These videos are why I buy parts from partzilla. Could you please do a overheating on a vtx 1800r. Need to troubleshoot why heat icon is now on.
@rickyallenatwood46642 жыл бұрын
You are THE MAN. Thank you for the videos. Have a great day.
@Jcrause2 жыл бұрын
Best motorcycle maintenance channel.
@jeramiahgreene87717 жыл бұрын
You're vtx series videos are sooo much help, thank you! Could you post a link for this coolant?
@Muckhauler6 жыл бұрын
Would really like to see a VTX1800 fork oil change - the book looks quite technical &a intimidating
@PartzillaParts6 жыл бұрын
I'll add it to the to-do list.
@michaelcoulter7144 жыл бұрын
Really appreciate your how to videos. Thanks
@motomark97364 жыл бұрын
How often should the system be flushed ? I top off my res. at the beginning of the season I haven't ever had a problem .I generally go by the old saying if it's not broken don't fix it .
@PFCYANEZ92 Жыл бұрын
You’re the best John!
@TheUrosvasic7 жыл бұрын
You guys are the best! Keep it up.
@PartzillaParts7 жыл бұрын
Thanks, Uros! Glad you're digging what we're doing. See you around the comments!
@ChowTY426 ай бұрын
Will be changing the coolant on my vfr1200. Thank you!!!
@thedavidtuttle5 жыл бұрын
I think you should do a video on how to replace a leaking Radiator. I even have a bike you could do it on. VTX 1800F
@Galanty5 жыл бұрын
I believe the location of the coolant reservoir in a different location for the VTX 1800R and the VTX 1800S? It is behind engine low and near the rear tire.
@dwanjacquet1624 жыл бұрын
X Galanty yes it is
@RanGer-4984 жыл бұрын
As well as the 2004 Honda 1800c
@victorjohnson20932 жыл бұрын
Yes I have the R and it’s under
@parchedpixels58044 ай бұрын
The R and the S (and the C) had the coolant res down low behind the engine for the first three production years. Then it was moved up to the cylinders like the F and N.
@garyjohnson67052 ай бұрын
I have a 2003 VTX 1800R and it is different than the one used in the demonstration video.
@SinnerSince19624 ай бұрын
Why not just siphon the reservoir tank instead of all of the removal process? It seems that would be so much easier.
@DonziGT2303 жыл бұрын
If you leave the pressure cap on when you remove the drain bolt the fluid should get sucked out of the reservoir eliminating some work. In the rare case that the cap won't flow, take the cap off and put your hand or something over the hole to seal it off and it'll do the trick.
@slorts3127 жыл бұрын
John, Thank you for making these videos. You have helped me an others a great deal. I asked a question on one of your other videos and I have a similar question here. I want to change the coolant on my 2003 VTXC. My reservoir is on the bottom and not on the side like the 2005. Will the coolant amount be the same, more or less? I noticed that I have two caps for my radiator as well. one is under the tank and the other is under the left side cover. will it make a difference where i pour it in for the proper levels? Your videos you show are very clear and precise, thank you again for doing this. You are saving me a ton in labor costs with your instructional videos.
@PartzillaParts7 жыл бұрын
Fill the pressure cap first, then fill the reservoir to the line. The amount should be the same, they just put the reservoir in a different spot.
@tedhargiss10567 жыл бұрын
Would like to see a fuel pressure regulator replacement video
@PartzillaParts7 жыл бұрын
Good idea, Ted. We'll add it to the list of suggested videos. Thanks for the comment!
@GrumbleBАй бұрын
Brawndo has what bikes crave...
@darlenevazquez15367 жыл бұрын
On my VTX (with reservoir is down the chassis) once the thermostat opens it is a mess trying to keep the coolant in the system. This bike is just to difficult to work on the cooling system! That Radiator cap should have been placed somewhere other than under the tank !
@scottmckinney42916 жыл бұрын
Darlene Vazquez I was thinking about splicing in a tee with another cap on the hose going to the radiator under and in front of the tank. I’m not sure if I could find a cap housing like that or not.
@trukngal Жыл бұрын
@@scottmckinney4291did ya figure that out
@chrisc68747 жыл бұрын
not really a flush. ...more of a drain and refill. but I'm using your videos such as your top end rebuild for a 400 ex atv plus others. you guys have some of the best prices for new oem parts too. been ordering from you for years!
