How to Disassemble and Reassemble a SIG Sauer P365

[@george5120]

This is the only tutorial on KZbin for the P365 that is worth watching because this narrator is the only person among them who knows how to teach. Excellent. A learned a lot from him, here, but didn't learn anything from the others.

[@UBRArsenal]

Hey George, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@peadookie]

Considering adding a p365 to my safe and wanted to see the takedown process, but had to leave a comment - this is an _excellent_ how-to on field stripping the p365 for total beginners. Safety check, named the parts, great explanations. Great job helping the new guys. Bravo.

[@UBRArsenal]

Hi Pea, reading this makes me so happy. I try to make my videos work for everyone. I'm so glad the video helped out. If I could make a suggestion, if you decide to pick up the P365, go for the P365X without the optic in the box. That one comes with a better grip and it's optic ready. When you're ready to put an optic on, my suggestion is the Holosun 507k x2. Also, I have a ton of P365 content on my channel for you to check out. Thanks so much for watching and leaving a comment. Have a great day.

[@peadookie]

@@UBRArsenal much appreciated advice!

[@Alwayscatlike]

365@@UBRArsenal Just got my new P365. I am 105 lbs and very petite. I carry my Glock 43 and I love it however I have to wear a sack to conceal it. lol. I am so excited about this cute little "dangerous thing. I love the recoil for my body type, it's perfect and the grip really fits my hand so it feels like part of my hand and not something I am holding. Love, Love, love it. All my huge x military and cop buddies were trying to convince me to buy the firearm "they" like, I did not listen. This will protect me! No problemo. Thanks for the video, very good with the details...that's what I loved. WWG1WGA.

[@unclejuniorsoprano]

That small lever that you push down when disassembling the gun can be a problem when you're reassembling it. You explained how to get that lever to snap back up into place very well; by pushing up on the slide stop/release level as you pull the slide back. Great explanation!

[@UBRArsenal]

I’m glad the video helped out. Thanks for watching and leaving a comment. Have a great day.

[@jeffreyvanhorn1996]

This is exquisitely clear and concise. This is how all teachings should be done. Actually, this is perfect, especially for one unfamiliar with any of it. Thank you so much!

[@UBRArsenal]

Hi Jeffrey, I'm so glad you liked the video. Thanks for watching and leaving a comment. Have a great day!

[@novembers]

Just got the 365-.380. Love it. This is the first time for me to do the breakdown. You kept the gun close to the camera (which I liked) so I could carefully see everything. Well done.

[@UBRArsenal]

Hey Nov, I’m so glad the video helped out. Thanks for watching and leaving a comment. Have a great day. 🤜🤛

[@jtwilliam7124]

I love this guy great video. If Bob Ross did pistol field strip videos , this is it. I learned to break down my gun but also felt really calm and at peace. Thanks

[@UBRArsenal]

I'm really glad you enjoyed the video. BTW, your comment made me lol. Thanks for leaving an awesome comment.

[@smitty0711]

“Bob Ross” haaa! Love it!

[@shawnshipstad2184]

I agree, I love your Bob Ross analogy. Right on. I might go on to further your analogy by Fred Rogers. LMAO!!

[@ginabrown551]

Thank you so much for your video. I just bought my P365 and have my CCW class tomorrow. They told us we needed to disassemble and assemble gun before class. Thank you so much again. Your instructions were so easy to follow.

[@UBRArsenal]

I’m so glad the video helped out. Thanks so much for leaving an awesome comment and I hope you subscribed. :)

[@Conriocht]

This was very well done. The instructions were concise, clear, and thoroughly explained. FYI, you just helped me finally decide which .380 to buy---Bersa, Ruger, Sig Sauer, S&W, or another Walther (which I previously owned but sold). Thanks for the help!

[@UBRArsenal]

I’m glad the video helped out. Thanks for watching and leaving a comment. Have a great day.

