How to do a quality cut with the new KIT TC-125

[@kelsang4804]

​ @Rubi Tools I have bought this machine 2 months ago, and the supplied blade is terrible, can you recommend a suitable blade for chip free cutting of full bodied porcelain with this machine. also I have had to add my own draught excluder strips to several parts of the base to ensure adequate dust extraction when dry cutting. it seems as though some simple additions could have been incorporated which have been left out for the sake of saving expenses. All in all I have spent a lot of money on what I feel so far is not a very good machine for what is is advertised for.

[@RUBITools]

We would recommend the TCR or CPC blade for cutting porcelain. The TCR will cut through it faster, in case you have many cuts to do.

[@simpolosolutions3085]

We have a tile product that is 20mm thick (NEOTRA STONES) and made of hard porcelain. We want to perform miter / 45 degree cuts. Please let us know what machine & blade would be suitable for these cuts.

[@RUBITools]

Hello! There are many cutters and blades that would be fine for the project you have to do. If you give us your email address and tell us the city and country that you are writing us from we can have a commercial representative contact you. They'll be able to take more specific information about your project and make a more specific recommendation.

[@renanvale9194]

Ola estar disponivel no brasil essa marquina.

[@RUBITools]

Hola. Aquí tienes la información de contacto de nuestro distribuidor en Brasil. moldimplas.com.br Tel:[phone] [e-mail]

[@milkybaravenger]

What blade would you recommend for wet cutting mitres in 10mm porcelain on the tc125? I’m in the U.K.

[@RUBITools]

We offer many blades that can wet cut 10mm porcelain. All the red blades you see at the link below are specifically designed for cutting porcelain and you can use any one of them with the TC-125 as long as you get it in 125mm or 115mm diameter. www.rubi.com/en/wet-cutting-diamond-blades-f17

[@milkybaravenger]

@@RUBITools that would be grate but according to the web link you sent me the smallest any of those red blades come is 180mm. do you make a wet mitre blade to fit the tc 125?

[@RUBITools]

For the specific purpose you're looking for we'd actually recommend the TVR www.rubi.com/en/hard-material-diamond-disc-turbo-viper-tvr-r778 You'll see that it's not red, but it's just as capable of cutting porcelain and even harder materials. You'll also see that it's designed for dry cutting, but it's always a good idea to wet cut even when you're using dry cutting blades. Regardless of whether or not the blade is capable of dry cutting, using water to cool it down as you cut is always a good idea. The same is true for diamond drill bits.

[@stefanoricci6714]

Hi which is the reletion between cutting time and material thickness? In other words if I have a 6 mm porcelain tiles which is the rate? thanks

[@RUBITools]

It depends on the blade that you use. But if you are using a blade adequate for cutting porcelain, you should be able to cut through 6mm pretty quickly.

[@niche.quiche]

that first cut was really rough! does this not achieve a smooth edge finish?

[@RUBITools]

Hello. We tested this cutter many times with different materials and blades, and we can assure you that with proper use it leaves an impecable finish.

[@jermainecampbell7473]

What’s the length of those tracks the saw glides on

[@RUBITools]

Eeach track is 111cm. But you can put together as many tracks as you want so the cutting length is limitless.

[@yotuelnoustellos3354]

Ese equipo está disponible en México? Cuanto cuesta?

[@RUBITools]

Hola Samuel, este equipo estará disponible a finales de año. Saludos

[@martinteobaldofloresquijo2803]

Señores de RUBI, la máquina es interesante, yo me dedico a cortar y hacer zócalos , estoy interesado en esta máquina dónde puedo adquirir y cuánto cuesta, quisiera información, soy de Perú- Puno

[@RUBITools]

Hola Martin. En Perú puedes contactar con nuestros distribuidores : - Sodimac - Maestro - Promart - Hipermercado Cerámico Con ellos puedes comprobar disponibilidad de productos y precios. Saludos cordiales.

[@sabinsasi9664]

@@RUBITools = Hi

[@ivansokolikov338]

Диск стоит не параллельно направляющим шинам! Почему нет регулировки положения площадки, относительно диска?

[@RUBITools]

Привет. Если ваш диск не выровнен, это будет означать, что вам нужна послепродажная помощь. В каком городе и стране вы живете?

[@davidmanjarres564]

Precio para emiratos y donde puedo comprar

[@RUBITools]

Hola. Puedes contactar a Nadeem Khan, él te podrá informar acerca de precios y disponibilidad en tu país. Su correo electrónico es [e-mail]

[@MariogillermoOrtizguailla]

Precio porfavor

[@RUBITools]

Hola. Aquí tienes la información de contacto de nuestro distribuidor en Ecuador. Centros Graiman: KiWy y Ferrisariato. Tel. [phone] Andres Tel. [phone] Moises www.graiman.com

[@patutberg9349]

Kan gewoon met een snijplank verstek wel netjes 👍

[@sabinsasi9664]

How much

[@RUBITools]

What city and country are you writing us from?

[@wasimakram8046]

What the price and how can we get this?

[@RUBITools]

Hi Wasim, where are you located?

[@doczenith5491]

That was such a rough cut. I’m sorry but you gota do something about this unit. There is no way it should be such a beat up mitre or 90 degree cut. It looks like crap in your demo vid and all the review pics so why would I buy one?

[@RUBITools]

Well, remember that the quality of the cut depends a lot on the blade you use, the materials you're cutting, your technique, etc. Also, this video is a few years old. Since 2019 we've made some pretty big improvements on this machine. All that said, you're right, this cut doesn't look great.

[@1979phill]

@@RUBITools i have just ordered one of these machines for some large format 120x260 porcelain. but after watching this video and seeing how rough the cut looks. i am wondering if i've made the right decision.

[@ivansokolikov338]

@@1979phill нет😂

[@danielchallenger7977]

I know this video is mega old now but it's the supplied blade that gives the terrible cuts. The machine itself is excellent (I've just purchased one) but it really needs a Ridgid brand blade in it (can't remember which one but it was very thin).