow
12:27
Mangoesmapping
Рет қаралды 1,2 М.
Emlid Reach RS3 Full Review After One Month
20:18
Flying Surveyor
Рет қаралды 7 М.
GNSS Positioning Techniques SPP, SBAS, PPP or DGNSS, GBAS, RTK
10:41
🕊️Valera🕊️
00:34
DO$HIK
Рет қаралды 2,4 МЛН