How To Do A Led Upgrade On Gm, Chevy Steering Wheel Controls.

Get Your Led's Here carradiobulbs....
We can do them for you here carradiobulbs....
================================
BELOW IS A LINK TO ALL OF THE PRODUCTS THAT I USE IN THE VIDEO.
Isopropyl Alcohol 99%
amzn.to/37XBA7j
Solder Wick
amzn.to/3wypBp7
Kester Solder
amzn.to/3wrE73h
100 pcs Foam Tip Cleaning Swabs
amzn.to/3PuFuFz
Chipquik Tack Flux/solder paste
amzn.to/3wqcpnr
100 pcs 2.75" Small Head Foam Tip Cleaning Swab Lint Free
amzn.to/3sKnBsC
Stickvise PCB Vise with Standard Nylon Jaws
amzn.to/3a331gF
DC Power Supply Adjustable (30V 10A)
amzn.to/380uQFS
HAKKO desoldering iron
amzn.to/3My1m11
Hakko FX888D-23BY Digital Soldering Station
amzn.to/37Wr3cu
Anti Static Insulation Silicone Soldering Mat Heat Resistant
amzn.to/3PHeL9d
Adjustable Circuit Board Holder
amzn.to/3Mxj8By

[@keenanrtillman4234]

your videos are a big help and very directional I appreciate you doing what your doing man.

[@cruxinterfaces]

Very informative and well done, if you want to see other great 12 volt videos Thank you for the content

[@wildeone5410]

very well explained. great job!

[@sacker420able]

What wires did you hookup to the power to get positive and negative?

[@eduardoluna4002]

great job, your video help me a lot

[@ChrisBrown-jt7dg]

just ordered the kit, looked all over your site to see if them come with instructions didnt find anything saying they do I hope it comes with picture tutorial instructions

[@Car-Radio-Bulbs]

Instructions on how to install them will be emailed to you when the item ships.

[@ChrisBrown-jt7dg]

@@Car-Radio-Bulbs Awesome Thax for the quick reply 👌 Now that's customer service

[@rafaelrosas2918]

Eaht wire did u connect for +and- to test it

[@wild8757]

Instead of using a Ohm meter to test for the positive contact couldn’t you just touch one of your new LED bulbs to the contacts to see which one lights it up?

[@kenworthcustomlogisticstru8096]

What are your hours that you are open

[@kenworthcustomlogisticstru8096]

Will blue LED square light for the steering wheel control light replacement.

[@Car-Radio-Bulbs]

?????

[@totopink1]

I need the led # please thank you 😊

[@Car-Radio-Bulbs]

Here is a link to the led's carradiobulbs.com/store-4/chevy-and-gmc-steering-wheel-control-led-bulbs-set-of-8-1/

[@caseyharris9365]

How many volts are the leds i have 12v leds left over from cluster work can I use them ???

[@Car-Radio-Bulbs]

They are 12 volt but they need to be 3mm to fit in the switch.

[@namename6645]

Is there a option to send mine in and have you replace them?

[@Car-Radio-Bulbs]

Yes there is here is a link to that service carradiobulbs.com/store-4/chevy-and-gmc-steering-wheel-control-led-upgrade-service/

[@avenged06x]

External website link for the LED's that you use?

[@Car-Radio-Bulbs]

carradiobulbs.com

[@southsidetv773]

What do you use for your 12v source to test the LEDs and switches???

[@Car-Radio-Bulbs]

This is what I use. DC Power Supply Adjustable (30V 10A) amzn.to/380uQFS

[@southsidetv773]

@@Car-Radio-Bulbs Thanks a million for the fast reply and the link to the power supply. I just bought a 12volt battery but I didn't like it and it sparked once hooking something to it. I can use this for a numerous of 12v applications correct? I'm mainly looking to use it for changing all my switches in my suburban like you have posted a few videos of you changing the LEDs. I've watched all your vids so thanks alot for the help. I might be reaching out to for some help lol.