[@Zaloomination]

Clear video, glad you went over the problem I encountered with my new p365x, the disaddembly lever returned to 3 oclock when the slide was off and I couldnt get the slide all the way back on. Your vid and the helpful commenters addressed that. So thank you!

[@UBRArsenal]

I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@hansdelbruck8286]

I was having trouble removing the top. As you said I might need to disengage the slide catch lever and that's what worked. Appreciate it, thanks for the video.

[@UBRArsenal]

Hi Hans, I’m so glad the video helped. Thanks for watching and leaving a comment. Have a great day.

[@bentonfoster886]

Shows every step of the process, common problems and solutions. Doesn't get any better

[@UBRArsenal]

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@UBRArsenal]

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@mls3555]

This video helped me so much!! As a new gun owner, I appreciate that you point out every step so clearly. As a lady SigP365 owner I have discovered that my thumbs aren't quite long enough to apply pressure to the slide lock as I'm locking it back(to reassemble). Very frustrating. I will keep working on it to see if I can find a point of leverage that works. In using it, i typically have no issues locking it back or doing any thing else; only when reassembling. Working on strengthening my hands too, hope it will help. I don't ever really feel like I have weak hands though

[@UBRArsenal]

I’m glad you liked the video. Keep in mind your P365 may become easier to actuate the slide once it really breaks in. Thanks for watching and leaving a comment. Have a great day.

[@bonitaw4426]

Best Takedown and reassembly of any I have watched for any handgun. Great job.

[@UBRArsenal]

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

[@hgk2225]

Really well explained on how to reinstall the slide. Can’t tell you how many times I struggled with the reinstall even after watching other videos. Yours was slowly and clearly explained. Thank you

[@UBRArsenal]

Hey HGK2, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@ronupton2341]

Thank you for the kind reminder on doing this. Had not cleaned my gun for a year. Great reminder!!! We’ll done!!!

[@UBRArsenal]

You’re welcome. I’m glad my video gave you a reminder to clean your pistol. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

[@billybud9557]

Clear, concise, and no fluff..............a well made video, thanks

[@UBRArsenal]

Hi Billy, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@rogerwhiting9310]

There are 100 365 teardown videos on KZbin. I happened onto yours. Great job... made it easy... thanks.

[@UBRArsenal]

I'm really happy my video helped out. Thanks for the kind words and I hope you subscribed. Have a great day.

[@rogerwhiting9310]

@@UBRArsenal I did subscribe. I bought 2 365s ... for me and son in law. 1 extra 10 round magazine apiece. He didnt fire his but did load and eject probably 50 rounds. Mine... loaded the mag and it wouldnt chamber. I tried jackets and they loaded but jammed while ejecting after fire. After reading the manual it said clean BEFORE firing... so I cleaned it. The nuances of holding one lever while pressing another was new to me.... usually they snap together easily. I got so frustrated I put it away for 2 days. After your video I tried chambering rounds and some would and some wouldn't. After playing with it for 90 minutes I found the issue. The one short clip that was in package will not load unless you really work it. It wont eject after firing. At least I have the gun together and solved the question. The gun dealer is going to take care of it.... probably a new magazine. Thanks again.

[@UBRArsenal]

@@rogerwhiting9310 I'm sorry you're having so many problems. I hope the new magazine will fix the issue. If it doesn't fix the issue, keep in mind that you can contact SIG and they will take care of you. Also thanks for subscribing.

[@rogerwhiting9310]

@@UBRArsenal thanks. My gun store has contacted me with some info. It will be taken care of.

[@lepettitchateau8047]

I have subscribed mostly because “”Harry”” he’s got a fantastic voice, disposition, and teaching method that leaves absolutely no detail in question and he’s in my opinion far better than anyone else on KZbin. Cheers

[@UBRArsenal]

Hi Le Pettit, I have to say you made my week with this comment. These types of comments make all the hours I put into making the videos worth it. Thanks so much for subscribing and leaving this comment. I hope you have a great week too.

