How To Do A 5 Lug Conversion! Infiniti G20 5 Lug Swap Plus New Wheels & New Calipers!

[@tinman9341]

Wish I had seen this video before I did mine. I cut the race with a cut-off wheel and it took me a while because I was trying to not damage anything. Great how to!!! 👍🏼👍🏼👍🏼👍🏼

[@ERICSDIYGARAGE]

Thank you!

[@ERICSDIYGARAGE]

thank you for watching! we are almost at 20k subscribers!

[@jorgereyes3521]

I was thinking the same thing a few days ago to use the hub of an altima to make the conversion of 5 slug for my b13 I want to do conversion of calipers 300zx, good video bro this helped me a lot and now I have solved my doubts

[@ERICSDIYGARAGE]

thanks man, not a lot of info out there so I know the feeling of uncertainty lol

[@xFactoryUSA]

Motivation to do this on my B14 😊

[@DeReklameStudio]

This is a very nice how-to. I am struggeling to get my 5-lug conversion together here in Europe. What a p.i.t.a. Can You post what the part number is for the front hubs, in Europe we don't Have the i30 or i35, it would be most appriciated if I Have a partnr or somewhat.

[@abelgarza8716]

So I just got a b14 Sentra (sr20de)from A buddy of mine needing to catch up on some of your videos cause I do have quite a few questions in certain things..

[@beenova3247]

Anther great video

[@ERICSDIYGARAGE]

thank you for the support!

[@danielelamonica9411]

Hi Eric, my name is Daniele and I'm writing to you from Italy, Sicily, Palermo, I have a Nissan Primera 20.egt 150hp from the year 1991, could you tell me the value of the TPS regulator of the throttle body? Thank you

[@66lwmorgan]

Do you have any video's on replacing a rear wheel bearing on a 2000 G20? Thank you

[@ERICSDIYGARAGE]

No but this video kinda shows it

[@66lwmorgan]

@@ERICSDIYGARAGE Thank you

[@donpollo4924]

More videos from the P11 😁😗😍

[@nismomike2359]

Thanks for the video man. I been thinking about getting a p11 and doing this swap. You probably could've used the 5 lug brembo rotor from the g35 with the sport package and 350Z Touring.

[@ERICSDIYGARAGE]

how's it going man, the 350z brembo rotor will not fit these spec v brembos use a 22mm wide rotor the 350z track brembo rotor is 30mm wide and 325mm it would just not work but stay Tuned maybe I can figure a way to make them fit 😉

[@kcyung5411]

Hi, may I know what thickness of the rear hub spacers?

[@ERICSDIYGARAGE]

I'm not sure I just bought them already made

[@kcyung5411]

@@ERICSDIYGARAGE then could you tell me where you bought from?

[@ERICSDIYGARAGE]

Message him he sells the kits instagram.com/charlie28364?igsh=d212NzI1Zzh2d2lo

[@kcyung5411]

@@ERICSDIYGARAGE thanks a lot

[@more_than_meets_the_eyerog5291]

What cv joint and axels u use?

[@ERICSDIYGARAGE]

Stock

[@heitorbernardes7977]

Can you also use the 89-94 maxima front hub?

[@ERICSDIYGARAGE]

I'm not sure I would double check the number of splines so that it's compatible with the p11 axel

[@heitorbernardes7977]

@@ERICSDIYGARAGE from what I've read, the dohc has the same spline

[@hayden1426]

Hey man, what rotors and caliper set up did you use in the rear? Cheers

[@ERICSDIYGARAGE]

rear is 2000 nissan maxima rotor with caliper bracket and stock p11 caliper. it's 11in

[@DOProductionsNL]

Can't you just 'spacer' the bolt and flange of the ABS sensor itself, mounting it further inward? Changing the total wheel offset just for 1 sensor to stay aligned seems like a big step..

[@ERICSDIYGARAGE]

I was thinking about this when I was installing th kit and I think It will work as well

[@DOProductionsNL]

@@ERICSDIYGARAGE It's funny how often we automatically start to solve a problem instead of looking AT the problem.. I recently did a brake booster swap on a build and found the pushrod of the brake master cilinder to be too short to operate the new booster. Right off the bat we were like 'okay, so that rod needs lengthening'. Turned out to be a PITA, and after scratching my head for a while we flipped the problem around and backfilled the hole in the booster so the pushrod could reach. Solved.

[@ronniepurushottam6967]

Hello sir. What year is your G20?

[@ERICSDIYGARAGE]

2000

[@ronniepurushottam6967]

@ERICSDIYGARAGE I have a 99 g20 and would like to do a 5 lug conversion, can you please send me the specs to the wheel hubs so I can order my rims according to it.

[@ronniepurushottam6967]

@ERICSDIYGARAGE also a link to where you purchased the hubs from and did it come with all the washer and rings as well as dust shield?

[@ERICSDIYGARAGE]

@ronniepurushottam6967 No, it's not a kit like that it's an older car so you have to find the parts from other nissan models

[@ronniepurushottam6967]

@ERICSDIYGARAGE ebay sells hubs for Nissan maxima & infiniti I30 those hubs will fit my car

[@ceeloc4420]

If I wasn’t going 5 lug what rotors would I use to run brembos on my p11?

[@wolfieplayz8650]

Probably an ser spec v setup

[@ERICSDIYGARAGE]

You can use 2003 g35 coupe rotors 296mm you will have a 3-5mm pad over hang but they work I've used them for a while

[@ronniepurushottam6967]

Can you please send me the Contact for Mr. Charles.

[@ERICSDIYGARAGE]

instagram.com/charlie28364?igsh=d212NzI1Zzh2d2lo

[@jaybolivar3096]

How do I get in contact with you you email seems to not be working I really need help 😢

[@ERICSDIYGARAGE]

What's up how can I help