@PartzillaParts7 жыл бұрын
Glad to hear you're getting some use out of our 400EX ATV series. Lots of riders out there hauling around on 400EXs... it's a good one. Thanks for shopping Partzilla for your OEM parts! We are a dealer and sell our OEM parts dealer-direct (no middleman) -- helps us keep costs low! Hope to see you around the comments again, Chris.
@timothyahernRoxyCat2 жыл бұрын
Great, John, thank you!
@steveelliott5643 Жыл бұрын
You make it look so easy,you professional.They say water pumps leak a tad on these,any idea how many kms the pumps last and any tell tale signs,thinking of buying one with 23000kms on it.2002 model any good,?thanks
@InsanityHere6 жыл бұрын
I THINK THE VTX HONDA 1800 IS GOOD HARLEY REPLACEMENT.
@johnraio36885 жыл бұрын
Ray Charles yes it is !!
@tbrewska695 жыл бұрын
Certainly was for me. :-)
@warcraftwillneverdie5 жыл бұрын
i bought a Harley after owning one of these for 2 years and within a few hours was back at the dealership fighting to get my honda back.
@d.a.archer36404 жыл бұрын
@@warcraftwillneverdieHey Craig my brother bought a Road King the same time I bout my gold wing. With in 5 years he had to pull the motor apart twice for issues from that screaming eagle package.. I told him at the time you'll be sorry... He spent hours of cleaning that led to not wanting to ride cause all the work... I told him sooner or later you gotta leave the High School pressure behind and do what your brain tells you is the better bike. Im now looking at a VTX cause the wife is a x now and no need for the wind these days... Pluss I can buy two nice bikes for the price of a used Harley.
@ermanakbay4 жыл бұрын
I have a VTX and I realized how much I like my bike after renting a harley once.
@algreene65912 жыл бұрын
Good job Bro. Thanks
@rbljackson Жыл бұрын
this is an informative video, but how is it done on my 02 VTX 1800? The fuel pump is part of the tank assembly on mine, so not sure that I can run it with the tank in the up position??
@markverhoeven54964 ай бұрын
Hi i have a 2005 vtz1800R and I bought it and the oil pump/water pump was not in the bike but I do not the actual pump but no nuts or bolts. Could you please help me with the proper nuts and bolts used to repair the job? I have all the parts but I don't have any nuts bolts or gaskets and o-rings. Thanks I appreciate your time and hope to hear from you. Mark V.
@greeneyeddevil12 жыл бұрын
Awesome thanks for this really appreciate it
@waynebeseau18423 ай бұрын
How about fork spring replacement video
@nativebear13846 жыл бұрын
I appreciate these vids so much !!! I barely get help with anything pertaining to my 2004 vtx1800r. Quick question, my coolent is a little low, do i have to drain everthing to refill it?
@PartzillaParts6 жыл бұрын
No, just top it off at the reservoir.
@antonioarias1159 Жыл бұрын
Gracias por su video saludos
@victorjohnson20932 жыл бұрын
Great Video thanks 😊
@PartzillaParts2 жыл бұрын
Thanks for watching!
@patrickfontenot67322 жыл бұрын
What types of antifreeze or coolant can you use in your bike
@lanesaarloos281 Жыл бұрын
10mm sockets?
@pastorjustin41814 жыл бұрын
I have 2004 vtx 1800s. A friend removed the tank too fast for me to see what exactly he did. Gas gushed. Its been to the shop a few times. Is there room to add a shutoff valve on either direction of flow so fuel does Not gush??? 😬😷😊😎
@motomark97364 жыл бұрын
What if you over fill the res. ? Will it drain out like a car to where it needs to be or do I need to pull the res off ? I have a 2002 S and couldn't see the res tank while filling it's under the bike I over filled it
@John-2fnf2 жыл бұрын
What do you plumb the aux fuel tank into when burping the coolant?
@thomasgillette65597 жыл бұрын
hi. I recently did your test and found out that it was my solenoid. I replaced now the test tell me it's the starter. I tested the starter first and engage fine. then I figured out it was the solenoid. could the starter have went after?
