How to do a Woodgrain Rolling Tray

[@themancaveofstyle2789]

This is a great idea I usually use woodgrain shelf sticker paper but this is even better

[@Tookie2Solid]

Yes I love making them this way! I’m glad you found the video useful. ❤️

[@terriwilliams5312]

Nice job! For my wood grains I use a dry paint brush to give it that “wood” look

[@Tookie2Solid]

Terri Williams thanks for watching, I’m going to try that out and see how it comes out for me.

[@ms.d6857]

Very nice! To help with part A being so thick I soak mine in hot tap water for about 10 minutes it loosen it up to be like part B. And instead of pouring the way you are B into A just use a measuring spoon 1 tablespoon is what I use, it alway come out the same measurements and you will use less comes.

[@Tookie2Solid]

Thank you so much for the advice I’m always willing to learn something new

[@BigGuyCustoms]

Use Rustoleum candy apple red and your tray will come out cherry wood.

[@Tookie2Solid]

Big Guy Customs OMG I never thought about doing that, I am definitely going to try that out! I’m getting excited just thinking on how it’s going to look lol Thank you for the tip 🙌🏽

[@hectortobias8840]

@Sutton Kellan yea, been using Flixzone} for years myself =)

[@flawlesshoney]

Do you use the red after the brown?

[@kyraj6539]

See now this go be my first tray I try, you did that💪🔥

[@Tookie2Solid]

kyra j thanks sis, yes girl go for it! ❤️

[@crystalsimmons2560]

Hi great job may I ask what color was next after the Latte?

[@lisacapers2181]

This is a bad-ass tray. Beautiful elegant love the colors. Pls list what you used to make this. Thanks Lisa 😊

[@skeinofthings]

I wish I could show you a pic lol. I thought I had it going on but al of a sudden and only on the left side the white paint came up and it looked like the edges were rusted out. Not sure how that happened and the tray sat for 48 hours before using the alcohol inks. Not sure what I did wrong but 90% of the tray looks amazing!

[@karinac.2017]

I love this so much, I’m trying to do this I just ordered the inks but can’t find the teakwood one 🥺

[@Tookie2Solid]

Thank you ❤️ try Amazon or eBay if you haven’t already

[@merrietts]

Michael’s also has it.

[@Tookie2Solid]

Oh yeah I’ve gotten it from there too not sure about hobby lobby or Walmart but Karina I’d try them both if all else fells

[@keonextortion4285]

So would I add the image and then do another layer of eproxy or would I do the image before the eproxy

[@seneitrajones1074]

Do you mind sharing the type of vinyl you used in this video? This is very nice. Also After you applied the vinyl did you spray anything over it?

[@TriparA0323]

@seneitrajones If she didn't use a spray she might of applied resin

[@Tookie2Solid]

I use cricut removable vinyl or premium vinyl and then I added resin on top.

[@fancylady9280]

Amazing keep it coming love watching these kind of videos you have a new subscriber 👌🏼👌🏼🙌🏼💕

[@Tookie2Solid]

Fancy Lady I’m glad you enjoyed the video. Thanks for watching and subscribing 😊 ❤️

[@bobbijobutler2880]

🔥🔥🔥🔥🔥😍😍😍😍 just LOVE LOVE LOVE THIS TRAY! TFS

[@Tookie2Solid]

Jo Jo Jordan Thank you so much I’m happy you enjoyed the video 😊

[@lawandaguillory1549]

Awesome job...where do you purchase the trays? What is the measurements on the epoxy?

[@Tookie2Solid]

Thank you! The trays can be purchased from dollar tree. To be honest I never use exact measurements on the epoxy I just eyeball it

[@PamelaLoper]

Hey boo where do I get the different paints at. I didn't see it in description

[@cicelywade1115]

I absolutely love this I cant wait to try this awesome job ❤

[@Tookie2Solid]

Cicely Wade thank you 😊 I’m glad you enjoyed it! I’m sure once you try it you’ll find yourself bringing chips to parties all the time 😂 🎉

[@cicelywade1115]

@@Tookie2Solid I'm definitely going to try it you gave the perfect idea for father's day I cant wait to see how it turns out. How'd you get the exact Hennessey label I want mine to look just like yours it's perfect ❤

[@natashafisher2788]

Put resin into a warm water bath for may like 5 minutes and it won't be so thick when you go to use it. It works for me that way. Just My Opinion.

