Next time my friend needs his oil changed on his truck...he can pay me the $100.00 he would give to the dealer or one of those ripoff oil change shops. Thanks for doing the video. Great job.
@russelljones71313 жыл бұрын
Best if the oil is a little warm before draining. Did your Drain plug have a gasket or crush washer? What are the torque specifications for the drain plug when reinstalling?
@alessandroabianni4199 Жыл бұрын
Thanks for the video. It was straight and to the point. Thank you again.
@jerrylowder91002 жыл бұрын
I leave filter and plug out till it's completely drained than put filback on
@jamesmckeachie6149 Жыл бұрын
Oil should be hot so any particles are suspended in the oil and drain out rather than stay in the bottom of the pan. Sometimes a little more oil will come out once you remove the filter so I would leave the plug out until it is completely drained. Also most new vehicles have a crush washer that shouldn’t be reused and needs to be replaced on the oil plug.
@nomanslandbeast6812 жыл бұрын
muy bien explicado muchas gracias
@onlycraycray-baby7436 ай бұрын
💯
@amandalopez70804 жыл бұрын
Good job ❤
@Sashaaltac6272 жыл бұрын
Thank you for save me $ and time 😃
@andreivasseka276811 ай бұрын
Worm up engine just at mid temp then drain it !!!
@oscarpadilla3752 Жыл бұрын
In C
@JustoniP Жыл бұрын
Put 7 quarts in, run 3 minutes, let set 10 minutes, check oil level, and top off with 8th quart. Mine takes 7 and 1/2 quarts with filter change. 8 quarts is capacity dry after assembly. 7 1/2 quarts wet. I'd say he over filled it.