Very nice demonstration. Every fellow of cardiology should subscribe you. Great teacher.
@jihad4073104 жыл бұрын
please your report for the attached film kzbin.info/www/bejne/bZCWkmSoopymd68
@tonygian23043 жыл бұрын
Geia sou Mano edo Antonis Kardiologos sti germania. Poly oraia ta video sou. Mpravo!
@areenal-taie68363 жыл бұрын
Very Concise and great presentation, Thanks a lot Dr Brilakis
@jeanbaptistegrenouille343 жыл бұрын
Thank you for your exellent demostration sir✌🏻
@tom112985 жыл бұрын
perfect as usual, where do you place the distal balloon‘s marker when performing a POT? and when performing KBI do you use NC Balloon for both vessels? Thank you
@manosbrilakis5 жыл бұрын
Distal balloon marker should be at the carina. Usually use NC balloons for both, but sometimes when NC balloon delivery is challenging will use regular balloons.
@svijaykumarreddy12425 жыл бұрын
distal ballon markar should be kept before carina, for kbi NC ballons should be used
@jihad4073104 жыл бұрын
please your report for the attached film kzbin.info/www/bejne/bZCWkmSoopymd68
@novitasitorus81783 жыл бұрын
i am sorry this might be a stupid question but i d like to know the purpose of rewiring the SB after crushing SB with MV baloon, and do we use the the third (another wire) to the SB? I noticed we still have on the SB then why rewiring it?
@novitasitorus81783 жыл бұрын
oh never mind i found the answer on your other video..thank you
@ВалерийАлмаев-у7л5 жыл бұрын
What your opinion adout two step crushing of side branch stent, when the first step is standart crushing in main vessel, and the second is crushing like POT?
@manosbrilakis5 жыл бұрын
I do not have experience with this technique, but it makes sense if there is big size mismatch between the proximal and distal main vessel.
@ВалерийАлмаев-у7л5 жыл бұрын
@@manosbrilakis Thank You very much.
@micger4 жыл бұрын
I advocate for this
@drprk66144 жыл бұрын
Did the first stent come back too much sir?
@salahuddinsalahuddin32105 жыл бұрын
Thanks forthe nice case presentation .
@dr.erickolmedocardiologo3 жыл бұрын
Where does the second re wire (after MV stenting) cross? Through the proximal strut, like the first one? Or through the distal strut, like in provisional ?
@manosbrilakis3 жыл бұрын
Distal, similar to provisional.
@altayyebalgallaf10733 жыл бұрын
Why do you have to cross the wire through the proximal strut rather than the middle or distal strut after the first crush? At the end you are pushing away the struts either way!
@Slh111744 жыл бұрын
nicely explained
@mehmetdemir23695 жыл бұрын
Thank you for your demonstration. In the culotte stenting I asked "After kissing balloon , isn't final POT ( instead of second POT) necessary?", and you answered as " Another POT should be done if the kissing balloons did not come back enough into the MV. If kissing balloon are back enough in the MV and the MV is well expanded it may not be necessary. " However, now in the double kissing crush tecnique after second kissing balloons, final POT is the 16 th step. Why is there difference between culotte and DK crush techniques after kissing balloons about final POT? Thank you for your answer!
@manosbrilakis5 жыл бұрын
Good point - same concept applies to both culotte and DK crush.
@tuanhoanh11984 жыл бұрын
which technique and how to know the wire has entered the proximal strut of side branch stent in step 7 and 14? I don't have OCT
@singkongho43054 жыл бұрын
The SB stent wasn't crushed, was it? Did the step 6 crush the SB ? Thank you for the video!
@Michaelyinglia4 жыл бұрын
It was - it's just filmed at the weird angle.
@emeschrist4 жыл бұрын
I dont understand, how can you pull back main vessel balloon after SB stent was inflated, to crush SB stent? Once the SB stent is deployed, wire in the MV is automatically jailed, even if you pull back and inflate it would just push and crush the SB tent to one side, not dilating from the lumen of SB stent.
@micger4 жыл бұрын
The wire in MV is unlikely to be jailed due to the smaller size of SB and therefore the SB stent. It is not difficult to pull back on MV balloon. This is something you have to do to know.
@jordanp19114 жыл бұрын
Great demonstration. Curious as to whether the tubing you are using is readily available for purchase or if it is something you worked to have custom developed? Thanks!