[@Tookie2Solid]

Natasha Fisher thank you so much for the tip, I will give it a try

[@natashafisher2788]

@@Tookie2Solid your welcome

[@MegaGrownFolks]

Nice

[@farrahbarnes7715]

I’m trying to design my own tray. What are the main materials needed ? Tray Resin Letters/print ? What transfer paper you use? Do I need a printer ?

[@Tookie2Solid]

Farrah Barnes yes... tray, ink, resin, spray paint, vinyl (or whatever material you choose for image) There’s different ways you can add images to the tray you don’t always need a printer. I used an image that was made from removable vinyl and I cut it with my cricut maker.

[@annsheee2392]

Awesome job. I hit the big bell, I’ll be back

[@Tookie2Solid]

AnnSheee thank you I’m glad you liked it! 😊

[@trayjones84]

Hi do you have the link for the alcohol links and is the tray a metal one before you painted it nice video

[@evelynsavage6067]

Very nice...Thank you

[@ShawneesJourney07]

I like your technique with with different color ink. Just a suggestion.... a small. Uneven cut paintbrush would give you a better wood grain appearance.

[@Tookie2Solid]

Awesome, thank you! I appreciate the tip I will definitely give it a try and thank you so much for watching

[@ShawneesJourney07]

@@Tookie2Solid absolutely. My husband said its called a "chip brush" he got it from home depot. Cheap. I think $0.60

[@samanthafonzi5074]

Do you spray paint.the back of the tray or leave it silver?

[@cilla4000]

Good question

[@cheyennejanae5315]

She answered yes to someone with the same question

[@Tookie2Solid]

It’s really up to you if you want to spray the back me myself I usually do.

[@AuntieAriiii]

I love this

[@Tookie2Solid]

Thank you!

[@youaskedforit9465]

Love it ❤️ Ty for sharing ❤️

[@Tookie2Solid]

Alisha R Thank you! I’m glad you enjoyed the video 💕

[@jewelspencer609]

DOPE!!! LOVE IT

[@Tookie2Solid]

Thank you so much!!

[@zenaidapadilla2805]

I like this🙂.

[@Tookie2Solid]

Thank you!

[@trueboonebeauties]

Killed it

[@Tookie2Solid]

Thank you!! ♥️

[@JipsySoul69]

Where are you getting your trays?? Dollar Tree around me don't carry them anymore & I couldn't find them online.

[@Tookie2Solid]

You should be able to find them on dollar trees website. You can order them by the case.

[@tracyhowell8170]

Than you so much for sharing ❤️

[@Tookie2Solid]

Thank you for checking out my video!

[@marilynbradley8487]

Where can I purchase these colors individually without buying the whole set.

[@Tookie2Solid]

I haven’t found them separately. The only one I’ve found individually was the teakwood.

[@TIMEWITHLADYESHA]

Very nice I love this. AWESOME JOB ❤❤

[@Tookie2Solid]

TIME WITH LADY ESHA thank you for checking out the video I’m glad you enjoyed it! ❤️

[@tamikka09]

Love it

[@Tookie2Solid]

Thank you!

[@sadevantrease8963]

How long did you let the spray paint dry before adding the ink?

[@Tookie2Solid]

I let it dry for 24 hours then applied the ink

[@latonyathomas755]

I did my try try with the brown. But when I put the epoxy it turned it a yellowish color. I don't understand why

[@kenyaclark6177]

Love this..but how did u get the symbol cut with all the details??

[@kerteeveeyuh]

Use a cutting machine

[@Tookie2Solid]

I used a cricut cutter. It’s a cutting machine.

