How To Do Chimney Flashing

Рет қаралды 74,404

Күн бұрын

Пікірлер: 54

@williamvincent6060 3 ай бұрын

I stared doing all my chimneys this way. Saves so much time and haven’t gotten a single call back since I turned my ringer off

@vjmacintyre 2 ай бұрын

🤣

@deanmurray175 8 ай бұрын

Crazy the table on the lower side of the chimney that you caulk to your flashing is going to trap water someone will definitely be repairing this in the future

@slydog7131 8 ай бұрын

Would you use quarter-size dabs of adhesive instead of a continuous bead or would you leave the flashing on top of the shingles completely to allow water that flows down the chimney wall onto the flashing to drain onto the shingles unimpeded? It seems that putting shingles on top of that bottom flashing would allow for a horizontal movement of water underneath the shingle to go onto the deck at both ends.

@bdc211 Ай бұрын

the bottom of the front metal, goes over top of the shingle enderneath it, so it technically doesnt matter... putting the next shingle over the flashing is just consmetic to hid the metal... lots of people will cut that shingle flush with the sides of the chimney, and leave the metal exposed...

@bdc211 Ай бұрын

considering that the whole thing grts counter flashed, that is.

@norbertsliwinski3355 8 ай бұрын

Nice video - what is the make of the caulking ??

@andyanderson5296 Жыл бұрын

That's not how I would do it

@danielrutherford4842 Жыл бұрын

This is not right at all does no one teach this new generation anything 😂

@reychingon74 Жыл бұрын

Wuao😅 people. If you’ll don’t know how to do the job. Please don’t record it.

@richardcoss8022 2 ай бұрын

I did my roof the way you showed and the rain ran down the side of the chimney and underneath the shingles. You have to put something on the chimney that goes over the ones you showed. Cost $6000 to repair. Please give contact information. My lawyer has to talk with your lawyer.

@bdc211 Ай бұрын

he said "how to flash a chimney", not how to counter flash a chimney....

@jasonward759 Ай бұрын

Exactly you are right@@bdc211

@vintagemxer1846 Ай бұрын

Haha good luck bro

@edgarbaring6319 Жыл бұрын

What no counter?

@brianduda4768 Жыл бұрын

Super helpful video, thanks

@KalePatin 8 ай бұрын

All I do is flashing and custom sheet metal items dormers. standing seam roofs. Etc. It's ALL WRONG sorry man I love my job and your lesson was a slap in the face

@PaulRobertsJoshua-vz4wp 2 ай бұрын

Man I said the exact same thing. I do the same thing and this is definitely how you flash a chimney

@danstutzke3387 Ай бұрын

Why would you use two different colors of flashing.

@stephentyra53 Ай бұрын

You forgot your counter flashing and the counter flashing needs a 1/2 inch bend that a your brick needs a joint grinded for the bend to go into then sealed with polyurethane sealant

@babablacksheep8019 7 ай бұрын

This is perfect. I don’t want to do it the right way anyway. So all the haters in the comments can stuff it.

@mrUsa051 8 ай бұрын

Is it done like others might do? No but this will work. If youre such a good roofer why are you watching this lol

@telosfd 2 ай бұрын

Who guarantees that at 2:32 no water will pass from below!

@KalePatin 8 ай бұрын

There's 100 things wrong with this. Please take this video down your company will get sued

@Sie7eonemillion Ай бұрын

I can’t see any video from you doing that. Where do you upload your videos showing your work ???

@KalePatin 29 күн бұрын

@ you have to pay for that buddy

@KalePatin 29 күн бұрын

@ tell you what I will post a video soon. Good luck. I’m teaching men, not kids remember so I’m not making it dummy proof. It took me years to learn these tricks

@KalePatin 29 күн бұрын

Architectural sheet metal 101

@KalePatin 29 күн бұрын

Look him up. If it like that it ain’t metal work

@lancasteredc7773 6 ай бұрын

That first piece is an apron flashing 😂 that’s not counter at all… you didn’t cut a riglet in the brick… you have to cut the brick a 1/2 inch or more then install a counter in that groove that comes down over the piece you installed… you can’t caulk the top of that piece it will leak in 5 years…

@aaronfagerstrom34 4 ай бұрын

When you learn to do it better, you'll stop cutting into the more permanent structure

@aaronfagerstrom34 4 ай бұрын

This video is not the best way to flash a chimney, but neither is the way you were taught

@BlakeRobinson-l1q 3 ай бұрын

He did u dnt c the brick cut

@DavidGuadron-s2u Жыл бұрын

Por qué ke pones silicon debajo

@whitetail10pointer 8 ай бұрын

Wow.... That is not how you properly flash a chimney

@frankiecastro7749 Жыл бұрын

What fail job people don’t do this please

@realrecognize786 5 ай бұрын

Everyone on his ass 😂😂😂😂😂

@teddyboy252 Жыл бұрын

Good job

@mikethompson7436 4 ай бұрын

I was expecting a builder bob not a handy manny the things people film themselves doing

@cplusroofing-roofingreplac3568 8 ай бұрын

Thats not good dude. You have to overlap 1.5 to 2 inches.

@kennethnettles6191 5 ай бұрын

From a REAL roofers perspective.keep.doing it that way, wel will repair it for a living. What a joke!!!!!!!!!!!

@Squawkimicroblog 2 ай бұрын

That's not how you do chimney flashing. Should be leaded in step fashion with an apron top and bottom laid in to the brickwork pointing

@bdc211 Ай бұрын

in 1965, yes, but since the invention of 30 year caulks and counter flash metal, you dont need to spend that much time and labor grinding mortar out of someones $30,000 chimney....

@bdc211 Ай бұрын

on top of not getting lead in your runoff water everytiime in rains... on every house across the planet..