[@jctedsap]

You make it so much easier than other videos or reading the manual. I had mine lock up and after watching your video I think I know what I did wrong.

[@UBRArsenal]

Hey John, I'm glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@PeteMarckRealtor]

Great video. I just purchased this weapon and no owner’s manual so your video was SUPER HELPFUL! Thx.

[@UBRArsenal]

I’m so glad the video helped out. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

[@stoneypatchkid7734]

If the slide doesn’t go back, make sure the safety pin on the bottom back right of the frame is down.

[@fu102]

THISSSSS! Its on the inside/top behind the grip

[@dennis32711]

very good for people new to guns, clear and simple,tks

[@UBRArsenal]

You're very welcome, I'm happy my video helped. Thanks for leaving the great comment.

[@asaldana10]

UBR Tech great video. Thx!

[@UBRArsenal]

@@asaldana10 Thanks for the positive feedback. Have a great day!

[@davidodom9518]

Very clear and concise. Good camera angles. Good video. Thanks.

[@UBRArsenal]

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@jameslogan6127]

Excellent video ...one of the best I’ve seen. Slow, but not too slow, filled with just the right amount of detail and simple. I’m blown away. Thanks

[@UBRArsenal]

Wow, thanks so much for this comment. Im really glad you liked the video. Thanks again for leaving an awesome comment and I hope you subscribed. :)

[@jameslogan6127]

I am subscribed and I look forward to other how too videos. Specifically P320, P238, P938, and S&W MP 2.0. I’m new to shooting and love your method and approach.

[@UBRArsenal]

@@jameslogan6127 Awesome, thanks for subbing. I’ll put all of these guns on my list to get for videos. Hopefully GunPrime will start sending out guns again. 🤞🏼

[@edtrasatti835]

for me to take this apart and back together is a miracle!! BRAVO

[@UBRArsenal]

Glad my video helped. Thanks for the great comment. Don't forget to subscribe. :)

[@pbosche]

Perfect, I was following along to some degree and then I ran into that problem…before I could reach for my phone you offered the “if this happens to you..” Thanks!

[@UBRArsenal]

Hi Carp, Im glad the video was helpful and it had all the information you needed. Thanks so much for watching and leaving a comment. Have a great day.

[@SticksAndBlicks]

Simple yet educational for someone who may have not taken a pistol apart

[@UBRArsenal]

Hi SnipGo, I'm glad you liked the video. Thanks for watching and taking the time to leave a comment. Have a great day!

[@MazzaJ]

SO simple! and such clear methods. thank you Sir! i left the store so confused and not anymore.

[@UBRArsenal]

This makes me so happy to read. I'm really happy the video helped out. Thanks so much for leaving this awesome comment and I hope you subscribed. :)

[@josegunter2217]

Nice and thorough! My was able to do this on her first try without panicking. Thx!!!

[@UBRArsenal]

Hey Jose, I’m so glad the video helped out. Thanks for watching and leaving a comment. Have a great day.

[@chetmakowski463]

Thanks. The take down lever was killing me!

[@UBRArsenal]

I’m glad the video helped. Thanks for watching and leaving a comment. Have a great day.

[@joepinkston6842]

Very clear instructions, easy to follow! Now I need a video on how to clean and lubricate my new p365. First gun!

[@UBRArsenal]

I'm glad you liked the video. I have a video showing how to clean a handgun on my channel. Let me know if that works. Thanks for leaving a great comment and I hope you subscribed. :)

[@FreeWarrior_76]

Very user-friendly. You took the intimidation right out of it for this newbie!

[@UBRArsenal]

Hi Abigail, I'm really glad it helped you become comfortable with your P365. Thanks for watching and leaving a great comment. Have a great day.

[@WrektEm]

Great video, I just got me a p365, love the gun, and really enjoyed this video. He explains really well and can now say I safely know how to breakdown the p365.