[@roshawnda97]

Gorgeous

[@Tookie2Solid]

roshawnda heyward thank you! 😊

[@terrisylvester3151]

will white primer paint work also

[@Tookie2Solid]

Honestly I’m not sure I have never tried that. If you try it could you let me know how it works out for you?

[@MsLolaBunny40]

Beautiful Tray! What size did you use for the Hennessy word?

[@Tookie2Solid]

7.98 x 4.37

[@brownkeyatakb]

Can you use teakwood on tumblers?

[@Tookie2Solid]

Yes you can

[@ChristinaVfjv82]

Nice! Are the bottoms of the trays done also?

[@Tookie2Solid]

Thank you! Yes, I did the back also.

[@chiloveradiouncut]

Where did you get your tray? Do you have a link?

[@Tookie2Solid]

Goddess Love I purchase the trays from dollar tree

[@TashaFierce111]

Cute! Do those alcohol inks come in a set?

[@Tookie2Solid]

Thank you! Yes they do the teakwood I purchased separately.

[@shara2536]

Can the label be added before the epoxy or would it not turn out right?

[@Tookie2Solid]

Shara Ervin I always add the label then the epoxy then add epoxy on top of the label when using this kind of label because of the way the label is added it could remove some of the ink from the tray.

[@shara2536]

@@Tookie2Solid ok thanks!

[@Tookie2Solid]

Shara Ervin no problem

[@meyuannapayne5717]

How were you able to cut the logo in vinyl? I'm trying but my circuit prompts me to print it on plain white paper

[@Tookie2Solid]

Hmm I’m not sure why that is. On the cricut maker I just choose vinyl and it works fine.

[@crystaljackson8346]

Hey I know I’m late and you probably already figured this out but in regards to your question here, are you making sure when you upload an image and remove the background, you’re saving it as a cut image? If not be sure to save as cut not print then cut. Hope this helps! Let me know if it doesn’t I’ll explain in better detail

[@4darangel]

how long does ink have to dry before epoxy

[@Tookie2Solid]

Only a few minutes. By the time I mix the epoxy the ink is already dry.

[@MsNana1119]

Once you added the labels did you epoxy again?

[@Tookie2Solid]

MsNana1119 yes I did

[@MsNana1119]

@@Tookie2Solid thank you

[@uncbroyoda4077]

Where did you purchase the tray?

[@Tookie2Solid]

BRO YODA I purchased the tray from Dollar tree

[@bossdoutstylez920]

Wow that's amazing. Are you selling these??

[@Tookie2Solid]

Bossd Out Stylez Thank you I’m glad you like it! Yes I sell them but I really enjoy making them as I do almost everything 😂 Thanks for watching ❤️

[@84SandHill]

🔥🔥🔥

[@ivorybrown4811]

I Love This Design 💕 I'm Curious To Know What Type Of Paper You Used For The Word/Design ?

[@Tookie2Solid]

Ivory Brown I used removable vinyl (cricut brand)

[@msaries314]

1KlumsyKrafter so you put the vinyl on top of the resin & left as is? Or did you add some more resin to cover the vinyl?

[@brianacollier3159]

@@msaries314... I have the same question 🤔

[@desireapruitt969]

@@brianacollier3159 I'm more than sure he added epoxy on top or else it will get ruined.

[@ivorybrown4811]

K. M. J i put the resin on top of the vinyl

[@keyoshiaburnett733]

Where did you get your trays ?

[@Tookie2Solid]

Dollar tree

[@iamsbonamy]

Where do you get the ink from ?

[@Tookie2Solid]

I purchased the ink from Amazon

[@iamsbonamy]

1KlumsyKrafter thank you

[@phenaturallytee]

Whats the brand of ink you used and did you expoxy again after the lable to protect it?

[@marissajara4291]

Can you do a tutorial on how you do the letters

[@Tookie2Solid]

Hey Marissa I just uploaded a video on how to make and add the letters if you wanna check it out

[@bitesize8884]

What did you use for the wood coloring ?

[@MyScentedMoments]

Alcohol ink

[@Tookie2Solid]

I used alcohol ink

[@sadevantrease8963]

Also do you remember what font was used for the words?