[@Car-Radio-Bulbs]

@Southside TV You can use it for all kinds of things it will work from 0 to 30 volts which is great when working on GM vehicles because depending on the car they use lighting from 3.5 volts up to 12 and 14 volts.

[@southsidetv773]

@@Car-Radio-Bulbs Thanks so much for that link. I purchased it the same day you sent it. Can't wait to get to try it out. I was looking for a 12v source for my test bench and this has hit the nail SQUARE on the head. Do you do side work? Like if I sent all the parts I wanted to be changed out to different color LEDs would you be open to that?

[@Car-Radio-Bulbs]

@@southsidetv773 Yes I do this for a living and here is a link to all of my upgrade services....carradiobulbs.com/store-4/led-upgrade-service/

[@claudecomeault1528]

Which wires and color are you connecting your power supply to?

[@Car-Radio-Bulbs]

The Brown and Black The Black is the ground.

[@claudecomeault1528]

@@Car-Radio-Bulbs Thanks so much. Love watching your videos.

[@Car-Radio-Bulbs]

@@claudecomeault1528 Your welcome. Glad I could help.

[@bearablepain592]

I just installed mine in green and they are great, however the lower right button is driving me crazy. I cannot get it to go together and have the power plug light the buttons. They do light when I test them with a tester, so the polarity is right and the solder connection is good. Something seems to be reversed but I cannot figure out what is wrong. The other 3 buttons went in fine and look great. The lower LED lights seem to be bigger and protrude more than the stock bulbs but the left one works, just a tight fit inside the unit . The lower right side is a different story. The 4 prongs do not sit properly in the case so when you try to put on the cap they become misaligned and don't go through the hole. If I flip the board around they fit perfectly and the cap goes on perfectly but then the plug does not illuminate the buttons, but the vehicle controls work! They just aren't lit. It's maddening. I watched a few other people comment in their videos that the lower right gave them more problems than the other three.

[@kenworthcustomlogisticstru8096]

Just wondering where are y'all located

[@Car-Radio-Bulbs]

Dayton Ohio.

[@daleleis5563]

Where can we buy these blue LED lights, can you buy the switches with the blue lights already installed

[@keithwatson4707]

Where?

[@Car-Radio-Bulbs]

You can get the led's here carradiobulbs.com/products/chevy-and-gmc-steering-wheel-control-led-bulbs-set-of-8-1/

[@daleleis5563]

audioxpress 1 : thanks for the reply, I’ll check it out

[@cltholen]

Are the LEDs that you installed the "white" or "blue" ones??

[@Car-Radio-Bulbs]

They are the Blue Led's as stated in the video at the end but we have them in 4 different colors Red, Blue, Green and White,

[@juanvillanueva9399]

buddha91 are those are 5 mm to

[@davidneill9877]

@@Car-Radio-Bulbs i have to a bunch of these for my son. May I email you? If so what address? Thanks

[@tonydeleon6059]

Are the negative and positive the same on all the switches?

[@Davidriveraz71]

Are these 3mm or 5mm

[@Car-Radio-Bulbs]

3mm

[@johnhalchishick7094]

Mine on my 2005 Denali don't light up at all none of them

[@Car-Radio-Bulbs]

Have you replaced all of the light bulbs?

[@johnoakley9027]

Check your fuses before tearing it apart

[@caseynail8439]

do you know the pinout or were i can find it for the harness i have an extra

[@rafaelrosas2918]

Dis u findout the pinout on the harness i just installed this steering wheel on my truck and i want to light it up

[@caseynail8439]

@@rafaelrosas2918 not yet im pretty i did it right just haven't had time to Bench test

[@rafaelrosas2918]

@@caseynail8439 thanks i have seen other videos and the brown with white wire it seems to be the power

[@caseynail8439]

@@rafaelrosas2918 ill go check alldata i went and ordered the subscription so i have everything ever needed for my year