[@UBRArsenal]

Hi Gary, I’m so glad the video helped out. Thanks for watching and leaving this awesome comment. Have a great day.

[@rabidcougar6465]

Excellent instructional for my new P365. Thanks

[@UBRArsenal]

Hi Rabid, Im glad the video helped out. Thanks for watching and leaving a comment. Have a great day.

[@willownelbach]

Love this! Straight forward and to the point. Very easy to understand. Thank you!

[@UBRArsenal]

Hi Willow, I'm glad you like the video. Feel free to check out the other P365 videos on the channel. Thanks for watching and leaving a comment. Have a great day.

[@anthonynaimoli5184]

Great video, got stuck on reassemble, video saved the day.

[@UBRArsenal]

Hi Anthony, I'm really glad you found my video and it helped you out. Enjoy your new trigger. Thanks for taking the time to leave a great comment and I hope you subscribed. Have a great day!

[@WittyBoiBeatz]

Very clear and straight forward instructions! Thank you

[@UBRArsenal]

Hi Nick, I’m glad you thought the video was helpful. Thanks for watching and leaving a comment. Have a great day.

[@kimkirtley5542]

You are a GREAT teacher!!!!!! Thank you!

[@UBRArsenal]

Hi Kim, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@3LeafCustoms]

Appreciate it. First time firing it today. Putting back together 3 different models makes, and this had me.

[@UBRArsenal]

Hi Anthony, Im glad the video helped you out. Thanks for watching and leaving a comment. Have a great day.

[@joek6791]

Short and to the point, well done

[@UBRArsenal]

Hi Joe, I’m glad you like the video. Thanks for watching and leaving a comment. Have a great day.

[@melvinmerkelhopper5752]

5:32 That takedown lever auto resetting is a nifty feature.

[@WoodShopStop]

Very good video Sir, very helpful and to the point. Thanks 👍🏿

[@UBRArsenal]

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@greghalter934]

My P365XL was having issues at the rear. I slid my finger over that back part and it worked. Thanks

[@UBRArsenal]

I'm glad my video helped out. Thanks for watching and hope you subscribed. :)

[@failboy117]

I literally just ran into the 3 o’ clock locking issue and had no idea how to fix it. I know this video is 2 years old but thanks

[@UBRArsenal]

Hi Barely, I'm so glad the video was able to help you out. Thanks so much for watching and taking the time to leave a comment. Have a great day.

[@johnthompson3377]

Excellent demonstration, sir.

[@UBRArsenal]

I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@risteardwest3384]

This video is great he takes his time and explains everything to you nice and slow on this sig P 365 it's a fantastic gun for their products are excellent you may spend a few dollars more but you only get what you pay for I give this video five stars thank you ⭐⭐⭐⭐⭐💯👍❤️☺️

[@UBRArsenal]

Hi Risteard, I’m really glad you like the video. You’re right, you paid a little more but get a lot in return. Thanks for leaving a great comment. Have a great day!

[@mmm70]

Excellent directions. Thank you!

[@UBRArsenal]

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@wesmanthetiger]

Thanks for the detail and tips! Very helpful!

[@UBRArsenal]

Hey Wes, I’m so glad the video was helpful. Thanks for watching and leaving a comment. Have a great day.

[@acme9538]

Good thorough instructions, thank you !

[@UBRArsenal]

Hi Ac, you’re very welcome. I’m glad the video helped out. Thanks for watching and leaving a comment. Have a great day.

[@GoHerping]

more simple than I expected, thanks!

[@UBRArsenal]

I'm glad you liked the video. Thanks for leaving a great comment and I hope you subscribed. :)

[@timterry3918]

Very clear and easy to understand.

[@UBRArsenal]

Happy to hear you liked my video. Thanks for taking the time to write this positive comment! Have a great day!

[@holtster3797]

Thanks for the video. Was scratching my head with mine when the take down lever got stuck in the closed position.