@rickpearson11743 жыл бұрын
My 1800S has the fuel pump in the tank. So no running it with a hose and some gas.
@julianblhayze6 жыл бұрын
Hello mr. Tally and thank you very much for this video it was amazing I was hoping you could make a video on how to readjust a rear brake pedal that doesn't work after it was bent from falling and used a pipe to straighten it out and now the brake lights are constantly on and the brake pedal itself doesn't work.
@PartzillaParts6 жыл бұрын
Might I suggest a new brake pedal?
@julianblhayze6 жыл бұрын
Turned out it was the brake pivot shaft screw head snapped off so it was a simple inspection that led me to my answer. Thank you so much for the reply and I can't wait for you or video to clean the hypercharger on a 2002 VTX 1800 C
@roberto86726 жыл бұрын
Question Sir, just bought a 2003 vtx1800c with under 14k miles and after riding for 40min the motor was missing and the red F1 light came on, it only did it for 20 seconds or so but when I pulled over turned it off and looked for something it started up and run good. Is that a bad plug or fuel pressure and what is the red F1 light mean ??
@PartzillaParts6 жыл бұрын
Unfortunately, this could be a number of things. Loose wire, misfire, fuel injection issue...F1 is actually FI for fuel injection, but it will go off when there is an electrical issue. When you turn on the bike, does the FI light blink? That would be stored ECU codes. This might help: tech.bareasschoppers.com/resources/ecu-error-codes-vtx-1800/
@jellerolandboot9454 жыл бұрын
Hi sir. What brand sparkplug covers are those. Haven't seen it before
@thedavidtuttle7 жыл бұрын
Would like to see a spark plug replacement video.
@thedavidtuttle7 жыл бұрын
For a vtx
@PartzillaParts7 жыл бұрын
Added it to the suggestion list, David! We'll likely start recording spark plug videos regularly and we may just get the VTX back on the lift.
@josekim017 жыл бұрын
You can check how they do it in other bikes and you'll figure it out.
@thedavidtuttle7 жыл бұрын
wow great comment, very helpful
@jrrican57705 жыл бұрын
kzbin.info/www/bejne/p4nYoJ6piph0q68
@valhenry19474 жыл бұрын
Can I use 85w-140 final drive trail oil in my vtx1300?
@orodriguez182 жыл бұрын
Maestro xf limpieza de inyección de vtx1800
@garyjohnson67052 ай бұрын
What year and model of the VTX 1800 is used in this demonstration video?
@PartzillaParts2 ай бұрын
This is an '05.
@christianroman5303 жыл бұрын
Lol my 2002 1800 does not have the drain line on bottom rear of tank
@greeneyechristie Жыл бұрын
I did everything to the tee. Now my bike running hot a leaking fluid
@NEdownhill2 жыл бұрын
Do you see any issues with reassembling the bike and running it, then topping off as needed after the coolant flush? I would love to avoid having to purchase the AUX fuel tank and running the bike semi-disassembled
@HYP3Rab2 жыл бұрын
You cant get to the coolant cap, with the tank on
@parchedpixels58044 ай бұрын
I get to the coolant cap with the tank on just by removing the rear tank mount bolt and nut and propping up the rear of the tank with a 12” length of 3/4” pvc-notched at top to accept the tank and a hole drilled through the bottom to reinstall the tank bolt through the pvc to secure it in place. I remove the dash bezel from the tank prior to all this and hang it to the side. Helps to have minimal fuel in tank. And a 3’ clear 1/2” hose attached to a funnel can top off the coolant.
@fenno47352 жыл бұрын
"Extremely toxic" as my auto shop teacher tells everyone to dip in their pinky finger and taste it.
@suntzuwarsword19644 жыл бұрын
excellent video....thank you sir
@ulissesmoutinhousa46405 жыл бұрын
I have a VTX just like the one in the video and on panel everything works but the velocimetor do you know what i can do i bought it like that do you think the cable is disconnected
@PartzillaParts5 жыл бұрын
Cable or sensor.
@warcraftwillneverdie5 жыл бұрын
does the disassembly vary greatly between this 2005 model and a 2003 model 1800c?
@PartzillaParts5 жыл бұрын
Some differences, but same concept. Shouldn't be too difficult.