[@Tookie2Solid]

I just googled the Hennessy logo and cut it out with my cutter

[@tamarakennie6126]

Did you epoxy over the label?

[@Tookie2Solid]

Tamara Kennie yes I did

[@chokolatekittee]

May I ask what font did you use for the letters?

[@Tookie2Solid]

Ms Jones I just googled the Hennessy logo and cut it out with my cutter

[@bigdawgs1799]

I was wondering where you got the tray from...

[@spope33]

Dollar tree

[@bigdawgs1799]

S Pope thank you do much!

[@Mochiboba90]

Could you have put the label on first then epoxy it? Just want to save a step breathing in those fumes lol

[@Tookie2Solid]

Dayna J yes you can add the design before you epoxy it I do that with other designs but the way I added this particular design would have removed some of the ink so for these kind I don’t. Also, I never smell the resin at all but maybe it’s just me.

[@MyScentedMoments]

Wear a mask and open your windows

[@mrsfav660]

👍🏾

[@Tookie2Solid]

Thanks for watching

[@quinetteherrington5266]

What size tray is this?

[@Tookie2Solid]

7.625x11in

[@BeingAngelaMonique]

Usually how many trays can you cover with one epoxy kit?

[@Tookie2Solid]

Angie Bee honestly I don’t know but if I had to guess I’d say anywhere from 5-10

[@lionelstokes3869]

WHERE DO I BUY THE TRAYS I WANT TO TRY ? SUBBED GREAT WORK

[@Tookie2Solid]

I’m glad you enjoyed the video! 😊 You can find the trays at dollar tree.

[@lionelstokes3869]

@@Tookie2Solid thanks alot appreciate it

[@Tookie2Solid]

lionel stokes np ❤️

[@cheyennemartinezz]

How much epoxy did you use?

[@Tookie2Solid]

Cheyenne Martinez honestly I never measure I just make sure it’s the same amount of part a and b and I start with a little then add more as needed

[@samanthacrudup5152]

How did you put the words on it

[@Tookie2Solid]

Samantha Crudup I will be doing a video on how to add the letters soon.

[@manesecrets]

what size is this tray?

[@Tookie2Solid]

The trays are 7.625 x 11-in.

[@queenc4655]

Hello , can this stuff be used on a plastic serving Trey if spray painted

[@ms.d6857]

Epoxy is not good with plastic. Unless it's decorations.

[@1MzGP]

Where to purchse?

[@Tookie2Solid]

You can find the trays at dollar tree

[@1MzGP]

@@Tookie2Solid I was meaning after you have decorated it lol

[@ttmoore20]

You didn’t show how u added the Hennessy on. ☹️☹️☹️

[@scorpioqueen5903]

Just get the clear sticky paper that’s use for printing. Of course you’ll look for the design or images you want to use, then once you find those you’ll print them out on using the Sticker paper. After that you’ll cut them out and peel the label off in place it on your tray. Hope this helps my love. My advice before you add the epoxy mixer Put the sticker on first! Then put the epoxy on top because it keeps the sticker from peeling later on down the line also you can spray paint your trays as well! It’s up to you how you’ll want to proceed. You can Also use glossy spray paint for the shine as well.

[@Tookie2Solid]

I will be doing a video on how I added the decal sometime next week. Sorry, I didn’t include that I was trying to make the video as short as possible.

[@Tookie2Solid]

ttmoore20 I have uploaded a video to my channel on how I added the Hennessy label to the tray if you want to check it out.

[@reyanwarren4323]

my ocd was on high alert because you kept missing the left side of the tray 🤦🏽‍♀️

[@Tookie2Solid]

My bad, I was trying to make it a short video

[@reyanwarren4323]

1KlumsyKrafter you’re good girl. loved it nonetheless. i am just an ocd crackhead lol

[@jordanc3430]

Fireee😍

[@shantaymadison3808]

I made it with Woodprix plans!

[@lina19988]

Where do you get the trays ?

[@Tookie2Solid]

I purchased the trays from dollar tree.