[@UBRArsenal]

Hi Holtster, I think that gets a lot of people. Glad the video helped out. Thanks for watching and leaving a comment. Have a great day and please tell a friend about the channel. 😁🤜🏼🤛🏼

[@Lost13]

Great video. Thanks for putting this out.

[@UBRArsenal]

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

[@jimholland1592]

Nicely done 👍

[@UBRArsenal]

Hi Jim, I'm glad you like the video. Thanks for watching and leaving a comment. Have a great day.

[@NickCouryphoto]

Great pace and super thorough. Thanks for this!

[@UBRArsenal]

Happy my video helped. Thanks for watching and the awesome feedback. Hope you subscribed. :)

[@NickCouryphoto]

@@UBRArsenal I absolutely did. I picked up my 365 yesterday, so anxious to take it for a spin...and then clean of course. ;)

[@whydotheathensrage]

thanks, i couldn't get the take down to 6 until i watched this

[@UBRArsenal]

I'm glad my video helped. Thanks for watching and leaving an awesome comment.

[@monkeyplayer1]

Yeah mine was really hard to push, felt a little too hard but after the first time it’s easier now. (P365xl)

[@toddlongo7066]

I can’t thank you enough !!!!! 👍👍👍👍

[@UBRArsenal]

I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@erikboing1624]

clear, calm and simple. Very good! Thank you!

[@UBRArsenal]

Thanks for watching and leaving an awesome comment. Don't forget to subscribe. ;)

[@shawnshipstad2184]

Excellent video-Thank you.

[@UBRArsenal]

Hi Shawn, I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@omardaniel1]

Dude I was messing with this XL for 30 minutes. I couldn't figure out why it wouldn't go back together. I had to push up on the slide lock. Thank you

[@UBRArsenal]

I'm glad my video helped. Thanks for watching and I hope you subscribed. :)

[@billythekid1729]

What is a good cleaning solution to clean P365 polymer grip? Mine has small cosmetic scratches from use.

[@zyzzuschrist3410]

Very good tutorial I was having trouble putting it back together lol 😆

[@UBRArsenal]

Hi Zyzzus, I'm glad the video helped you out. Thanks for watching and leaving a comment.

[@dbmurray603]

Great video and audio quality, thank you.

[@UBRArsenal]

Thanks for watching and the great comment. Have a great day!

[@roosterq3209]

Nice and informative

[@UBRArsenal]

I’m so glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@Emergencymedicaltactician]

My 365's lever that you turn doesnt stay down it fights against me and springs back.

[@UBRArsenal]

Hi Mason, does this happen when you have the slide off and you're trying to put the slide back on?

[@kingspartacus17x86]

Mine does this. And it with the slide on and in trying to remove it. The takedown lever keeps springing back to it's original position

[@proofer7093]

Great instructions! Very clear.

[@UBRArsenal]

I’m happy you like my video. Thanks for watching and I hope you subscribed. :)

[@bodinian]

Your video has convinced me something in mine is jammed. My disassembly level is stuck facing down, my slide isn't coming off, and I can't fit any magazines into the handle.

[@UBRArsenal]

Can you lock the slide to the rear?

[@bodinian]

@@UBRArsenal yes, I can still do that. I took it to two gunsmiths yesterday and neither could fix it. I'm going to send it to SIG for an RMA today.

[@georgiarawdon8839]

Thanks for this helpful video.

[@UBRArsenal]

You're very welcome, happy it helped. Please subscribe! Thanks!

[@j.m.youngquist419]

Great information it helped tremendously

[@UBRArsenal]

I'm glad my video helped. Thanks for watching and don't forget to subscribe. :)

[@828enigma6]

Thanks for the video. Helped considerably with my first time cleaning effort. Had it for 3 or 4 years. Amazed at the amount of dust bunnies in it. Rather concerned me if it would have run. After all, its not a 1911A1 or a well run and loved Glock 23. Question: How do you lower the internal hammer to clean under it? Thanks.