@d.a.archer36404 жыл бұрын
I could use some help on a 06 VTX1800 Waterpump change... Just letting me know were its at would help lol
@PartzillaParts4 жыл бұрын
Left side of the motor, connected to the radiator hose.
@claudesmoot18806 жыл бұрын
Is the, (Crush Washer) reusable or do you need to get a new one?
@PartzillaParts6 жыл бұрын
Crush washers are usually one time use.
@joannkidwell65807 жыл бұрын
I have a vtx1300 hose busted on coolant system fix it ,done just like the video showed drove down the street an it stop running , but i can start it an it will sitt there an idel fine but when you put it in gear it shut off let me no what to do to fix this problem
@PartzillaParts7 жыл бұрын
I don't see how the two are related. Check your kickstand switch.
@Steven-bp8jn Жыл бұрын
I got mine changed now it giggles every time I shut it off now
@Steven-bp8jn Жыл бұрын
Gurgle
@walmerpereira46044 жыл бұрын
how can i replace or Remove the thermostat from my motorcycle honda 1800 vtx year 2002??
@wadesmith94834 жыл бұрын
Get a manual or watch a video on it then tear into it. Hardest part is getting started. Leave your doubt behind and be meticulous
@uctrilam3197 жыл бұрын
Could I refill directly from the rubber hose near by the horn and how many liter is enough for 1300? I do not have enough tool to remove tank, seats....please advise.
@PartzillaParts7 жыл бұрын
It's not recommended. You won't be able to get the proper amount of fluid in the bike. The VTX1300 takes 2.9 qts or about 2.75 liters of coolant.
@uctrilam3197 жыл бұрын
Hi mate, I have a problem afte rchanged fluid: the engine is hot, checked with thermo and the temperature is 104C, the fan worked but when I rode on the street, the engine is stopped autotimacally, without any reason.....I waited for 3minutes, re-start and the bike worked again, I came to the garage but no one could find the reason. They recommended me need to clean the radiator tank and change the sensor (at the bottom of radiator tank) to reduce temperature down, approx to 80C for starting the fan.....at the moment, I connect the fan directly to the power source, ie when I turn on engine, the fan will be working, no need to wait for reflect from the sensor My questions are what reason do you think is should be and what is the best solution for this? Thanks for your advise very much.
@PartzillaParts7 жыл бұрын
Without looking at the bike, it's hard to tell. It could be an overheating issue or an entirely new problem. Make sure your coolant levels are correct, then check your electrical system.
@uctrilam3197 жыл бұрын
Okay, thanks man, I'll do this.....ah, should I install the external oil cooler to reduce the temperature? please advise.
@PartzillaParts7 жыл бұрын
Do you really need it? 104C is not a crazy temperature, if you were constantly hitting 120C or so, then yes. The bike should function fine without adding the oil cooler. If it's not, something is wrong. If you are riding in extremely hot climates, like the desert, then the added cooling might be beneficial.
@mann19337 жыл бұрын
Honda vtx 1800s. what do I do? How to replace the coolant in such a situation? How to remove expansion tank?
@PartzillaParts7 жыл бұрын
Should be in the same place. I may have missed an earlier post, what situation are you referring to?
@mann19337 жыл бұрын
Partzilla Hello, friend! My motorcycle Honda vtx 1800s 2003 expansion tank is near the oil filter near the rear wheel at the bottom. How to replace the coolant? Should I remove the expansion tank?
@PartzillaParts7 жыл бұрын
If you were doing a complete fluid change, you can either remove it and dump it out or just use a suction device to pull the fluid.
@pwmabry16 жыл бұрын
How often do you change the Coolant?
@PartzillaParts6 жыл бұрын
Honda recommends every 8000 Miles.
@pwmabry1004 жыл бұрын
@@PartzillaParts I'm at 30K and it running fine. Will this cause a problem?
@SaulVTXFRIDER4 жыл бұрын
Honda just wants to make money...once u flush ur coolant with new coolant u should b good for the next 5 years or more
@southside19753 жыл бұрын
should of left the cap on slow the draining IMO few rags also I would never want my bike treated like that
@chromevanadium58253 жыл бұрын
Spilled all the liquids all over the bike, left gas stains on side covers, pur the gas tank directly on the ground... Well, I would never give my bike ton such service!