[@UBRArsenal]

I’m glad the video helped out. This pistol doesn’t have an internal hammer, it has a striker. The link below will take you to video that shows you how to remove and clean the striker if you need it. Thanks for watching and leaving a comment. Have a great day. How to Remove & Clean SIG Sauer P365 Firing Pin kzbin.info/www/bejne/d5KceHVmatGbg7s

[@lro001]

Please tell me if you have a video on the P320?!?!

[@UBRArsenal]

Youre in luck I do have one on the P320. kzbin.info/www/bejne/i2O0Z6RsfdiBgac

[@markwoodard4012]

Great video! Well done!!

[@UBRArsenal]

Hi Mark, I'm really glad you like the video. Thanks for leaving a great message and I hope you subscribed. :)

[@ufeaturemedia8273]

Perfectly explained

[@UBRArsenal]

I’m glad you liked the video. Thanks for leaving a nice comment and I hope you subscribed. :)

[@grumpy3543]

Thank you. Great slow and perfect explanation. I was having trouble getting the slide release back to the 6 o’clock position for reassembly. Thanks for that little trick. Is that normal for this gun or is there an issue that it doesn’t go back until you push the slide lock back down?

[@UBRArsenal]

I’m so glad you liked the video. It seems like the earlier p365 had this issue but newer p365 I tried didn’t have this issue. So SIG might have fixed this issue with the newer ones. Thanks for watching and leaving a comment. Have a great day. 👍🏼🤜🤛

[@Cinder_311]

Very clear amd concise

[@UBRArsenal]

I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@joshhershberger9384]

very very good video

[@UBRArsenal]

Hi Josh, I'm glad you liked the video. Thanks for watching and leaving a nice comment. Have a great day!

[@abiprates5943]

I was struggling with mine even after reading the instructions. Could you do a video on lubricanting the gun? Great video.Thank you so much. Stay safe!

[@UBRArsenal]

I’m really glad the video helped out. Ill put lubricating the gun on my list of videos to upload. Thanks for the suggestion and I hope you subscribed. :)

[@chord972]

Excellent. Thank you.

[@UBRArsenal]

I'm glad you liked the video. Thanks for leaving a great comment and I hope you subscribed. :)

[@buffussss]

good video

[@UBRArsenal]

Im glad you liked the video. Thanks for taking the time to leave a nice comment and I hope you subscribed. :)

[@kevloo6078]

Thanks!

[@UBRArsenal]

Hi Hank, you're welcome. Have a great day.

[@shrockmb]

great instructional video thanks

[@UBRArsenal]

Thanks for watching and for the great comment.

[@MGlennRoss]

Very well made video.

[@UBRArsenal]

Thanks for watching and for the nice comment.

[@bench175]

My slide lock lever won't move when I put the slide back on and try to lock it back. Any idea? Thanks

[@UBRArsenal]

It's hard for me to tell what's going on. Make sure the slide lock lever is pointing in the six o'clock position. Then try to put your slide on.

[@UBRArsenal]

I just remembered with this gun, if the slide lock lever is push in the three o'clock position without the slide on, you won't be able to get your slide on. You will need to push and hold the slide lock up and pull the slide lock lever down to the six o'clock position. Once you do that you should be able to get your slide on with no issues. Hope this helps. Let me know how you make out.

[@RockyMountainWest13]

Thank you sir. Felt like an idiot not being able to get the slide back on.

[@UBRArsenal]

Hi Rocky, you're very welcome. Im glad the video was able to help you out. Have a great day!

[@scarfacejan3]

Thank u excellent video i just subscribed👍

[@UBRArsenal]

Thanks for leaving the awesome comment! Also thanks for watching and subscribing.

[@Cheeekymonkeeey]

Yes!!! Thank you!!!

[@UBRArsenal]

I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@logan1572]

Perfect. Thanks.

[@UBRArsenal]

Hi Logan, I’m glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@keithsterling8582]

Very clear very helpful .. thanks

[@UBRArsenal]

Happy to hear my video helped. Thanks for watching and don't forget to subscribe. :)

[@deshazob]

Great video for beginners. This was not a disassembly video, it is a field strip video. You may want to consider changing the title.

[@UBRArsenal]

Hi Dashazob, I’m glad you like the video. You’re right, I’ll try to update the video title asap. Thanks for watching and leaving a comment. Have a great day.

[@Alenestates]

If you have a safety in the back make sure it is off or the takedown lever won’t stick down

[@undermoonlightglow]

Thank you. Very well done.

[@UBRArsenal]

Thanks for taking the time to leave a nice comment. Have a great day!

[@somospewriquenos]

Bravo 👏

[@UBRArsenal]

Hi Losef, I'm glad you liked the video. Thanks for watching and leaving a comment. Have a great day.

[@kylepinder6.7]

I just bought mine and the slide automatically locks without me pushing up the slide lock. Is this normal?

[@UBRArsenal]

The only way the slide should lock back without pushing the slide lock is if you have an empty mag in the pistol. If this is happening without an empty mag in it then you should contact SIG. 👍🏼 Let me know how you make out.

[@kylepinder6.7]

@@UBRArsenal lol your right empty mag, I just got my permit and don’t know anything about guns, just starting to get familiar with them, watching videos and stuff

[@UBRArsenal]

Sweet, that was an easy fix. Thanks for watching and leaving a comment. Check out the video below. These are two common issues that you might come across with the P365. Have great day. kzbin.info/www/bejne/pqiYmYOla89nfbcsi=wVMZqYSwhfNm5XmJ

[@kylepinder6.7]

@@UBRArsenal will do thank you for responding

[@narrowpathfarm]

My slide won’t lock at all when pulling back and the take take lock is in the 6 position. Very frustrating

[@UBRArsenal]

Double check to make sure your recoil spring is installed properly. Then try again.

[@narrowpathfarm]

@@UBRArsenal does it have to be rotated in a certain position? Is fitted into the half circle notch, so it’s locked in there. And when I slide it back, it doesn’t slide back all the way and the barrel only shows a portion of what it normally does. And the slide it sitting forward on the receiver…..

[@UBRArsenal]

Go to the video linked below and fast forward to the timestamp 4:44. Make sure you not having this issue. kzbin.info/www/bejne/n6uVZYmnjqqojc0

[@narrowpathfarm]

@@UBRArsenal it didn’t work, still stuck. Can’t slide the slide lock up at all when sliding the slide back. And no way to disengage the take down lever either…… at a loss

[@UBRArsenal]

To disengage the takedown lever watch that same video and go to the timestamp 5:02.

[@Greg763]

very clear video / thank you !

[@UBRArsenal]

I’m glad you liked my video. Thanks for watching and don’t forget to subscribe. :)

[@wbklink]

Great job Thanks !

[@UBRArsenal]

I'm really glad you liked the video. Thanks for watching and I hope you subscribed.

[@MnMs002]

Very Informative....

[@UBRArsenal]

Happy to hear my video helped. Don't forget to subscribe. :)

[@ghostoftheemishi8445]

Thanks bro doing a great fucking job out here .

[@UBRArsenal]

I'm glad you liked the video. Thanks for leaving a great comment and I hope you subscribed to the channel. Have a great day.

[@jermeriataylor7566]

What happens if it get stuck cocked back and won’t go forward

[@UBRArsenal]

Maybe the spring isn't in right. Is the take-down bar in the three or six o'clock position?

[@tytrue1767]

My slide lock will not push up when trying to reassemble my gun. The disassembly lever stays at 6.

[@UBRArsenal]

I tried to reproduce your issue, but couldnt get the slide lock to stick. I would disassemble everything again and see if the slide lock will function. If it does, try and reassemble again. Let me know how you make out.